Top Square Drive Copper Screws
MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit
- Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
- the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
- Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
- Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check StockRichelieu Hardware 42821FBB Onward Full Mortise Ball Bearing Butt Hinge, 3 1/2 in (89 mm), Black, (2 Pack)
- Add the finishing touch to your project with our variety of butt hinges.
- For interior doors | Load Capacity per 3 Hinges: 50 lbs.
- Height: 3 1/2 in (89 mm) | Width: 3 1/2 in (89 mm) | Thickness: 1/8 in (3.1 mm).
- Removable Pin | Flat Tip | 1/4" Radius Corner | Finish: Black, made of Steel.
- Pack of 2 | Included: Mounting hardware is included for an easy installation (flat head Phillips/square drive wood screws and #10 x 1/2" flat head Phillips/square drive machine screws) | This product ships in Onward packaging, Onward is a division of Richelieu Hardware.
Check Stock#12 x 4 Stainless Steel Wood Screw Square Drive Bugle Head Quantity 800 Type 17 Wood Cutting Point 2-3/4 of Thread Length 12 Screw Diameter 4 Screw Length
- HIGH QUALITY STAINLESS STEEL: These #12 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
- GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
- Type 17 Point - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
- Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
- Size Number: #12 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock#14 x 7" Ceramic Coated Torx/Star Drive Gutter Screws - White Exterior Coated Gutter Screws - for Fastening Gutters to Wood - Torx/Star T-30 Drive Head (50 Count Gutter Screws)
- #14 x 7" Ceramic Coated Torx/Star Drive Gutter Screws. These Gutter Screws are WHITE. 50 Count.
- Gutter Screw Torx/Star Drive Provides Twice the Torque over Phillips or Square drive screws..
- Great Gutter Screw for New Construction or Gutter Nail Replacement for a Secure Gutter Attachment.
- Our Gutter Screws have Deep, Wide, Sharp Threads for Excellent Holding Power. Use a T-30 Bit..
- Use to replace old gutter spikes with a strong, water-tight fit, corrosion and rust-resistant.
Check Stock#10 x 2-3/4\ Stainless Steel Wood Screw Square Drive, Bugle Head (Quantity: 1400) Type 17 Wood Cutting Point, 1-7/8\ of Thread Length, 10 Screw Diameter, 2-3/4\ Screw Length
- HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
- GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
- Type 17 Point - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
- Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
- Size Number: #10 / Length of Screw is 2-3/4" inches with 1-7/8" inches of thread.
Check Stock#10 x 3 Stainless Steel Deck Screw Square Drive Flat Head with 4 Nibs Underhead Quantity 100 Type 17 Wood Cutting Point 2 of Thread Length 10 Screw Diameter 3 Screw Length
- HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
- GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
- Type 17 Point - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
- Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
- Size Number: #10 / Length of Screw is 3" inches with 2" inches of thread.
Check StockKreg KDRV-90DG 90° Pocket-Hole Driver
- Premium Home Improvement Tools: This driver bit set lets you drill in hard-to-reach places by turning your drill into a 90° driver.
- Versatile Woodworking Tools: Driver includes a 3 inch square-drive bit.
- High-Quality Carpentry Tools: Magnetic tip locks pocket-hole screws into place for drilling.
- Compatible with Kreg Carpenter Tools: Driver works with the Kreg XL Driver Bit, Easy-Set Pocket-Hole Drill Bit, & Square-Drive Drill Bit.
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock#8 x 1-1/4\ Bronze Star Exterior Coated Modified Truss Head Cabinet Wood Screw Torx/Star Drive Head (Full Box - 4000 APX. Screws) - Multipurpose Exterior Coated Torx/Star Drive Wood Screws
- High Performance Exterior Coated Torx/Star Drive Wood Screws (Full Box (Approx. 4000 screws)).
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance..
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods.
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power.
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads.
Check Stock#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length
- HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
- Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
- Type 17 Point - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
- Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
- Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length
- HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
- Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
- Type 17 Point - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
- Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
- Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock#6 x 3/4 Deep Thread Wood Screws/Square Drive/Flat Head/Type 17 Pt/Steel/Zinc/Type 17 Point/Full Thread / #2 Square Drive Carton 7,000 pcs
- Flat Square Recess (No Nibs) Square Drive for easy installation. Flat Head design for a flush finish.
- Deep Thread Wood Screws With Type-17 Point. Type 17 Point for reduced splitting.
- Case Hardened to Rockwell C45 min. Made of high-quality Steel with Zinc coating for added durability.
- #2 Square Drive for use with a standard driver Carton includes 7,000 pieces for bulk use and savings..
Check Stock#9 x 3 Silver Star Stainless Steel Wood Screw Torx/Star Drive Head 1 Pound - 84 APX Screws - Grade 305 Stainless Steel Torx/Star Drive Wood Screws
- Stainless Steel Wood Screws Provide the Ultimate in Corrosion Resistance. 305 Stainless Steel..
- Stainless Steel Screws are The Screw for the Job for Coastal Applications & Many other Applications..
- Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation..
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power..
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads..
Check Stock