Top Spiral Bending Machine

uxcell PCB Drill Bits 0.4mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)

  • Specification: Cutting edge diameter (CED): 1.6mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

Aviditi P6036KHD Jumbo Mailing Tubes, 6\ x 36\

  • Oversized tubes provide maximum storage and protection.
  • 0.125 inches thick spiral wound fibreboard.
  • Measures 36-inches length by 6-inches width.
Check Stock

Micro Drill Bits -10Pcs Tungsten Carbide Macro Drill Bits Set, PCB Drill Bit Set, Mini Drill Bit 1/8\ Shank for Print Circuit Board, Amber, Jewelry, CNC Punching Engraving(1.1-2.0mm)

  • Specification: Cutting edge diameter (CED): 0.2mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)

  • Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

HOHIYA 84 Inch Metal Christmas Tree Spiral Wrought Iron Ornament Display Stand Holder Hanger Wire Hook Hanging for Halloween Waterford Swarovski Lenox Balls Bauble Decorations Gift Craft Black

  • Showcase your christmas ornaments and with this distinctive black metal christmas tree ornament display stand. Sturdy metal branches on the wrought iron christmas tree spiral metal ornament display stand support christmas ornaments without bending or sagging..
  • Prefectly sized to display your christmas baubles, the HOHIYA black metal christmas tree spiral metal ornament display stand with 65 ornament hooks, measures 84”H when fully assembled and 23”W. Spread festival holiday cheer all throughout your home..
  • Black metal christmas tree spiral metal ornament display stand exceptional stability from the Round iron base lets you share cherished christmas ornaments with confidence..
  • Multifuctional large black metal christmas tree spiral metal ornament display stand can be used year-round at home, shop or commercially..
  • Sturdy and heavy the black metal christmas tree spiral metal ornament display stand is assembled about 10~15 mins with screwdriver. The ornament tree display stand boasts long-lasting welds as well as a rust-resistant finish that complements your glass ornaments and christmas bauble on your metal tree..
Check Stock

Aviditi Kraft Heavy Duty Mailing Tubes with Caps, 3' x 36', Pack of 24, for Shipping, Storing, Mailing, and Protecting Documents, Blueprints and Posters

  • Economical kraft mailing tubes are great for document storage or for mailing.
  • 0.125 inches thick spiral wound fibreboard.
  • Measures 36-inches length by 3-inches width.
Check Stock

CAGIE Spiral Notebook for Work 240 Pages 5 Subject Notebooks College Ruled with Dividers Tabs A5 Small Spiral Bound Journal for School Office Supplies Note Taking 5x7 Black

  • ...her writing process and prevent ink bleeding through or ghosting. And On the top has pre-printed headers where you can fill in the date. Great for keeping track of Activities or Reminders!.
  • DOUBLE SPIRAL BINDING: This work notebook is nicely bound with coated double spiral wire. Spiral is sturdy and not easy to bending coming apart after months of use. The spine is big enough to keep a pen and allows to be folded through 360° flat to write. Premium work and school supplies, super suitable for note taking and to-do lists..
  • STURDY TEXTURED COVER: The 5 subject notebook has a hard plastic front and back cover, which protects the papers and keeps the spiral notebook 5x7 looking very nice. And its special modern mechanical style, makes the small notebook looking super cool and unique, good for value. Cover Size: 6.25""x8.25"". Paper size: 5.6''x 8''..
  • LIFETIME QUALITY ASSURANCE: We are committed to providing you with the good quality and service on our spiral notebooks college ruled. Once there is a quality problem, please feel free to email us, and you will get a brand-new replacement or full refund!.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

SORANGEUN Auger Drill Bit for Planting 1.6x16.5in, Post Hole Auger for Planting Bulbs, Easy Post Hole Digger with Drill for 3/8”Hex Drive Drill

  • ...t with strong bit, will not break easily. The use of special processing drill bits for reinforcement eliminates the defects that are prone to damage to old garden spiral drills..
  • Long Size - Extended length 16.5inch will make you stand up digging holes for planting instead bending over, can reduce fatigue caused by prolonged bending，really necessary tool in your planting season..
  • Quality Material - Auger drill bit made of PCM steel with black paint coated for long service time. The earth auger do all of the work, and all you have to do is drop in the bulb. The pointed bit has a small hole on it for easily hanging storage when not in use..
  • Scope of Application - 18V or larger planting auger for cordless drill recommended. Suitable for 3/8 inch hex drive electric drill. Note: Not for use with large or solid rock..
  • Widely Applied - Drill auger for anyone who loves doing garden work, will help them planting potted plants, flowers, bulbs, soils, paint and so on. Also can bring earth drill on vacation to drill a hole in sand to anchor your beach umbrella..
Check Stock