Top Solosider Siding Gauge

Metabo HPT Siding Nails | 2 in. x .092 in. | Wire Coil, Smooth Shank | Electro-Galvanized | 3,600 Count | 13333HPT

  • TYPE: 16 Gauge Full Round Head Smooth Shank Wire Coil Siding Nails.
  • APPLICATION: Provides excellent holding power for siding, sheathing, decking and fencing.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV65AH2.
Check Stock

NuMax SL31 Pneumatic 3-in-1 16-Gauge and 18-Gauge 2\ Finish Nailer and Stapler Ergonomic and Lightweight Nail Gun with No Mar Tip for Finish Nails, Brad Nails, and Staples, Gray & Black

  • Multipurpose Versatility: This pneumatic nailer's 3-in-1 design is compatible with 18 gauge staples, 18 gauge brad nails, and 16 gauge finish nails. It features a comfort padded grip, and a lightweight ergonomic design allows extended daily use with less fatigue..
  • Pro Design: This nail gun features a no mar tip that protects your work surface from damage, 360 degree adjustable exhaust that keeps air, dust, and debris out of your workspace, and a reload indicator to make it easy to see when you are running low on fasteners..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

NuMax S50LSDH Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2\ Dual Handle Flooring Nailer and Stapler, Grey and Black

  • Nailed It: This 2-in-1 flooring nailer and stapler works with 16 gauge L-cleats and 15.5 gauge 1/2" crown flooring staples. It features a dual handle design to suit your installation method for solid wood or engineered flooring..
  • Pro Design: This pneumatic nailer features a durable and lightweight aluminum construction, light strike bumper, semi-quick release nose to easily clear jams, and interchangeable base plates enabling you to install solid or engineered flooring from 1/2" to 3/4"..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and DeWalt..
Check Stock

Freeman SSAF1534-2 15-Gauge 34 Degree Angle 2\ Stainless Steel Finish Nails (1000 count) Rust and Corrosion Resistant for PFN1564

  • Nailed It: These 15-Gauge 34 Degree Angle 2" Stainless Steel Finish Nails (1000 count) resist rust and can withstand corrosive environments without staining natural finish woods or pressure treated lumber, making them ideal for both indoor and outdoor applications. They are compatible with most finish nailers capable of firing 2" DA style 15 gauge 34 degree angle finish nails, including the Freeman PFN1564..
  • Pro Design: These versatile nails are designed for finish work such as base board, crown moulding, trim, door and window casings, cabinetry, furniture construction, and more. Each box includes 1000 nails to ensure you have plenty of fasteners on the job..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

Newly Launched Norske Tools NMAP006 13 inch Laminate Flooring and Siding Cutter with CLAMP and Sliding Extension Table including BONUS Honing Stone

  • NORSKE'S 3RD GEN FLOORING & SIDING CUTTER, ONE OF KIND AND MOST UNIQUE.
  • CUTS A VARIETY OF MATERIAL, INCLUDING FIBER CEMENT BOARD (HARDIE PLANK), LAMINATE & VINYL FLOORING, ENGINEERED WOOD FLOORING, VINYL TILE & SIDING UP....
  • SLIDING EXTENSION TABLE SUPPORTS LONGER BOARDS (41” WORKING LENGTH).
  • ADJUSTABLE MEASURING GAUGE PROVIDES QUICK REPETITIVE CUTTING.
  • HEAVY DUTY 22” ALUMINUM FENCE FOR ACCURATE CUTTING.
Check Stock

Freeman PCN65 Pneumatic 15 Degree 2-1/2\ Coil Siding Nailer Ergonomic and Lightweight Nail Gun, Black & PacTool International SA90338 Gecko Gauge, LP Siding Installation Tool (1 Set)

  • 1 of Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black.
  • 1 of PacTool International SA90338 Gecko Gauge, LP Siding Installation Tool (1 Set).
Check Stock

Freeman PCN65 Pneumatic 15 Degree 2-1/2\ Coil Siding Nailer Ergonomic and Lightweight Nail Gun, Black & PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set)

  • 1 of Freeman PCN65 Pneumatic 15 Degree 2-1/2" Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black.
  • 1 of PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set).
Check Stock

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....
Check Stock

Stanley MaxSteel 14-568 9-2/3-Inch Offset Right Aviation Snip

  • Serrated cutting edges prevent materials from slipping during use.
  • Bi-material cushion grip ensures a firm, comfortable grip.
  • High-leverage, compound cutting design for cuts of up to 18-gauge steel.
  • Ideal snips for cutting aluminum, vinyl siding, screening, cardboard, leather and copper.
Check Stock

Contour Gauge Profile Tool, 10 & 6 Inch Contour Gauge Duplicator with Adjustable Lock, Woodworking Tools for Flooring Construction Carpenter, Must Have Tool for DIY Handyman, Construction

  • ...e made of high-strength aluminum alloy, sturdy and anti-rust, ensures proper pattern holding and no shape deterioration..
  • 【Wide Application】This 2 Pack 10” + 6” Profile Gauge Tool is a perfect set for your work. The 10’’ long gauge can easily cover most common obstacles when you’re installing flooring, siding, tile, or some other material. The 6’’ short gauge is useful for smaller spaces where the long gauge can’t work..
  • 【Accurate Tracing】The thinner the pins are, the more accurately the contour gauge will duplicate the irregular shape. Our shape contour gauge pins reach a high precision to 0.05’’/1.3mm. And the pin depth is 3’’/75mm, can contour materials with greater depth, such as a pipe that runs through the floor..
  • 【Good Material And Portable】:Our multi functional profile gauge made from tough, durable ABS plastic with a very strong high quality aluminum core. It won't scratch the original finish of the shape duplicated and won't rust over time make the master outline gauge can be reused..
  • 【Easy to Use】 This tool is very easy to use. Nudge the gauge up against whatever shape you wish to duplicate. Once you’ve got it, don’t forget to clamp the pins by the lock on the gauge to prevent any dislodging. La....
Check Stock

Estwing EFL50Q Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2\ Flooring Nailer and Stapler Ergonomic and Lightweight Nail Gun for Hardwood Flooring with Interchangeable Base Plates, No-Mar Feet and Mallet

  • ...nterchangeable base plates. It comes with a fiberglass mallet, padded bag, air tool oil and adjustment tools..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

RecPro Arctic White RV Fiberglass/Filon Siding 10ft

  • Fiberglass is 102" Wide and gauge: 0.045.
  • Has a protective film that must be removed after installation.
  • PLEASE NOTE** All fiberglass/Filon/flooring/Superflex/EPDM/Roofing cuts are obtained from a master roll. This means the ends will have a rough edge....
Check Stock