Top Spool Gun Nozzle

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Zhengmy 12 Pieces Airless Paint Sprayer Gun with Nozzle Guard 5 Spray Tips and 5 Airless Paint Spray Gun Filter for Airless Spraying Machine Paint Accessories (211,313,415,517,623)

  • Package Quantity: the airless paint sprayer gun kit comes in 12 pieces, including an airless sprayer gun, a nozzle tip guard protector, 5 reversible spray tips, and 5 airless spray gun mesh filters, sufficient for your use and replacement in daily life.
  • Good Spraying Effect: the filter installed in the paint sprayer gun could filter the paint and reduce the clogging of the nozzle.
  • The spray range of the nozzle varies according to the size of the aperture, which can be set according to your project needs to create a clear and fine spraying effect.
  • Available for Long Term Use: airless paint sprayer gun is made of quality steel and hard metal materials, 1/4 inch adapter, reversible airless nozzle made of 304 stainless steel handle and tungsten carbide nozzle.
  • Nozzle tip guard is made of metal and plastic, sturdy and durable.
  • Easy to Install: first insert the tip seal into the nozzle, then put the nozzle into the protective base, and finally rotate and secure.
  • Once assembled, the airless paint sprayer can be rotated and installed, ready for your spraying project.
Check Stock

Garden Hose Nozzle, Heavy Duty Metal Spray Gun, Brass Nozzle, Rotaing Water Adjustmen Nozzle- High Pressure Sprayer for Watering,Plants,Car Wash and Pets Shower

  • ➤【HOSE NOZZLE GUN BODY CRAFT】: The surface of the gun bodied are added with a sanding process based on the normal electroplating process, which avoids the scratches on the surface of the garden hose nozzle to a large extent and makes your garden hose nozzle look more marvellous .What’s more, we would give you a foam pot which can be used to match the garden hose nozzle for more use..
  • ➤【ADVANCED MATERIAL】：Made of 100% metal construction built and brass head, durable and powerful. Full soil brass nozzle & zinc alloy gun body. Gun is much stronger than plastic ones and built to last. Garden hose nozzle with 3/4 quick connector and foam pot, perfect for Watering Your Garden, Lawn, Grass, and Flower Beds. It’s also great for Washing Your Car, Dogs, and Pets..
  • ➤【9 FUNCTIONS SPRAY NOZZLE 】: Garden hose nozzle is extra heavy duty made from a 100% metal body and trigger. This spay gun also has a high quality anodized finish to prevent rust, corrosion, and wear. A shock resistant rubberized bezel dial protects the sprayer from accidental drops. The sprayer boasts non-slip and comfortable grip and rotating bezel for choosing 9 spray patterns: Full, Flat, Shower, Cone, Jet, Soaker, Angle, Mist and Center..
Check Stock

Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet

  • Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
  • Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
  • Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
  • Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
  • Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

Zhengmy 5 Pcs Spray Tips Reversible Airless Paint Sprayer Nozzle and Gun Filter Replace for Machine (209,311,415,515,623)

  • Considerate Combination: you will get 5 pieces of black airless sprayer tips and 5 pieces of airless spray gun filters.
  • Each tip is equipped with an airless spray nozzle and a nozzle seal.
  • The universal design makes them suitable for most airless spraying machine products on the market.
  • Nice Compatibility: these paint sprayer tips are compatible with most airless paint sprayers, and 209, 311, 415, 515, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.015 inches, 0.023 inches, and the spray range is 4 to 14 inches.
  • Quality to Use: reversible airless spray tip is composed of quality metal and plastic, and its tip seal is made of stainless steel tip gasket and nylon, the total length of the filter screen is about 3.94 inches/ 10 cm, the mesh is uniform, and it is resistant to compression, simple to clean, and can be cleaned by rotating the nozzle, which are designed for replacing airless spray gun filter elements, spray gun accessories.
  • Easy Installation: no tools are required to install our reversible airless paint sprayer nozzle tip, and airless spray nozzle can be easily installed on the spray gun in a few simple steps.
  • First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the....
Check Stock

Paint Sprayer, Airless Paint Sprayer, High Power HVLP Spray Gun with 3 Nozzles Needle Cap Spray Gun, Spray Paint Gun for Furniture, Fence, Car, Boats, Bicycle, Garden Chairs, 600ML Paint Capacity

  • 【High Capacity HVLP Spray Gun Kit】This is a HVLP paint spray gun with 600ml capacity great for furniture surface, car primer, painting,wall painting, art craft, automotive paint, base coatings, meet most of your scenarios..
  • 【3 Nozzle and 3 Needle】In order to achieve the effect of spraying, we will give three additional replaceable 1.4mm 1.7mm 2.0mm nozzle needle caps in this hvlp spray gun set, you can change different nozzle sizes in different painting projects with different needs, which can fully meet your needs, which will make your work more efficient..
  • 【Adjust the Flow Rate】 High atomization gas pipeline design, come with three adjustable valve knobs for precise coating applications,which have good atomization effects and fast decorative effects. It sprays most types of finishes on evenly and without brush marks, suitable for edges, corners and broad interior surfaces of various work and DIY projects..
  • 【Premium Quality】 Materials of the needle and nozzle of the HVP spray gun are made of high-quality stainless steel, which is sturdy and durable, can be used for a long time, wear-resistant and scratch-resistant.Professional gravity Feed HVLP Spray Gun with 3 fluid Tips 1.4mm, 1.7mm, 2.0mm. Allowing you to paint for a nice wide spectr....
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

ABN Sandblaster Gun Kit – 7 Piece Pressure Washer Sandblasting Kit – Handheld Portable Sandblaster Kit

  • HEAVY DUTY SANDBLAST GUN: The ABN Sandblasting Gun Portable Abrasive Blaster Kit is a handheld sandblaster gun with a sandblaster hose and 3 sandblast nozzle pieces to allow you to spray various abrasives.
  • Easily prepare and clean stubborn materials from any type of irregular surface.
  • VARIETY OF APPLICATIONS: Designed to blow dust, water, and cleaning abrasives to remove rust, paint, scale, and other stubborn materials from various surfaces.
  • Clean off your machinery and engine compartments or clear your driveway and barn doors of debris with one of these sand blasting guns.
  • BUILT TO LAST: Built for durability, strength, and longevity, this portable sand blaster gun kit is made of premium materials that prevent rust and corrosion.
  • The chrome plated gun is durable and is compatible with the copper nozzle fittings and pick-up tube.
  • A small 1/4-inch NPT inlet connects to the heavy-duty rubber hose.
  • Perfect tool kit for cleaning automotive parts.
  • SPECIFICATIONS: The 5.5-inch (14 cm) sand blasting gun features a quick action 1.5-inch (3.8 cm) trigger and a comfortable 4-inch (10.2 cm) handle.
  • Operating air pressure reaches 60 to 120 PSI.
  • Copper tube is 11.5 inches (29.2 cm) and each sand blast nozzle measures at roughly 1.5 inches.
Check Stock

Lincoln TIG Kit for Power MIG 210MP K3690-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

eSUN PLAPlus Filament, Black, 1 kg

  • 1Kg net (Approximately 2.2 lbs) filament with clear Spool.
  • eSUN PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. Several times stronger than PLA.
  • Recommended extrusion/nozzle temperature 210C - 225C, about 20 celsius higher than regular PLA.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool hub hole Diameter: 2.05" - inner circle Diameter: 3.5".
Check Stock