Top Soldering Fittings

CERRXIAN Gold Plated 2mm Banana Plug Screw Type Audio Speaker Pin Plugs Cable Connector Adapter 4pcs

  • 2mm Banana Plug Screw connector fittings, no soldering, compatible with the standard sizes of most speakers..
  • No soldering, pin design, just put the wires inside and tighten..
  • Widely used for the connection of terminals on the back of the speaker or on the back of the audio receiver.
  • Each pair of banana plugs includes a black ring and a red ring for color coding of the speaker cable.Check the connections at a glance and easily....
  • The totally height of connector:1.92inch,the The outer connector width: 0.43inch.the inner bottom of the diameter: 4.39mm..
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1 Inch Check Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U2020-0000LFA

  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free.
  • HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite SBDC35 De-Mount Clip, 1-1/4-Inch , Orange

  • Instant Push-Fit connection for increased ease-of-use..
  • No soldering, clamps, unions, or glue required..
  • Fittings certified to 200 PSI and 200°F (93°C)..
  • Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination..
  • Approved to be used underground and behind walls without access panels.
Check Stock

IWISS Angle Head F1807 PEX Pipe Crimping Tool for Copper Rings - 1/2&3/4&1-inch Three Crimper Set with Cutter

  • 【Features】For 1/2”, 3/4”, 1” copper tubing pressing..
  • Automatic locking of pressing tongs. 360-degree rotating head.
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches..
  • 【Ergonomic Design】Extendable handles for improved leverage. Creates leak-free connections, No more brazing, soldering or flaring. Ergonomic handle design and comfortable handle can minimize user fatigue..
  • 【Cutter & Deburring Tool】The cutter can quickly and easily obtain clean rounded cuts on pipes with outer diameter of 1/8" -1 1/4".
  • Deburring tool with high-quality speed steel 360 degree rotary mounting head.
  • Practical tools to make your project easier..
  • 【Wide Application】Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings..
Check Stock

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite U3088FLEX18LF Flexible Water Heater Connector, 3/4-Inch x 3/4-Inch x 18-Inch length

  • INSTALLS IN SECONDS: Water hose connectors require no special tools, no soldering, or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC or PE-RT: SharkBite water heater plumbing fittings fit OD controlled copper, PEX, CPVC and PE-RT. Use for both hot and cold water supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
  • RESIDENTIAL and COMMERCIAL: SharkBite Water Heater Supply Connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

SharkBite 3/4 x 3/4 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22186-0000LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1/2 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22222-0000LFA

  • INSTALLS IN SECONDS: 1/2 Inch ball water valve requires no special tools, no soldering, no crimping or glue.
  • push-to-connect design provides an efficient application that saves time and money.
  • VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite U072LFA Straight Connector Plumbing Fitting, Female Adapter, 1/2 Inch by 1/2 Inch, FNPT, PEX Fittings, Push-to-Connect, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2 inch by 1/2 inch straight female connector requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC: SharkBite straight female connector with FNPT adapter plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • COMPATIBLE PRODUCT: Same as part number U072LFZ and U072LF.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
Check Stock

2 Pex Crimper 1/2 3/4 Gonogo Gauge with Ratchet Cutter 1 5/8 Crimping Plumbing Tools

  • Extendable handles for improved leverage.
  • Creates leak-free connections ,No more brazing, soldering or flaring.
  • Safe Handling with slip-proof rubberised handle grips.
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

Ecumfy 241798224 241642511 Ice Maker Compatible with Electrolux Frigidaire Refrigerators 241798201

  • Lead-free braided stainless steel tubing is a premium waterline repair option offering superior durability to PVC or plastic tubing. A braided tube retains all of the flexibility without any worry of cuts, kinks, or foul water taste..
  • The convenient universal design allows for easy hook-up and quick installation of your water-related appliances such as refrigerators, freezers, icemakers, dishwashers, coolers, or filtration systems. Be sure to confirm the 1/4" connection will suit your application..
  • Screw down compression fittings are a great connector choice for amateurs. They don't require tools or soldering and can be used in tight quarters under a kitchen counter or sink to prevent small jobs from becoming big problems. These fittings offer a leak-free seal even at higher pressure or temperature, but overtightening should be avoided..
  • It is important to account for 5-6' of extra length so you can move your appliance for hassle-free cleaning and repair. This 20' hose is a great choice, however, we also offer a 10' option (04-90210SS-LF) to help meet your specific needs..
  • Comes in Supplying Demand packaging which includes helpful information should you have any issues.
Check Stock