Top Spindle Collet

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Water Cooled Er20 Collet Chuck CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Water-cooled Motor Spindle and Matching Inverter.
  • Four bearing in our spindle motor (2pcs 7005+2pcs7002).
  • 2.2kw Water-cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • ...ecial angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and changer maintenance..
  • Free Wrenches & Pull Studs: Three free wrenches for extra tightening and easy release if necessary. 10 free HAAS pull studs. Ideal for CNC Lathe/milling, drill press, and heavy duty hand tools..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

PROXXON Bench Drill Press TBM 115, 38128 , Green

  • Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
  • High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
  • 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
  • Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
  • Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.
Check Stock

CNC Spindle CNC Motor 220V 7.5KW 7500W Square Air Cooled Spindle Motor 4 Bearings ER32 18000RPM 300HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with 220v,300HZ vfd . 2 Poles, Collet ER32-6mm,Voltage: 220V ,Power: 7.5KW, Frequency: 300 Hz,....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , The appearance design of square spindle motor have 2 sides mounting holes to....
  • 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.
Check Stock

Huanyang Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet for Engraving Machine

  • 【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
  • 【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
  • 【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
  • 【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
  • 【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock

Thomegoods 42999 1/4\ Router Collet Fits for Porter Cable,Delta, B&D

  • For use with 1/4 inch shank router bits | 1/4 inch router collet.
  • Material: Steel | Helps decrease the amount of lost bits.
  • Color: Black | Diameter: 0.25 inch | Length: 1.25 inch | Threads: 20tpi.
  • Outside Diameter: 0.25 inch | Collet Nut size: 1/4 inch.
  • Delta: SH100 Type 1 Bench Shaper 43-505 Type A Router Shaper 43-355 Type 1 Shaper 43-357 Type 1 Spindle | Black and Decker: 8902 Type 2 2-1/4 HP Router Motor 7519 Type 3 3 1/4 HP Router 690LRP Type 1 1-3/4 HP Router 7616 Type 1 1 HP Router 7616 Type 2 1 HP Router.
Check Stock

SILIVN 26PCS Spring Collet Set ER32 for CNC Engraving Machine & Milling Lathe Tool Workholding Engraving Collets ER32

  • Gripping Range ：This ER32 spring collet set contains these size: 1/32",1/16",3/32",1/8",5/32",3/16",7/32",1/4",9/32",5/16",11/32",3/8",13/32",7/16",15/32",1/2",17/32",9/16",19/32",5/8",21/32",11/16",23/32",3/4",25/32",13/16".
  • Wide Application - ER32 collet set is suitable for boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing.
  • Premium Quality - These ER32 spring collets are made of high quality spring steel. They are stable and practical in performance..
  • Easy To Distinguish - Each collet is well packed in separate protective container with label. Moreover, each collect is mark with size, so it’s easy to distinguish them..
  • GUARANTEE SERVICE: We offer 100% Satisfaction guarantee and reliable customer service within a 24 hour time support, 30 day back money guarantee - 12 month warranty.
Check Stock

Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz Φ80mm ER20 Collet HUANYANG CNC VFD Motor Factory Direct Sales

  • The item is Water Cooled 220V-2.2KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 220v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 110v voltage at 50hz or....
  • Lubricated with grease, which is resistant to 200 degrees high temperature..
  • Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding..
Check Stock