Top Spline Shaft - BuyWiseBest.com

CTS TAOT Custom 500K SHORT Split Shaft Audio Taper Pots - Set of Four (4X) - 10% Tolerance – 450G

TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT.
Short Split Shaft (3/8" Height X 3/8" Diameter Bushing).
24 Tooth Fine Spline .236" Diameter Shaft.
Audio Taper suitable for both Volume & Tone controls.

Application: Prop fits SUZUKI/Tohatsu/BRP Johnson DF50/60/70/90/100/115/140HP with 15 spline tooth shaft. Please check your engine shaft spline tooth before purchasing. Prop comes with pressed in rubber bush as pictures showing. Please refer to product description area for Detailed Engine Application. Install the new propeller with exist thrust washer, spacer, nut of engine lower unit shaft. Prop comes with new split pin. Please feel free to contact us for installation guideline..
HIGH STRENGTH:The innovation of aerospace casting technology to marine aluminium propellers is now a reality, boasting hybrid casting of strontium, aluminium and titanium that are far stronger and durable than ever before. Performing 280MPA tensile and 220MPA yield strength which much stronger than traditional die-casting and squeeze casting props..
EXTREME ANTI-CORROSION: Props are robotic powder-coated using AkzoNobel patented anti-corrosive coating powder. More important that it is environmentally safe..
EXCELLENT PERFORMANCE: Props are designed based on OEM blade geometry, with appropriate cupping and camber added. Excellent bow lift, acceleration and top speed as well reducing slip,increasing bite..
QUALITY GURANTEE: Don't be limited by policy. We offer 12 months free repl....

✅【Fit Models】EZGO brake hub fit 1982-up electric golf cart and 1982-1993 2-cycle gas golf cart. Not fit 4 cycle gas EZGO golf cart..
✅【Product Feature】There is a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer..
✅【Replace OEM Part】This EZGO TXT rear brake drum/hub is a replacement for the earlier hub & drum and has the star spline instead of the straight key.Replace OEM# 19186G1, 19186G1P, 17082G2, 17298G1..
✅【Note】 This EZGO TXT drum brake will NOT operate with a keyed axle/hub interface. Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon..
✅【Package Content】1*EZGO rear hub with drum washer, 4* chrome lug nuts. Any problem please feel free to contact us, we are there for YOU !.

【Applicable Models】Golf cart brake drum hub assembly fits perfectly 1982-up EZGO Electric Vehicles, not suitable for gas models. This brake drum/hub assembly replaces Part# 19186G1P.
【Durable Quality】It has a 3/4-Inch center hole with a 24-tooth star spline instead of the straight key. When replacing this brake drum, check the Hub assembly as well..
【Warm Tips】Hub spline and Rear Axle Shaft Spline should be matched tightly. If one of them is wear out, both of them should be replaced at the same time, otherwise the hub spline will strip soon..
【Package Included】2X EZGO TXT drum brake, 8X chrome lug nuts, 4X flat washer and 2X bolt pin, 1X instruction.
【Customer Service】 XUANYUDG0769 is a professional manufacturer for golf cart accessories. We’re committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..

5/8" Diameter Stright Keywed Shaft 1 1/4" Long or S9 9 Tooth Spline Shaft - 2 Bolt A Mount.

Shaft Usage: 6.35mm to 6.35mm / 0.25 to 0.25 inch.
Feature: Spline shaft with coiling clamping.
Flexibility of coupling shaft removes stress between the motor and driving components..
The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..

Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..

Shaft Usage: 5mm to 8mm / 0.19 to 0.31 inch.
Feature: Spline shaft with coiling clamping.
Flexibility of coupling shaft removes stress between the motor and driving components..
The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..

5/8" Diameter Stright Keywed Shaft 1 1/4" Long or S9 9 Tooth Spline Shaft - 2 Bolt A Mount.

IMPORTANT: SHAFT MUST ROTATE COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE..

250K Short Split Audio Taper Pots - 10% Tolerance - suitable for tone or volume control.
1/4" High X 3/8" Diameter Bushing, 24 Tooth Fine Spline Shaft Solid Brass Bushing & Shaft.
Low Friction Rotation & Bakelite base plate.
CTS 450G Series Made Specifically for Use in Guitars.
Imperial Sized - NOT for import guitars using metric components.