Top Split Core Current Transducer

Current Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance

  • 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
  • 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
  • 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
  • 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
  • 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check Stock

Humminbird 411530-1CHO SOLIX 10 Chirp MEGA SI+ G3 CHO (Control Head Only) Fish Finder

  • 10.1" Cross Touch touchscreen display with customizable views and settings that allow you to see multiple technologies at once.
  • Features MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar, Humminbird Basemap, AutoChart Live, Wi-Fi, NMEA 2000, Bluetooth and Ethernet networking.
  • Control Head Only Model: This model does not include a transducer. This CHO model is a great choice for those looking to connect to connect to Built-in MEGA Imaging on Minn Kota trolling motors, accessory transducer options like MEGA 360 Imaging, or share sonar data from an existing Humminbird Ethernet network.
  • Dual Core Processor: Perform any task with speed and ease, thanks to the ultra-responsive interface and upgraded processing power.
  • Airmar Transducer ID: For those looking to install accessory 2D Airmar transducers, SOLIX G3 provides transducer ID to make for fast and simple setup.
Check Stock

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Humminbird 411640-1CHO HELIX 7 CHIRP MDI GPS G4N (Control Head Only) Fish Finder

  • 7" ultra-wide display gives you ample room to view the many pre-loaded split screen view options.
  • Features MEGA Down Imaging, Dual Spectrum CHIRP Sonar, ethernet networking capability, Bluetooth connectivity, AutoChart Live, GPS and Humminbird Basemap built-in.
  • MEGA Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. You'll unlock new details with up to 3X more output than standard Down Imaging sonar.
  • Dual Spectrum CHIRP: Before you cast, know what's down there thanks to long, well-defined fish arches, and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail.
  • Control Head Only unit—Transducer is not included. An accessory transducer of choice can be purchased to suit your install and application needs. This model is also compatible with Minn Kota Built-in MEGA DI trolling motors.
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

MASTECH AC Current 0.1A-400A Clamp Meter Transducer True RMS MS3302

  • Professional AC Current Transducer Clamp Meter.
  • Working voltage: 600V CAT.II per IEC 1010 - 1.
  • With a packed bag, design for easy carrying.
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock