Top Solenoid Wire

MaySpare Max 200A Trombetta Continuous Solenoid Relay 3 Terminal Heavy Duty Winch Marine 24106 SPST Solenoid 12VDC

  • Contacts:Normally Open (NO)/ Flat Base Metal Case / 10-32 Terminal.
  • 3 Pole Battery Isolation Solenoid, 12VDC With 2 Copper Point,Housing plated Steel Case / 180Flat mounting bracket./ Mounting holes: 5/16 x 19/32, 2-13/64 on centers..
  • Our Coil Roll is using 180℃ Copper. Max Current Above 200amp/ Rate Current: 100A / Our Cover is Environmental Plating,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion.
  • INSTIALL：One side goes to Battery, opposite side to starter, top screw which is smaller goes to switch or key start only. It is already grounded internal..
  • Note:If it is the energizing circuit which is typically 16/18 Awg , suggest a 5amp fuse.
  • If 10 Awg wire suggest 30 amp auto cicuit breaker.
  • If high output alternator, suggest an 8 Awg wire with a 50 Amp auto circuit breaker.
Check Stock

Relay 350 400 450 660 Reptor Grizzly -2005 2006 2007 2008 for Yamaha Starter Solenoid Relay - ATV Kodiak Wolverine Big Bear Rhino Bruin Starter Solenoid Relay for Yamaha - by HGZKING Black

  • This is BM relay. If yours is MB's yamaha relay, both are applicable. Just note that the position of B and the copper plate are opposite to the original car. If this is the case, connect it in reverse. HGZKING Fits Most Yamaha YFM 350 400 450 660 Grizzly, Kodiak, Big Bear, Raptor, Bruin, Kodiak, WOLVERINE viking,Rx1 Rhin,Onytro Apex,Neutron,Yz450f, Venom,R6r,Apex,series or More Models ATV, 2002 2009.
  • High Performance Relay, Made Of Copper, Prevents Rust and Is Easy To Ignite. Perfect Replacement Of Compatible with Yamaha Relays, Continuous Work..
  • READY FOR ANY BREAKDOWN In case the electrical current spikes too high, the starter solenoid relay is designed to automatically shut the current down. This ensures safe operation at all times..
  • HGZKING QUALITY YOU CAN COUNT ON Our Premium Solenoid Relay is an excellent and affordable solution for Yamaha Quads and YFM ATVs. We offer the highest quality performance ATV parts that will not let you down.
  • Superiority What Is Great Inside The Solenoid The Copper Coil Wire Is More Thicker And More Wire Loops Than Others In The Whole Aftermarket, Which Holds A Stronger Magnetic Switch BY HGZKING..
Check Stock

WATERWICH 12V 250A Winch Relay Winch Solenoid Contactor Winch Rocker Thumb Switch Combo with 6 Protecting caps Universal for ATV UTV 2000-5000lbs Winch

  • 【Superior quality】Made of solid and weather resistant steel and powder coated black surface for great durability.This winch solenoid contactor....
  • 【Easy to install】Pre-cutting mounting bracket for easy installation into control box,The installation procedure included states clearly how to....
  • 【Specification】Rocker Thumb Switch Control Black Wire Length: Approximately 7.2ft, The Stud is 1/4”.
  • / Universal For ATV Winch Solenoid Relay....
  • 【Note】It is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring a 20-30 second cooling time between cycles..
  • 【Applications】12V 250A Winch Solenoid Relay Contactor for all 12Vsolenoid winches,including ATV's,UTV's,SUV's,Jeep's,4x4 vehicles, and 12V Trailer....
Check Stock

Kleenex Kleenex Ultra Soft Facial Tissues Flat Boxes 110 Tissues 12 Pk

  • Irrigation system diagnostic tester combining solenoid activation and wire identification (batteries not included).
  • Easy-to-understand LEDs notify technicians if sufficient voltage is being supplied by the controller and the condition of the solenoid.
  • Activate valve solenoids either from the controller or at the valve.
  • Housed in a high impact ABS plastic case designed to withstand the rigors of daily use in the field.
  • Equipped with premium "bed-of-nails" and piercing pin bent nose clips for use on insulated wires.
Check Stock

AlveyTech 4-Pin, 2-Wire Battery Wiring Harness for Razor Scooters

  • ☆High quality and complete electrics all wiring harness wire loom assembly for GY6 125cc 150cc ATV / QUAD.
  • ☆Fits almost all years Chinese made electric start upright engine GY6 125cc 150cc ATV / QUAD / Coolster / Go Kart / 4 wheelers / Scooter / buggy / Motowork & more.
  • ☆ Easy to plug in design Wiring Harness, which is very handful and practical for rewiring job.
  • ☆High quality Wiring Harness, Kill Light Switch, Ignition Coil, CDI, Rectifier, Ignition Switch, Starter Solenoid Relay, Spark Plug are included. All parts are tested before sale.
Check Stock

Motorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • No power expended once fully open or fully closed.
  • 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

Tempo Communications 24BK Irrigation Tester Kit - Professional Grade, Activate Solenoids, Identify Wires, Test Sprinkler Valves (Latest Model)

  • Irrigation system diagnostic tester combining solenoid activation and wire identification (batteries not included).
  • Easy-to-understand LEDs notify technicians if sufficient voltage is being supplied by the controller and the condition of the solenoid.
  • Activate valve solenoids either from the controller or at the valve.
  • Housed in a high impact ABS plastic case designed to withstand the rigors of daily use in the field.
  • Equipped with premium "bed-of-nails" and piercing pin bent nose clips for use on insulated wires.
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock

KIMISS Car Transmission Solenoid Valve 28250-PRP-013 for Honda and Acura Models Transmission AT Clutch Pressure Control Linear Solenoid Valve 13 * 7cm / 5.1 * 2.8in

  • 【Main Function】This Transmission Solenoid Control Valve is consisting of a spring loaded plunger wrapped with a coil of wire, designed to open or close valves in the valve body to allow transmission fluid to enter..
  • 【Specially for for for for Honda Models】Our Transmission Linear is Specially designed to fit For Acura & for for for Honda vehicles. Please check the size and compatibility carefully before placing an order..
  • 【Professional OE Level】The prossional car transmission shift solenoid valve is an important vehicle electrical system executive control part with higher stablity and reliability, meeting or exceed OEM standards. The replaceable OE number for reference: 28250-PRP-013..
  • 【High Quality Construction】Made of high grade iron, the AT Clutch Solenoid Valve is of strong strength, high temperature and resistance for long time use..
  • 【Easy Installation】Plug and play. Easy to install without extra adjustment, perfectly match the original car. Convenient for assembly and disassemble.If you have any questions, please feel free to firstly check product description for a good solution..
Check Stock

Amico MTS-165, 165 Amp MIG/Flux Cored Wire, TIG Torch, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 110/230V Dual Voltage.

  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function..
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles..
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending..
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control..
Check Stock

S&S Cycle 550-0501 HI-4N Ignition Module

  • Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
  • 12 Volt Coil+5 PIN CDI BOX+4 PIN Regulator+Solenoid Relay+Spark plug.Fits ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more..
  • This kit include 2-pin Male Plug Relay,Ignition Coil 135 Degree Elbow,12v 4-pin Voltage Regulator,5-pin CDI. (Does Not fit for GY6 engine)..
  • The kit Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
  • The items are the same as the pictures.5 Pins CDI module + 2Wire Ignition Coil + Starter Relay Solenoid + 4 PIN Voltage Regulator Rectifier + Spark Plug. Fits for: 50cc 70cc 90cc 110cc 125cc 140cc horizontal engine,Bikes & Quads,ATV, Buggy's..
Check Stock

Emtel 18 AWG - 1 lb (460 gr) Copper Magnet Wire - Enameled Wire for Motor, Transformer, Speaker, Magnetic Coil, Winding Wire - Up to 220°C (428°F) - Double (Heavy) Build Insulation Craft Wire - Spool

  • BEST QUALITY RAW MATERIAL: We use high purity of electrolytic A Grade %99.99 pure solid copper wire in our production..
  • HIGH THERMAL RESISTANCE: 18 Gauge Emtel Enameled Wire is Durable to high temperature as up to 220°C (428°F).
  • UL APPROVED: We produce our enameled copper wire according to NEMA MW-1000 requirements. Our UL File Number is E336772. NEMA Approvals: MW35-C and MW37-C High quality!.
  • STRONG INSULATION THICKNESS: EmTherm 18 AWG enameled copper wire has Double (Heavy) Build insulation with Polyesterimide base coat + Polyamideimide top coat..
  • EMTEL MAGNET WIRE QUALITY: Our enamel insulated copper magnet wire is widely used in the production of transformer, wound coil, electric motor, solenoid, inductors coil, speaker coil, electromagnets, tesla coils , craft wire and other science project applications that require tight coils of insulated wire..
Check Stock