Top Solenoid Lock And Hood Sensor

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

TOTO UT104E#01 Commercial Washout Urinal With Top Spud, Cotton White

  • When sensor no longer detects User, Solenoid Valve activated.
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

X AUTOHAUX Solenoid Gasket Engine Valve Filter Set for Honda 36172-P08-A01 15825-P2M-005

  • Interchange Part Number of Solenoid Gasket:36172-P08-A01 15825-P2M-005.
  • It's made of rubber, meet the professional specification for stable performance & durable service.
  • This new Solenoid Gasket is great to replace the broken one.
  • Installation: directly replace and easy to install.
  • Note: Please confirm your old sensor cross reference number is exact same as ours before you submit this order.
Check Stock

Von Duprin 050240 6000 Series Solenoid Kit, 24 VDC (FS and FSE)

  • 【Dimension】- 20 x 26 x 39mm/0.78" x 1.02" x 1.53"(L*W*H).
  • 【Good design】- Pull Type, linear motion, frame type, plunger spring return, Low friction to ensure high efficiency and prolong life, 12V DC solenoid electromagnet..
  • 【Advantages】- Solenoid electromagnet has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity..
  • 【Application】- DC 12V solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time, best operate time is in 30 seconds..
Check Stock

Sealed Air Instapak Quick RT #80 Bulk - 72 Bags 22 X 27

  • This bundle will give you the ultimate peace of mind. The PWT-07 waters your lawn at your desired time, and the rain sensor will automatically turn....
  • PWT-07 has an impulse solenoid valve that attaches to any garden hose with a standard ¾” GHS thread.
  • PWT-07 is easy to program with a large selection of durations and frequencies to make watering your garden fully customizable.
  • Rain sensor automatically shuts off the PWT-07 when rainfall is detected.
  • Rain sensor is ONLY compatible with the Instapark PWT-07 Digital Water Timer.
Check Stock

Wellington Parts Corp 46RE 47RE 48RE 518 Governor Pressure Solenoid Repair Kit Heavy-Duty Borg 21350

  • ♫OEM：56028196AD,56028196AA,56028196AB,56028196AC,D22955A,D22958,22216,A12415C,12432A,12328B,52118652,4617210,214-3103,214-3203.
  • ♫Fit: 2000 and up CUMMINS Diesel and gas A500, A518, A618, 44RE, 46RE, 47RE, 48RE.
  • ♫Governor Pressure Sensor Transducer - Rostra 4 Pin Rectangle, Connector, Governor Solenoid, Solenoid Gasket, Transducer has a square connection,....
  • ♫If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you..
Check Stock

uxcell a13060500ux0006 Push Pull Type Open Frame Solenoid Electromagnet, 20N 4.4 lb, 10 mm, DC 24V, 350 mA

  • 【FEATURE】 DC 12V 300mA 5N Force 10mm Stroke Push Pull Solenoid Electromagnet.
  • 【GOOD DESIGN】Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet..
  • 【ADVANTAGES】 Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity.
  • 【NOTED】As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds..
  • 【APPLICATION】DC solenoid electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
Check Stock

Kiro&Seeu DC 12V JF-0530B 300mA 5N/10mm Push Pull Type Frame Electromagnet Keepping Force 5N Travel 10mm Linear Solenoid

  • 【FEATURE】- DC 12V 400mA 45N Force 10mm Stroke Push Pull Solenoid Electromagnet.
  • 【GOOD DESIGN】- Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet..
  • 【ADVANTAGES】- Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high eelectrical conductivity.
  • 【NOTED】- As an actuating element of anmation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds..
  • 【APPLICATION】- DC solenoid electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,door lock,etc..
Check Stock

Garage-Pro Hood Latch Compatible with Toyota Highlander 2010-2013 Assembly Steel with Theft Deterrent USA Built

  • 【Brilliant Compatibility】Hood Lock Top Piece is a Practical accessory fit for Smart (451) Fortwo 2007‑2015.Manufactured according to the original specifications, which are very compatible with your model..
  • 【OEM】Car Front Hood Locking Mechanism Replacing OE numbers for reference: A4517570201.Built to stringent OEM specifications, designed to have the same form, fit and function as OEM original part..
  • 【Diretcly Replace】Front Right Top Bonnet Hood Locking Mechanism Diretcly replace the old or damaged front right hood lock top piece..
  • 【Easy to Install】Bonnet Lock for Smart Fortwo,Simple installation, no complicated tools are needed, save your time and effort.Practical and convenient in use.Such a practical tool you will need it..
  • 【ABS Material】Car Hood Lock Mechanism Top Piece Made with ABS material for maximum durability,....
Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

  • {SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
  • 10- cleanable brass/stainless steel Nozzles (0.012").
  • Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • {MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
  • Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
  • {APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
  • {FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
  • {SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.
Check Stock