Top Spiral Point Taps For Stainless Steel

uxcell 5/16\-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance

  • Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

uxcell M4 x 0.7 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs

  • Tap Size: M4 x 0.7 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

  • ★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
  • ★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
  • ★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
  • ★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
  • ★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

  • There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • Taps are designed with spiral flutes and the chip clearing process would be better.
  • These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
Check Stock

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock