Top Split Rail Fence

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

GRELWT 9 Pack Chain Link Fence Post Extender, 25.2" Fence Extension Height, Fence Extension for Dogs(1-3/8")

  • 25.2" fence extension height, 2.2" bracket, bolts and nuts included. If parts are missing, please contact us and we will provide satisfactory after-sales service.
  • Fit 1-3/8" outer diameter chain link fence top rail..
  • U-Joint Design(Patent Pending):Easy to push on top rail, adjustable to extend fence at any angle..
  • Made from galvanized steel, prevent dogs, coyotes, bobcats, fox, and other uninvited guests from jumping over fence..
  • Widely Application: Zip tie or link wire or fencing material to the posts to have fuller coverage..
Check Stock

Frank A. Edmunds Split Rail Scroll Frame Set,2800

  • Our Split Rail Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need.
  • Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery.
  • The split rail dowels allow easy insertion of your work.
  • The advancing of your pattern "just keeps rolling along".
  • The 4-way side tension bars keep your work area taut. Suggested not to over-tighten the screws, as it will cause them to loosen.
Check Stock

Extend-A-Post - Extensions for Chain Link Fence - Set of 9 (1-3/8")

  • Set of 9 extension posts for chain link fences sized 1 3/8".
  • Extend your existing chain link fence without removal/reinstallation of top rail.
  • Adjustable to Extend fence at any angle from vertical to 90 degrees.
  • These 1 3/8" fence extension posts help prevent pets from climbing / escaping fence.
  • Use to built cat pens / stop dogs from jumping fence key product features.
Check Stock

Woodhaven 3010 Rail Kit

  • Our Rail Kit eliminates you having to make your own wood rails for any of our Planing Sleds, not included..
  • Easy to set up and use. Multiple Rail Kits can be connected together to cover any length part. The Rail Kit is 48” long. Includes two MDF Fence &....
  • Stock length capacity is 12” -16” less (depends on width of stock) than the combined overall length of the Rail Kits..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Rockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs

  • Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
  • Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
  • Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
  • Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
  • What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check Stock

SUNLFPROD Featherboard Adjustable Woodworking Tools Safety Device Stackable Feather board for Table Saws, Router Tables & Band Saw with T-Slots, Miter Slots, T-Track Fences Push Block (Pack of 2)

  • ✔ WIDELY APPLICABLE SIZE- This featherboards compatible with PRS3020 use for most standard 3/4″ Width & 3/8″ Deep (19mm Width & 9mm Deep) miter slot or universal or larger T-track(T- slot), and associated with wedge-lock system and split rail miter bar construction provide maximum hold for bandsaw, table saw and router tables fence..
  • ✔ ACCURACY OF CUTS & SAFETY FIRST – The purpose of featherboard is to prevent fingers from slipping into the saw blade. Feather board can help ensure an accurate cut by securing a workpiece against the fence when you are cutting, giving a nice and clean cut on that edge and reduce wood kickback, which makes it a safer working environment for you. Every woodworker needs a professional featherboard for woodworking. (If any issues, contact us and we will sort it out, any time.).
  • ✔ DURABLE, RELIABLE MATERIALS & ERGONONMIC DESIGN – The featherboards are made of an extremely durable plastic composite body & has an innovative & a simplified design that have special angled fingers & full of toughess apply steady & optimum pressure so this kit possesses additional hardware for adaptive mounting solutions, including miter slot brackets for horizontal mounting, vertical mounting for tracks and plastic spacers for feathe....
Check Stock

GENERAL INTERNATIONAL Automated Tablesaw - 3 HP 1 PH Automatic Bench Saw with 52 Rail Set & Large Wood Table - 850-3-52

  • AUTOMATIC CONTROL SYSTEM - Auto Fence electronic control system is connected to a programmable controller, and the input value includes saw blade....
  • POWDER COATED FINISH - Powder coated, scratch resistant, high quality reinforced steel cabinet.
  • LCD TOUCH DISPLAY - Adjust electronic movement, auto tilt and blade lifting by using the LCD touch control display.
  • EMERGENCY SAFETY STOP - Magnetic emergency stop safety switch to prevent unwanted or unintentional start-up..
  • RAIL SET MOUNTING - Rip fence and guide rail can be mounted on both the left and right side..
Check Stock

9x36' Historic Blank Scroll with wooden spindles

  • Allows you to work with both hands free for better stitch control.
  • Adjustable to different heights and widths.
  • Stand comes complete with an 8.5" x 24" Split Rail scroll frame.
  • 8.5" x 24" Split Rail scroll frame will fit fabric up to 21" wide.
  • Perfect for use in your favorite chair, couch, bed, atop a table, or in the car.
  • Not recommended for thicker fabrics such as burlap..
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

Delta, 36-T30T3, 30 in. DELTA® T3 Fence System & POWERTEC 71007 110 V to 220V Paddle Switch for Power Tools fits Table Saw, Router Table, Drill Press, Bench Saw, Band Saw

  • Product 1: One piece square tubular rail. Max Rip to Left of Blade-13-1/2 inch. Length: Fence 37 inch, Rail 57-1/2 inch.
  • Product 1: Mounting design attaches to Delta table saws including Contractor Saw , Hybrid Saw , and Unisaw models.
  • Product 1: Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0. 4mm).
  • Product 1: Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts.
  • Product 2: Rated current: 2 HP/35 amps at 120V.
  • Product 2: Approved according to UL508 E195428.
  • Product 2: Large paddle for emergency stop.
Check Stock

100 Pcs Fence Wire Clamps for 2-6 Gauge Wire Fencing, Stainless Steel Wire Clips Mount Welded Wire to Vinyl, Wood or Metal Fence

  • Get A Tight Hog Wire Fence: Great for attaching wire fencing to vinyl, wood or metal fence posts, Better to protect your pets, dogs, chickens, livestock or other farm animals.
  • Premium Yard Dog Fences Mounting Clips: All the fence cable clamps are made of 304 stainless steel, Superior rust resistance and excellent of oxidation resistance, Small and strong, No need worry them rusting and breaking. Keep your pets protected with this durable outdoor fence wire mounting clip.
  • Designed For 2-6 Gauge Wire: The clamps are designed as R-type, There are 2 holes for you to install them at posts with screw. They can be used for 2 to 6 Gauge welded wire fence, perfect for most types of rails and fence posts.
  • Easy to Use: It include 100pcs fence rail clamps in this clamp set, Only need to put the wire into the round hole and fix it with a screw on the wall or the fence after tightening.
  • The fence clip every 2 to 3 feet horizontally and every 2 to 3 feet vertically were distributed, your fence will distribute pressure to fastening points evenly, to increase the strength of fence.
  • Wide Application: You can use this fence mounting clamps install welded wire on vinyl, wood, PVC, steel, composite or other types of fence posts.
  • Also can widely used in warehouse, factory, ho....
Check Stock