Top Spacer Installation Tricks

MAXRACING 2-Inch Suspension Leveling Kit Compatible with 2005-2021 F250 F350 Super Duty 4WD

  • COMPATIBLE VEHICLES: 2005-2021 F250 F350 Super Duty 4WD (Does not fully level 2017 models).
  • MATERIAL: The spacer is manufactured from billet aluminum to match you factory suspension. Resistant against wear and tear..
  • FEATURE: Improves the look of your vehicle and increases ground clearance. Levels the front with the rear of the vehicle.The slight lip makes the spacer easily locks in. This lift kit Will raise the front of your F250 or F350 Superduty by a true 2"..
  • EASY TO INSTALL: Simple bolt-on installation and requires no cutting or modification of factory installed parts..
  • ITEM SPECIFICS: Package includes: 2 x 2 inch Front Leveling Spacers, 2 x bolts,1 x instructions.
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Supreme Suspensions - Front Leveling Kit for 2004-2022 Nissan Titan 2WD 4WD T6 Billet Aluminum Strut Spacers - 2' Front Lift (Black) - Microfiber Cleaning Towel Included

  • COMPATIBLE WITH 2004 - 2023 Nissan Titan, 2004 - 2015 Nissan Armada 2004 - 2010 Infiniti QX56. Fits 2WD and 4WD models..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack & Microfiber Cleaning Towel.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! *An alignment is recommended after installing any kit that alters strut geometry..
  • PREMIUM SUPREME SUSPENSIONS MICROFIBER TOWEL: Included a high quality 16" x 16" Supreme Suspensions Black Microfiber Towel with short fibers on one side and long fibers on the other side. Perfect for Job Cleanup, or Fine Detailing..
Check Stock

Steelman Heavy-Duty Tire Valve Stem Puller/Installer Automotive Tool, Notched Polyvinyl Spacer to Protect Wheels and Provide Anchor Points, Pivoting Head, Durable Steel, Comfortable Grip

  • Durable steel - durable steel construction with polyvinyl spacer to protect wheels and rims from possible damage.
  • Notched spacer - vinyl spacer has 5 notches on each side to help provide a secure anchor point on rims during use.
  • Pivoting head - pivoting head freely rotates and is designed to work with most aftermarket wheels and rims.
  • Threaded head - swivel head screws onto valve thread for easy installation and removal of stems without having to remove the valve core.
  • Comfort grip - dual layer handle is ergonomically designed to provide a secure, non-slip grip.
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Protune Suspension Black Billet Front 2' Lift Kit Fits For Nissan Titan XD 2016-2019 2WD 4WD

  • Fits for Nissan Titan XD 2016-2020 2WD 4WD.
  • Installation: Digital PDF included, no hard copy, alignment receommended.
  • Billet Aluminum 6061-T6, guarentee to last, automotive grade accessories.
  • Front Lift Spacers x2, come in brown box packaging.
  • This lift spring spacer will lift your vehicle at stated height, 2" lift does not mean 2" spacer.
Check Stock

OMT 5x4.75 Wheel Spacers, 2 Inch Wheel Spacers with M12x1.5 Studs Compatible with Chevy Camaro GMC Jimmy Sonoma Buick Cadillac Oldsmobile Pontiac, 87.1mm Center Bore Spacers, Set of 4

  • WIDE COMPATIBILITY: Our wheel spacer set is compatible with many 1979 to 2015 Buick, Chevy, Cadillac, GMC, Oldsmobile, and Pontiac vehicles.
  • see below for a full list of compatible models.
  • EASY INSTALLATION: These spacers are precision machined with a 60 degree taper to offer exceptional safety and stability.
  • their intuitive design and clear instructions guide simple and quick installation so you can add style and flair to your vehicle in no time!.
  • 1 YEAR WARRANTY: Increase your axle track, give your vehicle more traction on the road, and enjoy a slicker appearance with this sturdy wheel spacer set, your peace of mind assured by its strong warranty and Orion Motor Tech's usual friendly customer service.
Check Stock

Hooke Road 3.8L V6 Engine Throttle Body Spacer for Jeep JK Wrangler 2007 2008 2009 2010 2011

  • ➤ Hooke Road 3.8L V6 Engine Throttle Body Spacer fits for 2007 2008 2009 2010 2011 Wrangler JK 3.8L Models.
  • Cooler and denser air flow optimizes power and performance.
  • ➤ Throttle Body Spacer:1/2"" inch thick.
  • Moves throttle body 1/2” away from the intake manifold.
  • ➤ Easy bolt-on installation requires no drilling.
Check Stock

Supreme Suspensions - 3' Front Leveling Lift for 2004-2022 Nissan Titan, 2004-2015 Nissan Armada and 2004-2010 Infiniti QX56 2WD 4WD - Microfiber Cleaning Towel Included with Purchase

  • COMPATIBLE WITH 2004 - 2023 Nissan Titan, 2004 - 2015 Nissan Armada 2004 - 2010 Infiniti QX56. Fits 2WD and 4WD models. *Does Not Fit Nissan Titan Pro4X Model..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack & Microfiber Cleaning Towel.
  • TECHNICAL NOTES: 3 inch front suspension leveling lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! *An alignment is recommended after installing any kit that alters strut geometry..
  • PREMIUM SUPREME SUSPENSIONS MICROFIBER TOWEL: Included a high quality 16" x 16" Supreme Suspensions Black Microfiber Towel with short fibers on one side and long fibers on the other side. Perfect for Job Cleanup, or Fine Detailing..
Check Stock

X AUTOHAUX 2 Inch Front Suspension Spring Strut Spacer Leveling Lift Kit for Nissan Titan 2004-2015 2017-2020

  • Fitment: for Nissan Titan 2004-2015 (Does not for PRO-4X), for Nissan Titan 2017-2020 (Does not for PRO-4X), for Nissan Armada 2005-2015, for Nissan Titan XD 2016 (Does not for PRO-4X).
  • REAL LIFTING HEIGHT: 2", Actual Thickness: 3cm / 1.18". Lift Spacer Thickness and Lift is not a 1:1 Ratio due to the Suspension Shape. The actual thickness of the spacer is thinner than 2 inch front, but these spacers will raise the front end of your truck by a True 2 inch Front..
  • Leveling Kit Feature: The leveling kit raise the front of your pickup to even out the overall body of the vehicle and gives you extra room for larger tires. The spacer is CNC machined out of quality billet aluminum to match your suspension..
  • Easy Installation: In comparison to a suspension lift kit, leveling kits are easy to install. Other than that, you maintain the same steering feel, shock absorption, and handling that you had before we install the leveling kit..
  • Package Included: 2 x Front Suspension Leveling Spacers, 6 x Bolts, 6 x Screws, 12 x Washers..
Check Stock

IRONTEK 2 inch 6 Lug Wheel Spacers 6x5.5 to 6x5.5 6x139.7mm to 6x139.7mm 14x1.5 Studs Wheel Spacer Adapters Fits for Chevrolet Tahoe, Silverado 1500, Express 1500, Cadillac GMC

  • ...Cadillac Escalade, 1999-2012 for Chevrolet Silverado 1500, 1995-2012 for Chevrolet Tahoe,1994-2000 GMC C2500, 1992-2012 GMC Yukon. Please check the Year/Make/Model of your vehicle with the PART FINDER TOOL on the top left corner to confirm before purchase. May fit other vehicles, verify with adapter specifications. Installation instruction is not included, refer to the online installation steps will work, professional installation is highly recommended..
  • 【WHEEL SPACERS FUNCTION】Wheel Spacers Adapters give your vehicle a more aggressive appearance and improve handling and stability. They also increase tire clearance, and fix brake caliper clearance issues. NOTE: Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you have 3 choices: I)Shorten the factory studs. II) The wheels need to have open slots (cavities) between mounting holes. III) Purchase a set of shorter studs and replace them with factory studs..
  • 【PREMIUM QUALITY】Made from High-tensile-strength aluminum alloy (T6 billet aluminum), lighter weight and more sturdy compared to steel spacer. 100% applications tested in rigid durability and fatigue tests to meet SGS standards, High-grade corrosion protection through a special coating process, provid....
Check Stock

Wheel Spacer Set of 4-6 Lug 2 inches 50mm WheelCentric Adapter 6x5.5 - Compatible with Chevrolet GMC & Cadillac - 99-12 Silverado Sierra 02-06 Avalanche 1995-2012 Tahoe Suburban - 6x139.7mm

  • 6 Lug Wheel Spacer Kit 6X5.5 2 Inches - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Chevy, GMC & Cadillac Vehicles - 1999 - 2012 Escalade | 1993 - 2000 C2500 | 1994 - 1998 K1500 | 1994 - 2000 K2500 | 1995 - 2012 Tahoe | 2000 - 2005 Astro | 2002 - 2012 Chevrolte Express 1500 | 2003 - 2012 Savana 1500 | 1992 - 2012 Yukon | 2003 - 2005 Safari | 1999 - 2012 Sierra 1500 | & more. See below for the full vehicle list..
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish - CNC machined anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
Check Stock