Top Square Drive Lag Bolts

FIX IT Universal Socket Wrench - 48 in 1 Multifunction Socket Wrenches Tool with 360 Degree Rotating Head Spanner Tool for Home and Car Repair

  • UNIVERSAL TOOL: This unique and robust design allows the spanner to self-adjust on any shaped nut whether it’s a hex nut, wing nut, lag bolts,....
  • PROFESSIONAL TOOLS & WIDELY USED - Thick, Heavy Duty, Professional Tool That is Designed To Tackle All Your Projects Around The House, In The Shop, Or....
  • SOCKET WRENCH COMPATIBILITY - Spline Bolts, 6 Point, 12point, Torx, Square Damaged Blots And Any Size Standard Or Metric, 8mm (5/16''), 10mm (3/8"),....
  • PORTABLE: This universal wrench with compact design and lightweight allows you to carry it with you instead of carrying a set of different size....
  • MULTILATERAL: Thick, heavy duty, professional tool that’s designed to tackle all your projects around the house, in the shop, or on the job!.
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

Hammerhead 7.5-Amp 1/2 Inch Impact Wrench – HDIW075

  • 240 ft. lbs Torque - Powerful 7. 5-Amp motor delivers 240 ft. lbs of torque for removing rusted-on or over-tightened lug nuts and bolts.
  • 1/2 Inch Anvil -1/2 inch square drive with friction ring for secure socket retention and easy socket changes.
  • Speed - 2, 200 RPM and 2, 700 IPM quick and efficient to fasten and loosen bolts and nuts.
  • Rocker switch - Forward and reverse rocker switch for intuitive two-finger operation.
  • Metal Gearbox - Superior durability and robust performance.
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

ABN Flexible Socket Extension Cables - 4pc Flex Socket Extension Bar Set 1/4in and 3/8in Drive Light Impact Extender

  • ... FLEXIBLE EXTENSIONS: Drill socket extension bars feature a flexible wound spring-steel shaft that bends up to 90 degrees.
  • Use the flexible extension for drill, wrench, and ratchet use to reach those tight, awkward spaces (varying tools not included).
  • SECURE HOLD: Square flexible socket driver features spring-loaded ball detents on male end and indented sockets to lock into your sockets and tools for a secure hold that prevents slipping while you work.
  • BUILT TO LAST: Drop-forged, heat-treated chrome-vanadium steel provides maximum strength and longevity while the mirror chrome finish resists rust and corrosion.
  • Square drive radius corners reduce wear and increase torque-transfer from flexible ratchet extensions to sockets.
  • PRACTICAL FOR HARD TO REACH FASTENERS: Flexible socket set includes 4 bars: a 12 inch long 3/8 inch drive, 150 G/PC, an 8 inch long 3/8 inch drive, 109 G/PC, a 10 inch long 1/4 inch drive, 90 G/PC, and a 6 inch long 1/4 inch drive, 60 G/PC.
Check Stock

Neiko 02409A 3/4

  • A complete set of high-torque, SAE chrome molybdenum steel sockets with drive for trucks and heavy machinery.
  • Set includes 18 sliding T head breaker bar and two extension bars for loosening tough fasteners by hand.
  • 18, 24 tooth, oval-head ratchet with quick-release drive tang for manual use without impact driver.
  • Six point design grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts.
  • Set comes with 17 Sockets: 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8", 2" and 13/16" Square Socket.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

  • [ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
  • [ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
  • [ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
  • [ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

Valor Fitness CA-2 Adjustable 1” Boxing Speed Bag Platform with Wheel Crank for Easy Adjustment, Speed Bag Included

  • HIGH QUALITY- 2” x 2” frame with 1” 12-gauge Steel tubes hold the platform and frame together for maximum stability. Mounting brackets allow the user to mount the platform onto a wall. Cement anchors and wood lag bolts are provided..
  • FAST RETURN- Made with 1” thick MDF and reinforced with 2 solid steel chrome tubes to allow striking energy to be transferred back into speed bag. 360-degree rotating swivel allows the added speed and efficiency required in the boxing arena..
  • ADJUSTABLE WORM DRIVE AND WHEEL CRANK- Easy to adjust worm drive accommodates all athletes by allowing each user to choose their desired height using wheel crank. Allows for a 13” adjustable range of motion..
  • ADDED STABILITY- 4 locking screw nuts on back of frame prevent shaking. Simply turn the locks to loosen and move platform to desired level with the wheel crank below the unit and retighten. Unit will easily slide on chrome-plated tubes..
  • ADDITIONAL- Includes pump. Valor Fitness Speed Bags are built to fit our products. If using another bag, the CA-2 should accommodate most S/M speed bags. Partially assembled for your convenience..
Check Stock

RIDGID R8223403 12v Lithium-ion Jobmax Ratchet Head (Tool Only; Power Handle, Battery and Charger Not Included)

  • High torque automatic ratchet wrench - no need for big swing actions to tighten nuts and bolts.
  • 3/8 in. square driver ratchet connection, compatible with standard square drive socket adaptors.
  • Over 250 in. lbs. of torque packed into a 12-Volt base.
  • RIDGID: Powerful. Durable. Professional..
  • Battery and multitool Not Included, Power Head Only.
Check Stock