Top Special Cpvc Paint

SharkBite U3088FLEX18BVLFA Flexible Water Heater Connector with Ball Valve, 3/4 inch x 3/4 inch FIP, Push-to-Connect Braided Stainless Steel, Water Heater Hose, SILVER

• INSTALLS IN SECONDS: 18” Water heater flex hose line connections require no special tools, no soldering, or glue. Just push to create a watertight seal. Includes integrated ball valve supply shutoff.
• COPPER, PEX, CPVC: SharkBite water heater line plumbing fittings fit Copper, PEX, CPVC and PE-RT. Use for both hot and cold water heater supply lines.
• QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
• CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times in potable and hydronic heating water distribution.
• RESIDENTIAL and COMMERCIAL: SharkBite water heater supply line connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..

SharkBite 25558LFA Dual Compression Outlet Angle Stop Valve, 1/2 inch x 3/8 inch x 3/8 inch Plumbing Fitting, Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

• INSTALLS IN SECONDS: Dual outlet compression SharkBite valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
• PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
• COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
• QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
• RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

• INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
• PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
• COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
• QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
• RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

• Clear Primer, NSF listed (National Sanitation Foundation).
• Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
• Low VOC (volatile organic compound) solvent cement.
• A clear aggressive primer for use on PVC and CPVC pipe and fittings.
• Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
• Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

• J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
• Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
• Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
• Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

• For use with OD controlled copper, CPVC or PEX pipe.
• No soldering, clamps, unions, or glue required..
• Connects copper, PEX, and CPVC pipe in any combination..
• Designed for vertical and horizontal installation.

Husky 5/8 in. Junior Tube Cutter

• Husky 1-1/4 in. ratcheting PVC cutter cuts up to 1-1/4 in PVC (1-5/8 in. O.D.) for cutting PVC, CPVC, PP, PEX, PE, rubber hose.
• Husky flexible tube cutter cuts PVC, CPVC, PEX pipe and flexible pipe.
• Comes with foldable pouch for storage and transportation.

Stone Pro, Traverfill Pro Adhesive

• Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
• Promotes maximum fusion between pipe and fitting during welding.
• Specially formulated for wet and/or quick-set applications.
• Compatible with all classes and schedules of PVC and CPVC.
• Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
• contributes toward satisfying Indoor Environmental Quality credits for LEED v4.

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

• J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
• Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
• Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
• Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC....

Plumb Pak PP32-10BRLF Straight Tube Transition Union 3/8 X 1/2 in Compression X Cpvc Brass

Rectorseal 55929 1/4 Pint Cl-3L Low-Voc Pvc, Cpvc, Abs Cleaner

• CL-3L is a clear cleaner for use on all PVC, CPVC and ABS pipe, tubing, and socket-type fittings.
• Acts as a cleaner by dissolving grease and dirt and helping prepare the bonding surfaces for solvent cementing.
• Helps make a clean, professional looking joint.

The Frost Pipe.The Pipe You Make from ICE!

• INSTALLS IN SECONDS: 1/2 inch push-fit inlet x 3/4 inch MHT outlet Sillcock Valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
• PERFORMANCE: Rated to 200 PSI and 200 Degree F. Use in Potable water and Hydronic Heating applications.
• VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
• QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
• RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.