Top Spiral Hand Drill

Bon Tool Riverworks 16510 27-418 Post Hole Digging/Tamp Bar, 6-Foot

  • This ground drill with a handle will help you drill all the holes without stooping over and you will not even get your hands dirty!.
  • The drill can also be used to aerate compost, mix soils and fertilizers, or make holes for fertilizer spikes. The extension tubes that included are used to extend the ground drill..
  • Made of super strong steel, the drill is very strong for various uses. In addition, equipped with a handle, it offers extra convenience..
  • Drill length: 3'3" / Handle length: 23.6" / Round tube dia: 0.98" / Square tube size: 1.18" x 1.18" / Spiral dia: 7.87" / Spiral distance: 1.97" / Length of spiral: 9.84" / Double spirals.
  • Extension tube Length (per tube): 3'3" / Square tube size: 1.18" x 1.18" / Material: Steel / Color: Black / Delivery includes a ground drill, a handle, 8 pcs of extension tubes, some screws..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Jayzod 4"x12" Solid Auger Drill Bit for Planting，Garden Auger Spiral Drill Bit,Bulb & Bedding Plant Augers,Plants Drill bit for 3/8” Hex Drive Drill

  • [Dimensions of drill bit]: (spiral 4inch x height 12inch)/(10cm x 30cm), top shaft 1.4 inch/3.5 cm, suitable for type 3/8 inch caliber electric drill. There are slight errors in the measured data. For your reference, we have selected integers..
  • [Not Recommended]: We do not recommend the use of drill bits in land with a large amount of stones, because the desired effect cannot be achieved and the drill bits will be damaged..
  • [Correct use]: Hard land is wetted first, then low speed is used to drill out the shape first, and then the speed is gradually increased to ensure that the shaft has an adaptive process to avoid fracture. When in use, ensure that the drill bit is perpendicular to the ground so that the shaft can be uniformly stressed, thus protecting the stability of the shaft..
  • [Applicable voltage]: It is very important that you match the drill bit with ≥ 18 V to ensure that the electric drill has sufficient rotating force to drive the drill bit so that you can obtain excellent use experience..
  • [Various Uses] This solid spiral drilling machine is not only widely used in planting bulbs, potted plants, vegetables, flowers, bare-rooted trees and shrubs, but also can drill holes in sand to fix beach umbrellas, drill holes for tents, etc. The “4&#....
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stock

Jayzod Auger Drill bit for Planting 4\X25\ Garden Auger Spiral Drill Bit,Bulb & Bedding Plant Augers,Plants Drill bit for 3/8” Hex Drive Drill

  • 【strong and sturdy】The auger's dimension spiral 4inch x height 25inch(10cm x 63cm),2.61LB for the auger,2.64 pounds for the total item(with package) .This garden auger spiral drill bit is so easy to use, just put it in your drill, drill a hole anywhere from an inch to several inches deep in just a couple seconds, drop your flower bulb in the hole and enjoy the beautiful flowers next spring..
  • 【Effective augers for digging holes 】Jayzod’s heavy duty steel augers work with any 3/8" or larger chucked drill, 18V or greater drill recommended. Digging hundreds of holes in minutes without worry about bending or broke,which will maximize improve your planting job..
  • 【18V or larger recomended】Save time and energy. Use in any electric or cordless drill that can accommodate a 3/8" or larger drill. Make sure your drill have enough power and 18V or above will work better.Nice augers for digging holes in your yard..
  • 【Various Applications】This post hole digger not only widely used for planting bulbs,potted plants, vegetables, flowers, bare root trees and shrubs,but also nice for drilling a hole in sand to anchor your beach umbrella,drilling holes for tents and so on..
  • 【user-friendly size design】4"x25" design will help save your back, don’t ne....
Check Stock

Topec 35-Piece Screw Extractor and Drill Bit Set, bolt extractors, Multi-spline Extractors, and Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings

  • 35-PIECE MULTIFUNCTIONAL SET- 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits, 6pcs spiral screw extractors,.
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 35 models of parts including imperial sizes such as: 1/8", 5/16", 5/8", 7/16", 11/32", 1/4" etc. You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill these fasteners.
Check Stock

Royars Upgrade 3pcs Auger Drill Bit for Planting Garden Bulb Planter Tool Post Hole Digger Bulb Planter Tool 1.6"x9" 2"x15" and 3"x12" for Sand/Wet/Dry Soil

  • ...for you to use.In addition,the entire frame of our bulb planter is sprayed with environmentally friendly technology to prevent rusting..
  • 【Efficient Work】-The upgraded version of the auger drill bit set has the ability to penetrate the soil even if there are small rocks in the soil when planting.This garden auger spiral drill bit is suitable for fast digging in sandy/wet/dry soils.Using the power of a handheld bulb auger，hundreds of holes up to 8, 11 or 14 inches deep and 1.6, 2 or 2.8 inches in diameter can be made in minutes.Dramatically increase digging efficiency without blisters and sore hands..
  • 【Multiple Sizes】-Our garden spiral hole drill planter are available in three sizes, 1.6 "x9", 2 "x15" and 3 "x12". Each size is suitable for different scenarios requiring. 1.6 "x9" garden auger is suitable for planting bulbs, flowers or vegetable seedlings.2 "x15" for beach umbrella post holes and fence holes. 3"x12" for growing plants with larger roots, such as potatoes and cabbages..
  • 【Widly Use】-This auger for planting is the perfect choice for gardeners. Plant bulbs, vegetables, flowers, bare root trees and shrubs, tilling soil or planters, mixing seeds, soil, fertilizer, paint, or batches of mortar mix. You can effortlessly dig post holes o....
Check Stock

