Top Spiral Wound Battery

MOSTPLUS Ignition Wire Set Compatible for Mercedes Benz C-Class E-Class ML SLK 320 350 1121500118

  • 10.2mm Spiral Wound Design, RFI Suppression.
  • Ultra High Strength/High Temp. Silicone Boots and Sleeve.
  • Part Number: 1121500118, 1121500218, 0356912950, 112 150 02 18, 0 356 912 950.
  • Please make sure to check fitment before purchase..
  • Spiral-Wound Copper Conductor has Extremely Low Resistance combined with extremely high EMI suppression.
Check Stock

TunaMax Extractor Tool Hand Wand with Clear Head for Upholstery & Carpet Cleaning, Car Detailing Vacuum Wand for Portable Extractors & Truckmounts | Turn Shop Vac into an Extractor (CUS04)

  • *【Diy a Powerful Extractor】 If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads.
  • More importantly, it can turn your wet/dry vacuum into an extractor.
  • *【Two Adapters for Your Choices】 Large size adapter A fits 1-7/8" spiral-wound hose.
  • Small size adapter B fits 1-1/4" spiral-wound hose.
  • *【 Transparent Head Design】The 3.5" width clear head design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect in real time.
  • *【Stainless Steel Tube】Standard stainless steel 1.5" vacuum tubing is compatible with portable extractor and truck mount and most carpet cleaning system.
  • *【Attention】Please kindly noted the two adapters are with threads inside, could only connect spiral wound hose directly. Please make sure the hose termination could be taken off before order.
Check Stock

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

  • Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Aviditi Kraft Heavy Duty Mailing Tubes with Caps, 3' x 36', Pack of 24, for Shipping, Storing, Mailing, and Protecting Documents, Blueprints and Posters

  • Economical kraft mailing tubes are great for document storage or for mailing.
  • 0.125 inches thick spiral wound fibreboard.
  • Measures 36-inches length by 3-inches width.
Check Stock

Sterling Seal and Supply , Inc. API 601 9000IR12304GR150 Spiral Wound Gasket with 304SS Inner Ring, 12\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock

Sterling Seal & Supply SSS 9000IR1304GR150X6 Spiral Wound Gasket with 304SS Inner Ring, 1\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite (Pack of 6)

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock

Sterling Seal & Supply SSS 9000IR1500304GR150X6 Spiral Wound Gasket with 304SS Inner Ring, 1-1/2\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite (Pack of 6)

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock

Henny Penny Seat Gasket

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Northlight 18ft x 1.25in Blow- PE In-Ground Swimming Pool Vacuum Hose with Swivel Cuff

  • Heavy duty pool vacuum hose features leak-proof swivel cuff to prevent air from entering or exiting the hose, ensuring maximum vacuum suction while staying afloat for easy pool cleaning.
  • Swivel-cuff provides kink-free maneuverability and is made from a proprietary blend of materials for superior tensile strength and crush-resistant pool hose operation.
  • Resistant to damaging sun and pool water for product longevity.
  • spiral wound construction provides hose strength, flexibility, and maximum water flow efficiency.
  • Two-layer construction is spiral wound together in air tight interlocking design and is abrasion and crush resistant.
  • Made in USA and measures 1 1/2-inches x 50-feet.
Check Stock

Energizer 40AA Ultimate Lithium Long Lasting Leakproof Batteries

  • ....5V with light weight（15g/1pc）life-span(10 years) AA batteries, perfect to power your electronic devices, remote controls and other household appliances. Bevigor provide extremely perfect packaging and strong storage time. Prevent accidental drop or short circuit, and provide more secure protection for the battery. 10-year battery storage life for long-term backup energy..
  • 【More safety &Leak-proof】—Three-layer safety and leak-proof design. Explosion-proof valve, anti-short-circuit valve, leak-proof sealing ring. And use of spiral wound battery technology can effectively prevent liquid from battery to leaking or damage the device (based on standard usage). Is the best choice for high-end electronic products..
  • 【Wide adaptable temperature】—Performs perfectly in extreme environments . Cold resistance surpasses alkaline batteries and nickel-metal hydride batteries. Works well from -40F to 140 ° F and is suitable for both outdoor and indoor use..
  • 【Wide application】—Perfect for both high and low drain devices, such as digital cameras, vr controllers, 4WD speed RC car toys, LED flashlight clocks, emergency lantern, LED candle,portable radio, cassette recorder, solar lights, baby toys, mouse, remote controls and so on..
Check Stock

Thomastik Strings for Cello Versum Solo complete set 4/4 medium VES400

  • D: special design made out of lightweight aluminium and plastic-coated wound copper.
  • G: tungsten/chrome wrapping on multi-alloy spiral core.
  • C: tungsten/chrome wrapping on multi-alloy spiral core.
Check Stock

12\x12\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (6 Pack)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock