Top Sprial Bevel Gears

2Pcs Set Bevel Gear 1.5 Mod 1:2 (15T/30T) 90 ° Pairing Heavy Duty Motor Metal Gear

  • Bevel Gear 1.5 Mod 1:2 (15T/30T) 2Pcs Set.
  • Notice: these bevel gears have no set screw holes, you need to reprocess it by your own if you need..
  • Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.
Check Stock

Makita GA7031Y 7\ Angle Grinder, with AC/DC Switch

  • Powerful 15.0 AMP motor delivers 8,500 RPM for faster material removal.
  • Spiral bevel gears for smoother rotations and a more efficient transfer of energy.
  • Labyrinth construction averts debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from Filth and debris for longer motor life.
  • Wire mesh intake covers are engineered to avert debris from entering motor especially when used in close proximity to other grinders.
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

OSOYOO Omnidirectional Mecanum Wheels Robotic Car Kit for Arduino Coding Students Based on Mega2560 Introduction

  • 【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
  • 【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
  • 【Good quality and durable】High wear resistance, high strength and high rigidity.
  • 【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
  • 【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

2PC Steel 2 Mould 20T 14mm Hole Dia Bevel Gear for Mechanical Accessory

  • Bevel gears are a must-have accessory in your industrial supplies. Different gears and the number of turns have different load-bearing effects. Please check your needs carefully before purchasing..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Made of 45# steel with high wear-resistance, strong and durable.this product is tough and wear-resistant for long hours of operation, making it an excellent industrial replacement accessory..
Check Stock

UJIKHSD High Speed 4WD 1/10 RC Rally Racing and Drift Car for Adults and Kids, 80KM/H On Road Remote Control Car RC Truck 2.4Ghz RTR Vehicle RC Crawler

  • The design of the steering cup header is a good design that greatly reduces the collision failure rate. When the vehicle collides with excessive force, the header and the steering cup will loosen and disengage without damaging the steering cup or the lower swing arm..
  • The gears use 0.8M mold (32DP) to withstand large torque, and the driving gears, planetary gears, and large bevel reduction gears are all made of high-strength steel, which is stable and durable..
  • The motor compartment and the vertical transmission shaft have transparent dust-proof covers, which not only prevent dust and sound insulation, but also prevent sand and gravel from entering the gears and causing damage to the gears. It is suitable for beach cars..
  • The new design adopts a box-type frame structure, and a 3mm aluminum alloy chassis is used at the front and rear, which combines rigidity and flexibility. Taking into account high strength and light weight..
  • Excellent performance in off-road, mountain roads, beaches, etc., good shock absorption performance, and has a body posture when turning!.
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Hilitand 78pcs Plastic Gears Axle Belt Bushings Pulley Belt Worm Rack Kits Gear Set Shaft Belt DIY Set Toy car Accessories

  • VARIETY OF GEARS, This 78 pcs gear package includes: axles, tires, gears, bushings, rack, etc, so basically buy back can always be used. Enough for you to choose and durable for use..
  • MORE COMPREHENSIVE THINGS , spindle, single, double, crown gear, pulley, rack, bevel gear, copper gear, axle, axles, tires, rubber bands and so on..
  • USED FOR DIY, The gears set is good accessories for your toy car , robot and so on, Easy to change when the gear is missing or damaged, as a spare accessory to use..
  • MADE OF HIGH QUALITY PLASTIC, wearable and long service life. Small parts, easy to use..
  • SATISFACTION GUARANTEE, We care for every customers feeling.If this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked..
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock