Top Square End Mills

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

SpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check Stock

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

Accusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604

  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

  • Diameter for Bore in Shell End Mill 1/2".
  • Diameter range of standard end mills is 1-1/4 to 1-1/2"..
Check Stock

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock