Top Spiral Fluted Dies

Topline #44 Wire Size HSS Drill Bit 6pcs Bright Finish M2 Grade

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace Standard 907.
Check Stock

Qualtech 1-1/2\ HSS 4MT Taper Shank Drill Bit, DWDTS1-1/2

  • Cobalt taper shank drills are made of heat resistant cobalt..
  • Engineered with heavy-duty construction to perform well in tough, hard-to-machine materials..
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Designed to perform in a broad range of materials in the iron and steel families.
Check Stock

Accusize Industrial Tools 1/4'', 1/2'' and 1-1/4'' 60 Degree Indexable Carbide Countersinks, 0046-0960

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Check Stock

Whiteside HC5122 Hercules Max Life Up/Down Cut Spiral Router Bit 1/2\ Shank

  • Whiteside HC5122 Hercules Max Life Up/Down (Compression) Cut Spiral Bit 1/2"SH.
  • Designed for heavy-duty workloads and engineered for longer bit life on high-wear applications, such as MDF and laminate.
  • The fluted design of this bit makes a compression cut that leaves smooth, clean edges on both top and bottom surfaces of your project, reducing the need for edge finishing later.
  • Fully warranted against defects in workmanship and materials.
Check Stock

Drill America 1' Reduced Shank Cobalt Drill Bit with 1/2' Shank, DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

Drill America - DAM18X1/4 1/4' x 18' Carbide Tipped Masonry Drill Bit, Dam Series

  • Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Designed for use in portable electric drill.
Check Stock

Drill America - DWRRTPS6 #6 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Available in round shank with square end.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • 0.2773-inches short end and 0.354-inches large end.
Check Stock

Drill America #43 High Speed Steel Black Oxide Drill Bit (Pack of 12), DWDN Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for production, maintenance or portable drilling jobs.
Check Stock

6PCS/lot Balloons Metal Die Cuts,Balloons Party Festival Invitation Card Cutting Dies Cut Stencils for DIY Scrapbooking Album Decorative Embossing Paper Dies Card Making

  • ...ved ones, adding a wonderfully intricate feature to embellish your papercraft projects. This will be perfect for cards celebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
  • 【Function】decorations for paper dies cutting for boys for girls best birthday gift Balloon Butterfly Birch Trees Fish Spider Scrapbooking Die Cuts Carbon Steel Stencil Metal Album Card Paper Craft Decoration DIY Template Metal Cutting Dies Christmas Embossing Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
  • 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting card making.Embossing Folders and Stamp Also match in our Eswala store..
  • 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies ....
Check Stock

Drill America - DWDCO43P12 #43 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

Drill America DWDCO40P12 #40 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

Drill America DWDCO44P12 #44 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock