Top Soldering Fume Extractor

SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable

  • High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber.
  • Features a fan speed controller so you can optimize the airflow and noise for your application..
  • Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000....
  • Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace. The filter is made of special foam with refined activated carbon, which has....
  • Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, ..
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station with 5 Pack Carbon Filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

6 Inch Exhaust Fan, HG POWER 308CFM Powerful Kitchen Extractor Fan, Stainless Steel Industrial Vent Blower for Outrdoor Indoor Heating Cooling Ventilation - 7.5\x7.5\ Panel

  • KITCHEN FUME BLOWER: With 308CFM strong airflow and 2800r/min high-speed rate, HG POWER 6-inch kitchen exhaust fan is super suitable for exhausting the fume in cooking, prevent your lung from damaged..
  • PREMIUM MATERIAL: The 6" bathroom extractor fan body is made of high-quality stainless steel, with soft plastic edge protection, which is rust-resistant and protects your hands..
  • THICKENED BLADES: The one-piece metal 7 fan blades make the fan air supply more evenly, reduce the noise, and the air volume is larger and gentle..
  • PURE COPPER MOTOR: Adopted pure-copper motor, the vent fan is high-performance and energy-saving, perfect for exhaust smoke, fume, odor in bathrooms, offices, kitchens, and more places..
  • WHAT YOU GET: HG POWER 12-month warranty and 24-hour customer service. If you have any questions, feel free to contact us. We will reply to you as soon as possible..
Check Stock

JFC Nori Fumi Furikake Rice Seasoning 1.7-Ounce Jars Pack of 4

  • Technical Parameter: Voltage: 110V, Efficiency: 99.97%, Power: 80W, Air Volume: 180m³/H, Noise: 58 dBA, Product Size: 37 x 25 x 40 cm/14.56 x 9.8 x....
  • Multi-layer Efficient Filtration: The selected high-quality deodorizing carbons have a better deodorizing effect on the laser-processed plastic....
  • 58 DBA Low Noise: The pure air fume extractor has a built-in noise reduction module with the 58 dBA the lowest volume, which avoids the noise during....
  • User-friendly Detail Design: The well-designed tight buckles distributed on both sides of the smoke air purifier, no smoke & reliable air tightness.....
  • Easy to Install & Disassemble: The cover of the air extractor adopts the detachable design for easy assembly. The instant disassembly and assembly....
Check Stock

RIDGID 97457 VF6000 5-Layer HEPA Replacement Filter for 5-20 Gallon Wet/Dry Vacuums

  • The product is 97457 FILTER, HEPA VF6000.
  • The product use for fume and smoke extractor filters.
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

  • Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station..
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily..
  • Easy to replace filter, Includes one smoke trap replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

CREWORKS 2 in 1 SMD Soldering Iron & Hot Air Rework Station with LED Display, 898D Soldering Kit with Heat Gun, Digital Electronic Repair Tool with 11pcs Soldering Tips

  • Two-in-one ----- Attention: The voltage of this product is 110V. Rework station and soldering station combine in one, and you can separately control SMD rework and soldering. This machine will save you space, money and keep your work desk well-organized..
  • Precise Temperature Control ----- You can easily adjust temperature with the up and down buttons while the LED screen shows the current temperature for your convenience, 8 complementary tips to accommodate different needs and extends the service life of the soldering pencil. Note: when the soldering pencil is placed on the stand over 10 minutes, the temperature will decrease automatically for safety concerns..
  • Super Quick to Respond ----- With the PID technology for even temperature control, the hot air gun heats up to 450℃ in 5 seconds and the soldering iron heats up to 200℃ in 7 seconds and keeps its temperature, the hot air gun blows at 120L/min for your work efficiency, the built-in fuse protection guarantees 100% safety during operation..
  • Wide Application ----- This rework soldering station is designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature sensitive components, an essential tool for cell phone repair, laptop repair, or circuit boards soldering. Truly a....
Check Stock

YIHUA 8786D-I Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (25 Items)

  • The bundle includes: The 8786D-I Micro-Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 8786D-I station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 10 x assorted iron tips, 4 x assorted hot air nozzles, 1 x solder wick, 1 x solder sucker, 1 x IC extractor, 1 x grounding wire.
  • The 8786D-I micro-soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work..
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to ....
Check Stock

YIHUA 862BD+ Professional Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (22 Items)

  • The bundle includes: The 862BD+ Professional Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 862BD+ station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 5 x assorted iron tips, 4 x assorted hot air nozzles, 1 x cleaning sponge, 1 x pair ESD-safe tweezers, 1 x solder sucker, 2 x holders, 1 x cleaning kit (brass ball & rosin), 1 x IC extractor.
  • The 862BD+ 2-in-1 professional soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work.
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron t....
Check Stock

Hot Air Rework Station, Heat Gun Soldering Station 100-500 °C 110V SMD Hot Air Gun Temperature & Air Speed Adjustable LED Screen Display with 3 Air Nozzles Desoldering Pump Anti-Static Tweezers Cutter

  • Hot Air Rework Station - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs..
  • Hot Air Gun Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds(max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle..
  • Digital LED Screen of Heat Gun Station - Large LED digital screen displays every work state of the hot air rework station, Current Temperature, Standby and No handle insert(no detected heat core)..
  • Specification of Soldering Station- Operating Voltage: AC110V, Output Power:700W, Noise: Less t....
Check Stock

GDSTIME 80mm x 38mm 8038 PWM High Speed Dual Ball Bearing DC 12V 80mm Cooling Fan

  • 【RAPID COOLING】80mm high static pressure fan is suitable for 4U server chassis, inverter, GPU heatsink, solder fume extractor, radiators, etc.
  • or as a replacemment fan for many products.
  • 【POWERFUL FAN】High wind pressure design to get more concentrated and farther air flow.
  • suitable in applications where need maximized airflow and a louder noise level is tolerable.
  • 【LONG-LIFE】Dual-ball bearings rated at up to 50,000hrs.
  • Includes a metal fan grill to protect your hands and fan blades.
  • 【PWM FUNCTION】The fan uses 4-pin interface, with speed regulation (blue wire), speed measurement functions (yellow wire).
  • run at full speed if just red and black wires.
  • 【DC AXIAL FAN】80x80x38 mm (3.15x3.15x1.5 in.) | Rated Voltage: 12V DC | Current: 0.8A | Power: 8W | Speed: 5700 RPM | Noise: 50.7dBA | Airflow: 76 CFM | Static Pressure: 0.73 In H2O.
Check Stock

Hot Air Rework Station 110V SMD Soldering Station with Heat Gun Set Adjustable Hot Air Gun Holder °C/℉ Temperature LED Screen Display Hot Air Station for Electronics Repairing Desoldering Welding

  • Hot Air Rework Station - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs..
  • Soldering Station Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds (max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle..
  • Hot Air Station with ℃/℉ Digital LED Screen - LED digital screen displays show precise temperatures, every work state of the hot air rework station, Current Temperature, Standby and No handle insert (no detected heat core). Adopted PID program to monitor the temperature of the hot....
Check Stock