Top Spring Loaded Lifting Mechanisms

Jt Eaton 475N Catch/Release Skunk Trap

  • This solid trap is made with metal, PVC and steel and is closed to prevent attracting the attention of people or pets.
  •  Small size prevents skunks from lifting their tails to spray.
  •  Spring-loaded to prevent environmentally caused misfires.
Check Stock

G24-Wwx-Sln Spring Lift Kit,24 Bu,

  • Very fine feathering control allows precise load positioning.
  • Spring-loaded vane motor and pilot air control allow extremely fine feathering ability.
  • Unlimited duty cycle for severe applications.
  • Adjustable lifting and lowering speeds increase production capabilities.
  • Enclosed heavy-duty disc brake provides reliable braking action.
Check Stock

Prepworks by Progressive One Handed Canning Jar Lifter

  • One handed jar lifter for lifting jars in and out of boiling water.
  • Curved handle allows for easy emptying of jars during sterilization.
Check Stock

3002A 1 1/2\ Nickel Matte, Swivel Trigger Snap, Solid Brass-LL

  • Designed for use with rope, chain, straps, animal leashes and other home, farm and recreational applications.
  • Used to connect lifting and rigging attachments.
  • Spring-loaded bolts provide secure closure.
Check Stock

OTC HDJ10P 10 Ton Air / Hydraulic Heavy Duty Service Jack with 3 Position Locking Handle and 6-3/8" to 22" Lifting Range

  • OTC's HDJ10P is a rugged, steel frame, 10-ton capacity service jack with three position (from horizontal to vertical), locking, spring-loaded handle, that brings the versatility of air-assist operation to your shop’s lifting tasks.
  • Ideal size for heavy duty lifting jobs such as vocational vehicles, highway maintenance, delivery and service fleets, bucket trucks, school buses and community transit vehicles.
  • Easy to maneuver, with a foot pedal that quickly positions the saddle to the lift point.
  • Connects to 80-120 PSI shop air supply for effortless lifting of heavy loads.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram and contaminant preventing wiper seals.
  • Roller (front) and ball (rear) bearing wheels provide stability and allow easy maneuvering.
  • Specifications: 6-3/8 to 22 inch lifting range, 106.2 inch reach, 6 inch diameter round saddle, 9.8 inch frame height, 45.4 inch handle length, 4 casters: 5.6 inch fixed front (2), 3.6 inch mid-body swivel (2), weighs 293 lbs..
Check Stock

WFPOWER Yellow Suction Cup Dent Puller Handle Lifter 5inch / Dent Remover/Heavy Duty Glass Lifting Suction Cup with Small Suction Cup

  • ① 5-inch diameter suction cup. Good for auto dent repair, glass and tile lifting. Maximum horizontal capacity is 130 pounds.
  • vertical suction is 110 pounds. Made with a quick-release handle and spring-loaded locking system. Easy to reposition. Sticks to clean, non-porous surfaces. Durable shell. Extra strength rubber seal won't scratch paint.
  • ② With a heavy duty body, this suction cup lifts up to maximum 130 pounds in horizontal.
  • ③ A lifting suction cup is a useful tool for lifting glass surfaces, tiles, and other delicate materials. By creating a vacuum between the cup and the surface, lifting suction cups allow you to lift from the center of a glass panel, and they can be used in pairs for extra control and weight distribution.
  • ④ With a 5-inch suction cup, this lifter is best suited for dent pulling and lifting tile, glass etc..
  • Warm Reminder: 1.Use the suction cup dent puller from the shallow concave line start a little operation, cannot directly operate in the middle, patient little by little operation, will not leave a trace. 2.Use boiling water, heat gun or hair dryer heat up the dent surface to make sure there is good suction condition before lifting. 3.This dent repair puller will not be used if the car is ....
Check Stock

OTC HDJ10 10-Ton Service Jack with 3 Position Locking Handle and 6-3/8 to 22 Lifting Range

  • OTC's HDJ10 is a rugged, steel frame, 10-ton capacity service jack with three position (from horizontal to vertical), locking, spring-loaded handle....
  • Ideal size for heavy duty lifting jobs such as vocational vehicles, highway maintenance, delivery and service fleets, bucket trucks, school buses and....
  • Easy to maneuver, with a foot pedal that quickly positions the saddle to the lift point, enabling you to quickly get vehicle to desired lift height.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram and contaminant preventing wiper seals.
  • Specifications: 6-3/8 to 22 inch lifting range, 51 inch reach, 6 inch diameter round saddle, 9.8 inch frame height, 43.25 inch handle length, 4....
Check Stock

Magpul Rifle Bipod Gun Rest for Hunting and Shooting, M-LOK, Black

  • Made of lightweight Mil-Spec hard anodized 6061 T-6 aluminum and Injection-molded polymer.
  • Aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.
  • Optimized for rapid one-handed adjustments.
  • quickly and quietly transitions between countless user configurations.
  • Easily loaded with stabilizing forward tension without fear of failure or warping.
  • At just over 11 ounces, the Magpul bipod is lighter than many pricier bipods currently on the market.
  • Spring-tension legs stow neatly forward and snap down and lock into place with one hand.
  • Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
  • An industry-exclusive 50 degrees of total tilt and 40 degrees of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Check Stock

Baileigh 40-Inch Sheet Metal Finger Brake (BB-4012F)

  • 40" BOX BRAKE: Bends up to 12-gauge mild steel (16-gauge stainless steel)..
  • FULLY-WELDED HEAVY STEEL FRAMEWORK: Minimizes flex and deformation..
  • HARDENED BENDING DIE: Ensures years of high-quality results..
  • SPRING-LOADED CYLINDER: Assists in lifting the apron, especially helpful when you’re bending at full capacity..
  • FOOT-CONTROLLED CLAMP: Leaves your hands free to position the sheet metal before clamping in place..
  • CREATE DIFFERENT SIZES: Includes 11 hardened fingers of varying widths that you can easily rearrange..
Check Stock

UGEARS 3D Puzzle Mechanical Aquarium - Creative 3D Wooden Puzzles for Adults Driven by a Spring - Aquarium Wood Model Kit - Unique Wooden Puzzle - 3D Puzzles for Adults and Kids Building Kit

  • Underwater adventure: The mechanical aquarium is an ingenious mechanical model building kit of a saltwater fishbowl with two pet tropical fish chasing each other around in a forest of macroalgae fronds that shelter a tiny seahorse.
  • Unique mechanical action: Up to now, UGEARS 3D puzzles for kids and adults have been propelled by rubber band motors. This aquarium engineering kit opens a new chapter: engineering toys driven by a spring-loaded mechanism.
  • Everything is in the box: No extra tools or glue are needed to assemble our wooden puzzle pieces for crafts. Enjoy this challenging yet fascinating kid’s building project and model building kit for adults.
  • Expand your knowledge: Our 3d wooden puzzles for adults showcase the action and interplay of drive gears and driven gears, the function of pendulums, and how spring-action mechanisms work.
  • Exquisite artifact: Choose UGEARS wooden models for adults to build memorable gifts for the fishkeepers in your life. Get your mechanical aquarium kit now.
Check Stock

Canning Jar Lifter Tongs Stainless Steel Jar Lifter with Grip Handle for Safe and Secure Grip (Red,1 Piece)

  • One handed jar lifter for lifting jars in and out of boiling water.
  • Curved handle allows for easy emptying of jars during sterilization.
Check Stock

Baileigh 50-Inch Sheet Metal Finger Brake (BB-5014F)

  • MAKE BOXES AND PANS: Bends 14-gauge mild steel (18-gauge stainless steel) up to 135° across entire 50" length..
  • MAINTAINS ACCURACY: Fully-welded steel framework prevents deformation when bending at full capacity..
  • BLADE GAP ADJUSTMENT: Lets you to take on various gauges of sheet metal..
  • ASSISTED LIFTING: Spring-loaded cylinder helps lift the apron, especially helpful when you’re bending at full capacity..
  • FOOT-CONTROLLED CLAMP: Leaves your hands free to position the sheet metal before clamping in place..
  • CREATE DIFFERENT SIZES: Includes 12 fingers of varying widths that you can easily rearrange..
Check Stock