Top Spacer Installation Requirements

Supreme Suspensions - Full Lift Kit for 2005-2011 Dodge Dakota 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Round Bend U-Bolts 2WD

  • COMPATIBLE WITH 2005 - 2011 Dodge Dakota (2WD)..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, (2x) High-Strength Steel Rear Lift Blocks, (4x) Round Bend U-Bolts, Installation Hardware,....
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer....
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. *An alignment is always recommended if you are altering....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

House Numbers | Vertical and Horizontal mode | House address plaques | Gift for new house | Address sign | Modern house numbers | custom address sign | housewarming gift | Address plaque sign

  • 【Modern Design】Designed to Classic style.When you install it with floating,it will creat 3D effect which bring the numbers a clean modern look.Our floating address numbers can be installed with spacers for a three dimensional effect with rust protection,very suitable to house for outside.The installations are easy to follow,please refer to the video for installation steps.（For detailed instructions, please refer to the picture）.
  • 【Easy to Install】Can be installed floating or flush.Please use the spacer if you need floating installation.The package contains simple installation instructions and you can easy install with drill gun.Each number comes with an instruction template.Please follow the instruction and find the right place of holes to install.This is a meticulous project.You can install it according to your own ideas, but it is recommended to download our installation video for professional installation..
  • 【5 Inch House Number】Size:5 inches / 12.7 cm in height, 2.8 inches / 7 cm in width, and 0.5 inches / 1.3 cm in thickness.Suitable for house,Street sign,garden and so on.Meets most of 911 community requirements.The floating numbers effect is so nice,they will bring your house numbers a clean modern look,more eye-catching..
Check Stock

Vipcar 4 Pack 1.5 in Hub Centric Wheel Spacer 14x1.5 Bolts-on, 6x135 to 6x135mm Bolt Pattern, 87.1mm Hub Bore, for Ford 2015-2022 F150 2.7L-5.0L, 2015-2022 Expedition 3.5L, Lobo 3.5/5.0L, Navigator

  • ...ainst the liners, brakes, or other suspension parts, by creating additional space between tires and hubs also being a great solution for complex and costly staggered/negative offset wheel setup, making your vehicle more aggressive, tougher, and stable, allowing lift/lowering kits, larger calipers, or traction tires installation..
  • 【Installation】It’s pretty easy to install if you're a skilled mechanic and you got the correct spacers, however, we do not wanna stress too much about how easy or helpful it was and the time that will save as well as your money, Kindly Read the Description Content and Make it Fit First, Professional Installation was Recommended..
  • 【Warranty & Service】ALL VIPCAR wheel spacers backed in 24 Month/50,000 Miles Warranty. For any pre or after-sale replacements or performance questions or solutions, just email us and we will provide a professional, friendly, and supportive reply within 24 hours, let's hit it!.
Check Stock

Retro Self Adhesive 12-Inch Vinyl Floor Tiles, 20 Tiles - 12\ x 12\

  • PACK OF 40 FOR LARGER AREA FLOORING-Save your time to find perfect gaps of 1/2 or 1/4, making flooring installation high efficiently..
  • PREMIUM QUALITY & REUSABLE-This flooring spacer tool for flooring installation is made of quality ABS materials, superior durability, impact-resistant, and built to last and reusable..
  • EASY TO OPERATE & REMOVE-With it's triangle design, spacer blocks are more stable than rectangular/ wedge ones.Neccessary tools to get proper flooring expansion gap, commonly used for LVP/vinyl /hardwood planks/laminate/wood flooring.
  • UPGRADE FLOORING SPACERS-Featured quarter inch and 1/2 inch gap (8-15mm) in 1, MinliGUY floor spacers help you to install floors more smoothly. Simple to place the spacers, it will be stable at the wall..
  • WELL PACKED-Including 40Pcs floor spacers, ideal for amateur, home owner, contractor, or other professional use..
Check Stock

MAXRACING 2-Inch Suspension Leveling Kit Compatible with 2005-2021 F250 F350 Super Duty 4WD

  • COMPATIBLE VEHICLES: 2005-2021 F250 F350 Super Duty 4WD (Does not fully level 2017 models).
  • MATERIAL: The spacer is manufactured from billet aluminum to match you factory suspension. Resistant against wear and tear..
  • FEATURE: Improves the look of your vehicle and increases ground clearance. Levels the front with the rear of the vehicle.The slight lip makes the spacer easily locks in. This lift kit Will raise the front of your F250 or F350 Superduty by a true 2"..
  • EASY TO INSTALL: Simple bolt-on installation and requires no cutting or modification of factory installed parts..
  • ITEM SPECIFICS: Package includes: 2 x 2 inch Front Leveling Spacers, 2 x bolts,1 x instructions.
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Supreme Suspensions - Front Leveling Kit for 2004-2022 Nissan Titan 2WD 4WD T6 Billet Aluminum Strut Spacers - 2' Front Lift (Black) - Microfiber Cleaning Towel Included

  • COMPATIBLE WITH 2004 - 2023 Nissan Titan, 2004 - 2015 Nissan Armada 2004 - 2010 Infiniti QX56. Fits 2WD and 4WD models..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack & Microfiber Cleaning Towel.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! *An alignment is recommended after installing any kit that alters strut geometry..
  • PREMIUM SUPREME SUSPENSIONS MICROFIBER TOWEL: Included a high quality 16" x 16" Supreme Suspensions Black Microfiber Towel with short fibers on one side and long fibers on the other side. Perfect for Job Cleanup, or Fine Detailing..
Check Stock

Steelman Heavy-Duty Tire Valve Stem Puller/Installer Automotive Tool, Notched Polyvinyl Spacer to Protect Wheels and Provide Anchor Points, Pivoting Head, Durable Steel, Comfortable Grip

  • Durable steel - durable steel construction with polyvinyl spacer to protect wheels and rims from possible damage.
  • Notched spacer - vinyl spacer has 5 notches on each side to help provide a secure anchor point on rims during use.
  • Pivoting head - pivoting head freely rotates and is designed to work with most aftermarket wheels and rims.
  • Threaded head - swivel head screws onto valve thread for easy installation and removal of stems without having to remove the valve core.
  • Comfort grip - dual layer handle is ergonomically designed to provide a secure, non-slip grip.
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Protune Suspension Black Billet Front 2' Lift Kit Fits For Nissan Titan XD 2016-2019 2WD 4WD

  • Fits for Nissan Titan XD 2016-2020 2WD 4WD.
  • Installation: Digital PDF included, no hard copy, alignment receommended.
  • Billet Aluminum 6061-T6, guarentee to last, automotive grade accessories.
  • Front Lift Spacers x2, come in brown box packaging.
  • This lift spring spacer will lift your vehicle at stated height, 2" lift does not mean 2" spacer.
Check Stock

OMT 5x4.75 Wheel Spacers, 2 Inch Wheel Spacers with M12x1.5 Studs Compatible with Chevy Camaro GMC Jimmy Sonoma Buick Cadillac Oldsmobile Pontiac, 87.1mm Center Bore Spacers, Set of 4

  • WIDE COMPATIBILITY: Our wheel spacer set is compatible with many 1979 to 2015 Buick, Chevy, Cadillac, GMC, Oldsmobile, and Pontiac vehicles.
  • see below for a full list of compatible models.
  • EASY INSTALLATION: These spacers are precision machined with a 60 degree taper to offer exceptional safety and stability.
  • their intuitive design and clear instructions guide simple and quick installation so you can add style and flair to your vehicle in no time!.
  • 1 YEAR WARRANTY: Increase your axle track, give your vehicle more traction on the road, and enjoy a slicker appearance with this sturdy wheel spacer set, your peace of mind assured by its strong warranty and Orion Motor Tech's usual friendly customer service.
Check Stock

Hooke Road 3.8L V6 Engine Throttle Body Spacer for Jeep JK Wrangler 2007 2008 2009 2010 2011

  • ➤ Hooke Road 3.8L V6 Engine Throttle Body Spacer fits for 2007 2008 2009 2010 2011 Wrangler JK 3.8L Models.
  • Cooler and denser air flow optimizes power and performance.
  • ➤ Throttle Body Spacer:1/2"" inch thick.
  • Moves throttle body 1/2” away from the intake manifold.
  • ➤ Easy bolt-on installation requires no drilling.
Check Stock