Weiler 21115 Power Tube Brush, Double Stem/Double Spiral, 1\

  • Ideal for aggressive cleaning and deburring on on steel, armored steel, cast iron, ductile iron and tool steel parts.
  • Features four stem wires and a double spiral of straight wire fill material.
  • 1/4" stem diameter for use on CNC/milling/automatic machine, drill, drill press, corded/cordless hand drill or cordless screwdriver.
  • Specifications: 1" Power Tube Brush, .0104" Steel Wire Fill, 2-1/2" Brush Length.
  • Country of Origin: United States of America.
Check Stock

Bryson Merch Artwork Trap Souls Tiller 3 T-Shirt, Tank Top

  • ...nting is made from heavy duty manganese steel with a smooth black paint finish to prevent rusting, making them more durable and resistant to breakage than other ordinary steel on the market. The universal hexagonal shaft size can be perfectly matched with any 3/8" or larger chuck drill..
  • 【PERFECT SIZE】Our garden spiral drill bit includes one sizes of bits - 3.5-inch (9cm) diameter x 12-inch (30.5cm) length,.
  • 100% steel solid shaft. fits most electric or cordless drills. Use the power of a handheld drill to quickly dig holes 3-4 inches wide..
  • 【SAVE TIME AND ENERGY】The earth auger drill bit is very easy to use, just put it in your drill, drill a hole anywhere from an inch to several inches deep in just a couple seconds without having to push down. This makes you fit at work without bending over, reducing pain. No more blisters or sore hands..
  • 【WIDE APPLICATION】Garden Auger Spiral Drill Bit is very suitable for planting bulbs, potted plants, vegetables, flowers, and naked Root trees and shrubs, plowing soil or planting boxes. Also, you can bring Auger Drill Bit on vacation to drill a hole in sand to anchor your beach umbrella or make a ice hole to fishing..
  • 【PACKAGE LIST & GUARANTEE】1 pack Auger Spiral Drill Bit. If you have any qu....
Check Stock

Auger Drill Bits for Planting - Garden Spiral Bit set bedding plants, bulbs, digging umbrella and Ice holes Save your back time with our post digger 3×12” + 1.5×9” by Jardilex, 3”×12” and 1.5”×9”

  • ...t the auger bit into the chuck of a drill, make sure the device is set on a low speed, and make a neat hole in the soil within seconds. The set includes 10 waterproof plant labels (2.7” × 2”) made of yellow plastic and a permanent marker: keep track of what you plant!.
  • MANY POSSIBLE APPLICATIONS! A garden auger spiral drill bit is primarily to make holes in the soil for bulbs, potted plants, seedlings, flowers, and even bareroot trees and shrubs, but it’s not the only thing a post hole digger is good for. It can mix soils, fertilizers, paint, or building materials. Drill holes for fence posts, in the ice for ice fishing, in the sand on a beach for your portable parasol. It’s more than a garden auger spiral drill bit for planting!.
  • EFFECTIVE AND PROFESSIONAL ! Instead of buying a whole professional garden bulb planter (those can be rather pricey), get these garden spiral hole drill bits that fits any 3/8″ or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes, and improve your planting job !.
  • PREMIUM MATERIALS FOR DURABILITY AND BETTER DRILLING! The auger drill bits for planting are made of hardened SPHC steel and are powder-coated against corrosion. These bulb planter will work even on harder ....
Check Stock

Twinkle Star 2 Pack Garden Auger Spiral Drill Bit Set, 1.6 x 9 Inch & 3 x 12 Inch with Garden Genie Gloves, Plant Bulb Auger Fits for 3/8 Inch Dill for Bedding Plants and Digging Weeds Roots

  • Widely Application– Ideal usage of these tools for planting bulbs, vegetables, potted plants, flowers, tilling soil and digging through softer aggregates such as clay and soil. Even take it on vacation and drill a hole in the beach to fix your beach umbrella..
  • 2 Pack Garden Spiral Hole Drill– Our planting auger drill bit set are designed to allow you to easily dig holes for loose, rocky material. Made of high-strength steel with weather-resistant black painted finish, not easily deformed, very durable and sturdy. It needs to use with drill which not included. Measuring 3 Inch (dia) x 12 Inch(h), 1.6 Inch (dia) x 9 Inch(h)..
  • Garden Genie Gloves– One hand-claw gloves (4 claws)+one latex gloves without claws. These gloves make digging, planting, grading and raking very fast and easy. Perfect use with our garden spiral hole drill..
  • Easy to Use– They fit most common electric or cordless drill with a shaft size of 3/8 inch or larger with ease. We suggest using an 18V or larger drill with an adjustable drill chuck..
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock