Top Solid Carbide Boring Bar

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

  • ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
  • ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
  • ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
  • ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

  • DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
  • DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
  • CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
  • SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

findmall 8 Pcs Indexable Boring Bars Set,3/4 Shank,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pcs TCMT21.51 & 4 Pcs TCMT221,with Alumium Carrying Case

  • Product - Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use..
  • Parameter - Positive Rake 90Degree Lead, Uses 0.050 key, C6 grade: carbide for steel and alloy steel..
  • Function - Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips..
  • Feature - Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert..
  • Application - Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine..
Check Stock

RIDGID 72327 418 Oiler Gun, All-Weather Pipe Threading Oiler Gun with Simple 2-Finger Trigger Design, heavy-duty 1-Gallon Capacity Reservoir and Handy 54-Foot Hose,Silver,Small

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN：B07RB5BKG7】,16IR AG60【ASIN：B07S1WSNJ6】.
Check Stock