Top Spindle Assembly

Milling Machine

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle....
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe.....
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and....
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on....
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into....
Check Stock

Livinia Toto Malaysian Oak Dining Chair Set of Two, Country Farmhouse High Spindle Back Wooden Side Chairs (Black)

  • 【SET OF TWO】 Your purchase includes a set of two side chairs. Perfect as office desk chairs or as dining chairs in the kitchen and restaurants, especially for those who love genuine wooden products. Choose from the 3 color variations..
  • 【SPINDLE BACK DESIGN】 Lower seats with the classy long, high spindle back and wide seating make this chair adorable and elegant at the same time, while also keeping you comfortable.
  • 【BUILT STURDY】 Completely made of natural Malaysian Oak, the chair is built to be sturdy and durable. The arched high spindle back is not only aesthetically pleasing but also provides comfortable backrest. The ergonomically designed and wide seating will provide you comfortable seating for a long duration of time..
  • 【EASY ASSEMBLY】 Straight forward, easy assembly required with instruction, parts and hardware included..
  • 【DIMENSIONS】 18.9" x 19.2" x 33.2" The seating may be lower than your typical dining chair, so be sure to check the dimensions!.
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

Knit Picks Hand Operated Yarn Ball Winder (Purple)

  • WINDS YARN: Knit Picks Ball Winder helps you transform yarn hanks and skeins into compact center-pull cakes that sit nicely while you knit and crochet.
  • SIMPLE TO USE: Easily winds up to 100 grams or 3.5 ounces of yarn.
  • from lace and fingering weights to worsted and bulky weights.
  • QUICK ASSEMBLY: To use just attach to any table edge or surface up to 1-1/2″ thick, twist on the spindle, position the guide arm and start winding.
  • EASY STORAGE: The removable spindle and a foldable guide arm make for compact storage while still allowing quick and easy assembly.
  • GREAT FOR CRAFTING: Lets you organize wound yarn into usable cakes.
  • use with Knit Picks Yarn Swifts for best results.
Check Stock

MYSWEETY 2 in 1 7000mW CNC 3018 Pro Engraver Machine, GRBL Control 3 Axis DIY CNC Router Kit with 7W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ️【Versatile】- Capable of cutting all types of plastics, woods, acrylics(Only suitable for spindle milling cutter engraving), PVCs, and PCBs, the MYSWEETY can be used on a wide range of projects and materials..
  • ️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

LAMXD Yarn Ball Winder and Yarn Umbrella Swift ¡

  • Length-36 cm | Depth-12 cm | Height-25 cm | Net Weight - 4.2 Lbs | Thread Holding Tower for Improved Consistency & Great Center Pull Balls.
  • Wind balls upto 1 pound | Use of fine quality bearing provides super smooth winding of yarn.
  • Minimum Assembly Required - To use just attach to any table edge or surface up to 1-1/2" thick, twist on the spindle, position the guide arm and start winding | Table Clamp Supplied | Belt Operated Mechanism Provides Much More Space | This Yarn Winder is UNIQUE, AFFORDABLE and DURABLE.
  • Anti-Skid Base to prevent the winder from sliding/scratching your table | Anti-friction bearing on the spool side for free rotation which provides super smooth winding.
  • EASY STORAGE: Removable spindle and a yarn guide arm that folds make for compact storage while still allowing quick and easy assembly.
Check Stock

LEAPGOMAX Golf Cart Spindle Bushings Kit fit EZGO TXT/PDS 2001-UP Gas & Electric, Bushing Spindle, King Pin Tubes, Claw Copper Sleeves Kit, OEM#70648-G01 70749G01 70745G01

  • ⛳Fits Golf Carts: Colf Cart 2001-current E-Z-GO Gas & Electric TXT/PDS(Will not fit for EZGO RXV)4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400..
  • ⛳Fits ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200..
  • ⛳Fits Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles..
  • ⛳High quality with heavy duty exceed OEM quality Golf Cart Spindle Bushings Repair Kit Assembly..
  • ⛳Package: 2 PCS Spindle King Pin Tubes, OEM# 70745-G01,614034, 601707.
  • 2 PCS Spindle Bushing with Flange, OEM#70648-G01, 632925, 601915.
  • 2 PCS Spindle Bushing without Flange, OEM#70749-G01, 632926, 601916.
  • 2 PCS Spindle King Pin Bolts, OEM#00407-G6, 620380.
  • 2 PCS Thrust Washers, OEM# 70754-G01, 601920.
Check Stock

Spindle Assembly for Craftsman/Hus/Ariens/Poulan, Mandrel Assembly for 42" 46" 48" 54" Mower Deck, Come with All Mounting Hardware Including Threaded Bolt and Grease Fitting, Replace 187292 192870

  • 【Compatibility】Qualitied spindle assembly directly fit for many mower tractor，including craftsman, hus, ariens, poulan，ect. Poulan pro, roper, sears. Fits 42", 46", 48", 54" decks. [NOTE: It will not fit any Z Turn Mowers.].
  • 【Specific Model】Great replacement Spindle for Hus 187281, 532192870, 587819701, 532187292, 532187281, 539112057, for Arians 21546299, 21546238, for AYP 192870,187292,532192870..
  • 【Easy to Install】Come with 4 threaded mounting bolts, pulley nut, blade bolt and washer which will make the replacement to be easier and more convenient..
  • 【High Performance】Made of sturdy material, well inspected and tested by manufacturer. The spindle is greaseable, it has grease fittings at the top for maintenance..
  • 【Great Design】The mower deck spindle is pre-greased, equipped with a grease fitting on the side of the spindle for maintenance, recommended to grease prior to use..
Check Stock

Livinia Toto Malaysian Oak Dining Chair Set of Two, Country Farmhouse High Spindle Back Wooden Side Chairs (Natural Oak)

  • 【SET OF TWO】 Your purchase includes a set of two side chairs. Perfect as office desk chairs or as dining chairs in the kitchen and restaurants, especially for those who love genuine wooden products. Choose from the 3 color variations..
  • 【SPINDLE BACK DESIGN】 Lower seats with the classy long, high spindle back and wide seating make this chair adorable and elegant at the same time, while also keeping you comfortable.
  • 【BUILT STURDY】 Completely made of natural Malaysian Oak, the chair is built to be sturdy and durable. The arched high spindle back is not only aesthetically pleasing but also provides comfortable backrest. The ergonomically designed and wide seating will provide you comfortable seating for a long duration of time..
  • 【EASY ASSEMBLY】 Straight forward, easy assembly required with instruction, parts and hardware included..
  • 【DIMENSIONS】 18.9" x 19.2" x 33.2" The seating may be lower than your typical dining chair, so be sure to check the dimensions!.
  • 【CUSTOMER SERVICE】 If you have any problems or questions about your purchase or any other products for sale, our customer service representatives will assist you in any way necessary. Feel free to contact us anytime!.
Check Stock

Gift Mark Children's Spindle Rocking Chair, Cherry

  • Hand crafted spindle rocking chair is designed for beauty and durability.
  • Each spindle is Hand carved, with great detail.
  • Rocking chair is built to heirloom-quality, and will be part of your family for generations..
Check Stock

FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

  • Structure Upgrade: Masuter Pro is an All-Aluminum CNC router machine, which makes the machine sturdier than the last version. The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy..
  • Upgraded Controller Box: The control board is upgraded to a compact controller box. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance..
  • Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien 20W/40W modules. The 65mm clamp is for customized upgrade, such as 65mm router, 1.5KW spindle, etc. It also supports the 69mm spindle clamp, please buy separately..
  • Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. It takes only 10-15 minutes to fully assemble..
  • Large Engraving Area: The active working area is 15.75” x 15.75” x 2.36” (400 x 400 x 60mm). It is large enough for daily woodworking. It supports extension kit to enlarge the working area.
  • and the extension kit will be available soon!.
Check Stock

Desktop CNC Router Machine 3018-SE V2 with Transparent Enclosure, 3-Axis Engraving Milling Machine for Wood Acrylic Plastics Metal Resin Carving Arts and crafts DIY Design

  • This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly..
  • It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern..
  • Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast assembly. A detailed manual will guide you put the enclosure together..
  • 3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic and carve on soft metals surface like aluminum. It’s great for home DIY and small business..
  • The control board is based on open-sourced grbl software. It supports Windows XP/7/8/10, Linux, Mac OS. It requires knowledge to make G-code. Pls contact us for tutorials if you are new to G-code..
Check Stock