Top Solid drawn Steel Pipe

Heavy Duty Pipe Clamp Jaws, 1 inch Heavy Duty Pipe Clamp Vise Fixture Set Wood Gluing Pipe Clamp Fixture Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly

  • GREAT CHOICE FOR WOODWORKING: This jig is perfect for woodworking work on cabinets and crates. Woodworking cast iron clamps with ergonomic handles make clamping easier and reduce hand fatigue.
  • HIGH QUALITY PERFORMANCE: The pipe clamps are made of solid cast steel, durable and sturdy. Keeps wood stable as you work, a great addition to any woodworking bench in your home or shop.
  • EASY TO USE: The woodworking jig is easy to handle. Just slide the tailgate over the pipe on the other end. Then put the coil spring stopper on the pipe thread at the end of the pipe to prevent the end from sliding out of the pipe during adjustment and away from the clamped workpiece.
  • HIGH QUALITY CAST STEEL MATERIAL: The pipe clamps are made of high hardness and high quality cast steel material, which is durable enough to meet the needs of your daily work. Wide range of uses, can be used as wooden clips, water pipe clips, plastic clips.
  • WIDE USE: Woodworking pipe clamps measure 1" and weigh 1760g/62.1oz (approx.). Often used in metalworking, woodworking and frame assembly, from DIY to industrial product....
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • Fractional Filtration: To achieve a better water-filtration effect, fractional filtration is adopted on our 70 LB commercial grease interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water o....
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes：2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock

Loading Spoon & 3 in 1 cleaning Tool for PAX1 Pax2Pax3 and Other Devices

  • 【EXCELLENT CRAFTSMANSHIP】This pipe holder is made of genuine leather and 3 in 1 stainless steel smoking tobacco pipe tamper , high quality....
  • 【UNIVERSAL】Our high quality pipe stand will perfectly hold regular sized pipes and long tobacco pipes ，it will take up little space and....
  • 【MULTIFUNCTION】3 in 1 design, very convenient and practical.The solid pipe....
  • 【PERFECT FOR GIFT】Stylish and convient, smoking pipe accessories will be perfect for taking it as a gift to your lover, father, brother,....
  • 【FIREDOG GUARANTEE】FIREDOG offers life time warranty on our pipe holder, guarantee with 100% satisfaction service..
Check Stock

Mobile Miter Saw Stand

  • Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Meets FCC Class B and EN 55022 Class B requirements.
  • Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground....
  • Constructed with a solid steel core, abrasion-resistant urethane coating, and stainless steel wear ring for durability.
Check Stock

Toledo Pipe H4S 2\-4\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

  • [Large Cutting Capacity] The cutter can cut 3/16 to 2-inch outer diameter and 1/10-inch thick pipe..
  • [Small Cutting Capacity] The cutter can cut 1/8 to 7/8-inch pipes with a maximum thickness of 1/10-inch. It can be used in narrow environments without restrictions..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
  • [Wide Application] The pipe cutting tool is very suitable for cutting heavy hard materials such as thin stainless steel and all hoses such as aluminum, copper and PVC..
  • [High-Quality] The alloy steel cutting wheel and high-grade steel structure after heat treatment are wear-resistant and rust free. The cutter kit has 6 independent bearings to increase the cutting speed. Accurate rolling control makes every cut in the pipe cutting process smoother and more accurate..
Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

  • [High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • Fractional Filtration: To achieve a better water-filtration effect, fractional filtration is adopted on our 8 LB commercial grease interceptor, whose flow rate is about 4 GPM (15.14 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet....
Check Stock

HouseAid Industrial Pipe Paper Towel Holder for Kitchen, Vintage Style Heavy Duty DIY Rustic Paper Towel Rack, Wall Mount, Antique Finish

  • 【INDUSTRIAL STYLE】With industrial style design, the antique paper towel holder looks awesome and is suitable for rustic and vintage home décor. It's really a great addition to farmhouse styled home!!.
  • 【PREMIUM MATERIAL】Made of high-quality galvanized Steel, the rustic paper towel holder is relatively anti-rust and anti-corrosion compared with other similar steel towel paper holder in moist and wet circumstances..
  • 【SOLID & STURDY】Made of solid flange plate and thick steel pipe, the kitchen paper towel holder is extremely solid and sturdy. The wall-mounted installation method is durable and long-lasting to use..
  • 【ANTIQUE LOOK】Black & Grey coated surface not only provide antique look, but also resist rust, daily fingerprints, and water spots, providing a distinctive look with a muted luster and lightly warm surface. The surface of the vintage paper towel holder is easy to clean and keep neat..
  • 【EASY INSTALLATION】DO NOT need professional installer. With step by step installation guide, the industrial pipe paper towel holder is easy enough to be installed by yourself..
Check Stock

Libraton Pipe Cutter Tubing Cutter 3/16 to 2 Outer Diameter Copper Pipe Cutter Tube Cutter with Deburring Tool Copper Cutter Pipe Cutter Tool for Copper and Thin Stainless Steel Tube

  • [High-quality Blade] Libraton pipe cutter blade is made from SKD-grade material, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

GATE Caster Wheel 8-Inch Spring-Loaded Gate Caster, 275 lb. Capacity, Solid Rubber Tire, 360 Degree Rotation, Heavy-Duty Commercial Agricultural Grade, Universal Mount, by Tech Team

  • For use on heavy wood, cyclone, tubular steel pipe, or agricultural farm gates..
  • The 4.8” coil spring with 5mm diameter tempered steel wire provides 1.375” (35 mm) of vertical suspension compression travel acts like a shock absorber to automatically adjust height for travel over uneven surfaces. The 8” diameter flat free tire means that it stays round and rolling freely even in the dead of winter and eliminates gate sagging and maintains a level gate..
  • The gate wheel caster rotates a full 360 degrees on a heavy duty 3.5” industrial grade ball bearing assembly to travel in any direction. The universal fit 5.7mm thick zinc plated steel mounting bracket has two 11.5mm / .45” mounting holes for solid attachment to wood, cyclone, metal or tubular steel pipe agricultural gates..
  • The 8” x 1.875” flat free solid rubber tire is fitted to a stamped steel rust resistant zinc electroplated hub with 6 reinforcing rivets and 2 sets of ball bearings riding on a ½” steel axel..
Check Stock