Top Spiral Flute Step Drill

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • FTG Parabolic Flute offers wider flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow. The parabolic spiral allows chips to flow up quickly leaving less damage to be corrected after drilling. Package contains 3 Piece Same Size 9/64" (#6 screw) Replacement Tapered Drill Bit Only Without Four-cutter Countersink, made to replace the 9/64” bit of #6 Countersink FTG 6810PRB.
  • FTG Parabolic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
Check Stock

CORTOOL Step Drill Bit HSS Spiral Groove Step Bit 1/4" to 2-3/8" Step Drill Bit for Metal Plastic Wood, 12 Sizes Multiple Hole Stepped Up Bit for DIY Lovers

  • ✅ The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The titanium coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • ✅ The spiral dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up..
  • ✅ The rapid strike tip drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness..
  • ✅ CORTOOL drill bit is bigger in size so it can drill holes with larger dimensions..
Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4mm / 0.157".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 3.5mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 3.5mm / 0.138".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

uxcell PCB Drill Bits 4.45mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4.45mm / 0.175".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

CORTOOL 2-Inch HSS Spiral Groove Step Drill Bit, 10 Sizes Cobalt Added High Speed Steel 1/4" to 2" Drill Bit for Sheet Aluminium Metal Wood, Big Multiple Hole Stepped Up Bit for DIY Lovers

  • The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The cobalt coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • The spiral dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up..
  • The rapid strike tip drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness..
  • CORTOOL drill bit is bigger in size so it can drill holes with larger dimensions..
Check Stock

IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119)

  • Designed to remove broken studs, bolts, socket screws, and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Easy out style spiral flutes embed themselves to increase grip as resistance increases.
  • Extractor size and recommended drill bit size are etched on each tool.
  • Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5.
  • drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case.
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

HOHXEN 3 Packs Spiral Step Drill Bit Set with 4-12mm/4-20mm/ 4-32mm, Total 32 Sizes, 1/4\ Hex Shank Cone Titanium Coated High Speed Steel, Multi-Functional Industrial DIY Metalworking tools

  • 3 standard SAE Spiral step drill bits can drill 32 different size of holes on different thickness of materials.The 3 Cutters Come in the Following Sizes: 4-12mm: 4mm,6mm,8mm,10mm,12mm.
  • 4-20mm: 4mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm.
  • 4-32mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm..
  • Made with drop forged heat treated high speed steel (HSS) with titanium nitride coating for longer life time..
  • 4241 high-speed steel, used in hardness under 25 ¡ã workpiece, the plate thickness under 5 mm..
  • 1/4" round shank (6.35mm)can be easily fit into power driver, drill and press drill. Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip..
  • Comes with 3Pcs 1/4 Inch round Shank HSS Titanium Coated Step Drill Bit Set - 4-12/4-20/4-32mm With Pouch.Suitable for punch holes through sheet metal, iron plate, aluminum plate, brass, wood, plastic, etc..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock