Top Special Camera Module

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

  • for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
  • High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
  • Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
  • 5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
  • Connect the included ribbon cable to the CSI (Camer....
Check Stock

Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space Project, Work with V2 Camera on Jetson Nano

  • Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors..
  • Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension.
  • Fresh View: Having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
  • Fresh Option: The extension cable is compatible with Arducam IMX219 Sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Those combinations will also work with the NVIDIA Jetson Nano.
  • Note: Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included..
Check Stock

Arducam Mini Raspberry Pi HQ Camera, 12MP IMX477 with Low Distortion M12 Lens, 25*24mm Camera Board Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: This camera adopts 1/2.3″ 12 Megapixel IMX477 sensor for sharp image, max. still resolution 4056 x 3040, frame rates 1080p30, 720p60 and 640 × 480p60/90..
  • Mini Sized HQ Cam: The IMX477 camera has the same size (25*24mm) and mounting holes as the Raspberry Pi v2, but with better resolution (12 megapixels compared to 8 megapixels) and sensitivity (about 50% more area per pixel for improved low-light performance) than the camera module v2..
  • More Than Ultra HD: Come with an interchangeable M12 lens with a FOV of 75°(H), low distortion, which can capture UHD images while maintaining reality. For more lens kit, you can search for the ASIN:B096V2NP2T to check it out..
  • Wide Compatibility: The IMX477 camera module is not only compatible with Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which need a simple configuration according to the manual before use. The package comes with 1 pcs 150mm/12inch 15pin to 22pin camera cable and 80mm/3.1inch 22pin camera cable..
  • Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
Check Stock

POE IP Camera POE Network Camera ModuleBlueFishcam IP Security Board Camera for DIY/Repair/Upgraded (2MP, 3 Lenses)

  • 2MP 1080P POE IP board Camera network Security camera module 2.8mm,3.6mm & 6mm fixed lenses Hidden Camera Indoor Security Surveillance Motion Detection for DIY/repair/upgrade.
  • Advanced H.265X/H.264 video compression,Super low rate,high definition quality of image.
  • Support various mobile monitoring(iPhone,Android).
  • Support POE IEEE8023af/at, And it's with additional assisted power supply. Power supply required: 12V 2A or above 2A.
  • Package content: 1 piece of POE mini IP board camera/network camera module..
Check Stock

2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera

  • Nice performance: the IR-Cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video.
  • Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
  • IR-CUT camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
  • CMOS sensor interface: the camera module adopts appropriative CMOS sensor interface (CSI), via the CSI bus.
  • A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor.
  • Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + (except Pi Zero/ Zero W).
  • Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light.
  • The brightness of infrared light will adjust automatically based on the dark of the circumstances.
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • 【Smart Diagnostic System】XTOOL D9 is a 2023 new released 9.7” smart diagnostic tool featured OE level all systems diagnostics, Module Topology Mapping, full bi-directional controls, 35+ special functions, ECU coding capabilities, support CAN FD/DoIP/RP1210/OBDII protocol vehicles, comes with Complete Connector Kit and can work with key programmers, inspection camera to extent capabilities. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program....
Check Stock

Varifocal Lens USB Webcam Mini Camera 2.8-12mm Webcamera usb Sony IMX322 USB with Camera,2 MP Full HD 1080P USB Webcam Support 1920x1080@30fps,High Speed USB2.0 Camera Support Most OS/UVC/H.264/Micro

  • High Qualiy Image Sensor:Plug-&-Play (UVC compliant),USB2.0 camera module with 3 meter USB2.0 cable. Embedded with 1/2.9 Sony Imx322 image sensor for better picture performance.2 megapixel low illumination 0.01LUX webcamera usb USBFHD06H Serials use top sensor Sony IMX322 which is the high standard in terms of image quality and sensitivity performance.The Sony IMX322 image sensor helps to produce sharp images effectively. Compression Format:H.264/YUY2/MJPEG optional..
  • USB2.0 High Speed/USB2.0 OTG: USB Connecting port in this camera module support high speed usb 2.0 data transmission,occupy less bandwidth,greatly improved the working efficiency..
  • Max. Resolution:1920(H)X1080(V):High Definition 1920x1080 MJPEG/[email protected]/,2.8-12mm varifocal lens usb camera with IR-cut [email protected] for true color day images/videos (Does not work with 850nm IR illumination),focus adjustable,Webcamera usb module with 2 megapixel high pixel technology for sharp image and accurate color reproduction.This usb with cameras can meet most clarity requirements for different application..
  • Lower Color Reproduction Deviation(Mini Illumination:0.01LUX):USB camera module with High definition and lower Color reproduction deviation produce sharp image and acc....
Check Stock

Zyyini Mini Camera Board, Picture Board with Ribbon, Manual Focusing, for Home

  • 1080P high resolution camera module, bring pure and delicate picture quality experience and the image is clearer..
  • Using high‑definition GC2035 photosensitive chip, strong stability, giving you a good visual experience..
  • Free drive camera module with highest resolution 1600 x 1200, 30 FPS frame rate..
  • With a 60 degree field of view, a wide field of view, support for Orange Pi system..
  • Manual focusing camera, can be directly used in a variety of industry products..
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • Focus lens: OV5647 Pi camera sensor has a fixed-focus lens, which can capture clear and beautiful images quickly and easily, helping you keep happy moments and save unforgettable memories.
  • CSI interface: 5-megapixel camera module uses a dedicated CSI interface, so the higher bandwidth ink that carries pixel data from the camera back to the processor via the CSI bus, interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be applied on zero board perfect.
  • Resolution parameter: 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
  • This is a practical design for you to take some beautiful photos of your family.
  • Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
  • Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
  • Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring y....
Check Stock