Top Spring loaded Regulator

PISCISD 74519-88 HARLEY Voltage Regulator Rectifier Fit ForHarley Davidson Softail Springer，Big Twin，CVO Dyna FLT,Heritage,Low Rider,Road Glide 2009-2013, Road King 1994-1996 2009-2014

  • COMPATIBLE MODELS: Voltage Regulator Rectifier for Harley-Davidson CVO 2014, fits for Harley-Davidson Dyna 1991-1999, fits for Harley-Davidson Dyna Glide 1992, fits for Harley-Davidson Electra Glide 1989-1996 2009-2014, fits for Harley-Davidson Fatboy 1990-1999, fits for Harley-Davidson Heritage Softail 1989-1999, fits for Harley-Davidson Heritage Springe 1997-1998, fit for Harley-Davidson Low Rider 1989-1992..
  • OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:74519-88,74519-88A,H1988,Please check OEM number before buying..
  • HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
  • GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..
Check Stock

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

  • Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
  • BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
  • HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
  • HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
Check Stock

6.0 Blue Spring Kit Upgrade,Ford Blue Spring Kit 6.0 Powerstroke Fits 2003 2004 2005 2006 2007 F250, F350, F450, F550- Replaces 3C3Z-9T517-AG Fuel Pressure Regulator Kit

  • Compatibility: The Fuel Regulator Kit fit for 2003 2004 2005 2006 Ford 6.0L Powerstroke F250, F350, F450, F550.
  • Functions of the 6.0 blue spring kit upgrade :increase fuel pressure 10-15psi ,increases fuel injector life of your Ford 6.0 Powerstroke..
  • Easy installation: complete kit with all accessories for installation, few minutes done..
  • Package including: blue spring upgrade+ fuel pressure regulator housing+4*rubber o-ring seals+ 3*orifice seals+4*screws.
Check Stock

BIKICOCO 3/5 Swivel Bolt Snap Hook Lobster Claw Clasp Trigger Spring Loaded Clip D-Ring Ended for Keys Key Chains Tags and Lanyards Black - Pack of 10

  • 3/5'' d-ring eyelet opening swivel snaps, overall length is 3''.
  • Ideal for tying off regulator to protect from dragging or getting damaged.
  • Slide bolt snap supplied with spring-loaded latch for quick and easy attachments.
  • Supplied with swivel to prevent tangling, and ease of motion of attachments.
  • With 360 degrees rotatable performance, it is great for tie-downs, lifting and securing wires, ropes or cables..
  • Pack of 10 zinc alloy black bolt snap hooks, good for quick connect/ disconnect with pet leashes, ropes, small gates and dozens of other uses.
Check Stock

Cressi Sub Start Equipment for Scuba Diving, made in Italy

  • PACKAGE INCLUDES: Cressi Start BC, Cressi AC2 XS2 Regulator-Yoke, Cressi XS Octopus with Hose, Cressi Mini Two Gauge Analog Console, (Imperial).
  • START BCD: Ultra durable construction. 2 large pockets cargo pockets with velcro closure. Rigid padded backpack and carry handle. Three exhaust valves for buoyancy adjustment in any position. 2 technopolymer d-rings. 2 spring-clip holding rings. Octopus holder. Gauge holder..
  • AC2 XS2 REGULATOR: Non-balanced first stage with high performance and reliability.Downstream system. Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design..
  • XS OCTOPUS: The XS second stage features a comfortable mouthpiece and an easy to purge button. Adjustable venturi effect. Easy maintenance. Jacketed Hose extremely light and flexible..
  • MINI 2 GAUGE: Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures to 350 bar or 5000 psi. Mini-depth gauge reads to 70 meters (230 feet). Maximum depth indicator. Luminescent face on the depth gauge.
Check Stock

GasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black

  • Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check Stock

GasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice

  • Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
  • Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.
Check Stock

Yeeco AC 110V 10000W SCR Electronic Voltage Regulator Motor Speed Control Thermostat Governing Governor dimmer

  • AC 10000W SCR regulator with aluminum shell and Intelligent fan.
  • Maximum power: 10000W (connected resistive load), the load cannot exceed the specified maximum power 10000W.
  • NOTE: Must Pay attention to the temperature rise when using in the first time, if it exceeds 80 °C, please enhance heatsink.
  • The power must leave 2/3 margin when connect to inductive load or Capacitive load.
  • If there are any problems with our product, don’t hesitate to contact us, we would do anything for your satisfaction.
Check Stock

5KW 6KW AVR Automatic Voltage Regulator Rectifier for Gasoline Generator W/Carbon Brush Honda GX390

  • Stop fluctuation of voltage, automatically maintaining generator output terminal voltage at a set value.
  • Prevent generator from suffering damages of voltage fluctuation or over load..
  • It uses an electromechanical mechanism, or passive or active electronic components..
  • According to the design, which is used to manage one or more AC or DC voltage..
  • In addition to the shunt regulator, the regulator operates through a number of fixed internal comparison of the actual output voltage of the reference voltage..
Check Stock

SILCA EOLO III CO2 Inflator Head Only | Presta & Schrader Compatible | Bicycle Tire Pump CO2 Adaptor | Easy Push to Inflate | Head for Co2 inflator for Bike Tires

  • Versatile | Looking for a bike pump Presta valve adapter? The Silca CO2 bike tire Inflator is the smallest spool valve CO2 regulator on the market and works with any 16g or 25g threaded cartridge. Co2 inflator Presta and Schrader valves compatible..
  • Easy to Use | Thread the cartridge on, press it onto the valve, pump with co2, and air is in your tire. Simple press-to-pump design. No lever needed! Lightest spring action of any spring-valve regulator. Works perfectly with the Presta valve pump or the Schrader valve pump..
  • Airflow Regulation | Light action spring provides easy control over how much co2 is released. Press this EOLO III Silca pump lightly for lesser air in your tire or put more pressure for faster tire inflation..
  • Great Emergency Kit Tool- The small and lightweight quality of the EOLO make it essential for your bike repair kit or bicycle tire repair kit. Perfect to keep in your saddle bag, pocket or your Silca Premio. You can count on this tiny tool to get you home in a pinch!.
  • Camera-lens' Style Valve Head | Allows for easy installation even in disc wheels.This Silca tool features 3 (Red, White, Green) insulation rings to prevent frozen fingers from co2 inflator cartridge..
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

YICBOR Singer Featherweight Portable Thread Stand for Singer 221 222K Pfaff Elna Bernina Butterfly Old Household Sewing Machines

  • SINGER 221 FEATHERWEIGHT QUILTING FOOT SPRING TYPE 1/4" PART #P60610.
  • Durable, Sturdy, Steel, Hinged, Low-Shank, with 1/4” (6mm) Spring Seam Guide, Sewing Machine Foot. The Spring Seam Guide allows for perfect, precise, exact uniform seams for patchwork quilting, piecing and topstitching. The fabric glides on the black spring guide to provide a consistent 1/4” (6mm) distance from the spring guide to the needle..
  • NOT COMPATIBLE WITH JANOME/ELNA/KENMORE TOP LOADING BOBBIN SEWING MACHINES. THESE TOP LOADING BOBBIN SEWING MACHINES HAVE A DIFFERENT CENTER NEEDLE POSITION..
  • fits Babylock , Brother, Singer, White, Kenmore, Janome, Viking Husqvarna, Elna...LOW SHANK SEWING MACHINES..
  • will fits Babylock Bernette Bernina Brother Elna (Side Loading Bobbin) Euro-Pro Husqvarna Viking Husky Series Janome (Side Loading Bobbin) JUKI Kenmore (Side Loading Bobbin) Necchi New Home Simplicity Singer White.
Check Stock