Top Square Square Bolts

The Hillman Group 3339 7/16-14 Square Nut Zinc Plated, 12-Pack

  • Square nuts are nuts with a square shape that are typically mated with square-headed bolts.
  • Also used as a blind nut in furniture manufacture.
  • Zinc-plated for moderate corrosion resistance.
Check Stock

Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs

  • 1 bag of approximately 100 M3 stainless steel square head bolts (12mm) designed for MakerBeam (10x10mm in diameter)..
  • 1 bag of approximately 25 M3 stainless steel square head bolts (25mm).
  • With hex hole for easy use with hex nut driver.
  • All MakerBeam elements can be combined and reused (no welding required) enabling shorter design and assembly times.
  • MakerBeam enables professional prototyping and provides mechanics for any electronics project.
Check Stock

OEMTOOLS 23906 10 Piece Magnetic Triple Square Bit Socket Set, Triple Square Socket Set for European Vehicles, Includes Sturdy Storage Case

  • If the Socket Fits: Powerful magnets in this triple square bit socket set prevent nuts, bolts, or fasteners from being dropped.
  • Never worry about losing hardware on the job again.
  • Easy to Reach: Triple square sockets measure 2” long for easy access in tight, awkward spaces.
  • Fit the right bit to your socket wrench for hassle-free repairs.
  • Endure the Elements: This drive socket set is made from S2 steel to reduce premature wear.
  • The chrome plated finish and zinc phosphate treatment also prevent rust and corrosion.
  • All in One: Square driver set includes 1/4", 3/8”, and 1/2" drive triple square bits ranging from M4-M18.
  • This 12 point square socket set will have you prepared for many projects.
  • Ready to Go: This 12 point triple square bit set includes a storage case for secure transport.
  • The XZN square bolt socket set features embossed bit sizes for easy identification.
Check Stock

NEIKO 10056A 1/4-Inch 3/8-Inch & 1/2-Inch Drive XZN Triple Square Spline Bit Socket Set | 10 Piece Set | Cr-V Sockets and S2 Steel Bits

  • [VERSATILE]: This fastener bit set features 10 metric bits with the 3 largest sizes being tamperproof. Triple-square spline sockets are ideal for use with tamperproof lug nuts, cylinder head bolts, and other engine bolts..
  • [DESIGN]: This kit can convert standard square drives to triple square bits and is designed to eliminate camout and recess fallaway with elliptically based geometry and vertical sidewalls..
  • [PREMIUM QUALITY]: High-strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance and S2 alloy steel bits reduce wear-outs and ensure longevity and the tamperproof bits are made of CrV for extra strength..
  • [PRECISION]: Precisely machined bit tips ensure accurate size with a 0° drive angle that eliminates radial force preventing fastener recesses and gives access to nuts and bolts on European and Japanese cars and trucks..
  • [INCLUDES]: Set includes 1/4" drive (4mm, 5mm, 6mm), 3/8" drive (8mm, 9mm, 10mm, 12mm, tamperproof 14mm) and 1/2" drive (tamperproof 16mm and tamperproof 18mm)..
Check Stock

Glvaner (8 Sets) 5/16-18 x 2-1/2' Stainless Steel Carriage Bolts Screws Round Head Square Neck and Hex Nuts & Flat Washers 304 Stainless Steel 18-8 Full Thread Coverage

  • Package Includes: 8 Pcs Carriage Bolts (5/16-18 x 2-1/2") + 8 Pcs Hex Nuts (5/16"-18)+ 8 Pcs 5/16" ID Flat Washers.
  • Screw length (including the neck): 2-1/2 inch or 63mm.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
  • Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
Check Stock

Dreneco Square Plate Washer, Stainless Steel Heavy Duty Square Washers M3×16×1,50 pcs

  • Material: Durable 304 stainless steel.Compared with normal stainless steel,it's safer, more durable,non-toxic and corrosion resistant.It is of high hardness and not easy to deform.It can be used in outdoor humid environment..
  • Features: Designed to be used in conjunction with carriage bolts for the securing of roof trusses but can also be used in a variety of ways on many different projects.Can be used with all types of bolts and nuts..
  • Usage: Ideal for use with carriage bolts in structural timber fastening applications such as joist work and decking.Large surface area suitable for heavy duty fastening..
  • Wide Application: Square plate washers can be used for many industries and for many different exterior applications.Often used in timber construction, since they develop more friction when tightened against wood. They are also suitable for a variety of applications where a heavy washer is required..
Check Stock

Lag Screws Rustic Square Head Bolt Combine with Washers and Wing Nut | 5/16” x 2” 7.93 x 50mm | Black Oxide | Set with 8 Bolts 16 Washers and 8 Wing Nuts | Flattened Square-Head 1/2” 12.7mm

  • BOLTS & NUTS SET - Each pack contains 8 square head bolts, 16 washers, and 8 wing nuts..
  • DIMENSIONS - Bolts: 5/16” (7.93mm) by 2” (50mm) 1/2 “ (12.7mm) square head. Washer dimension matching with bolt. Wing nut dimension matching with bolt..
Check Stock

Hardware Essentials 320898 Square U-Bolt-3/8X3Lx4W, Zinc

  • Square U-bolts are great for attachment to square shaped posts.
  • U bolt measurements are as follows – diameter (3’8”), thread count (16), inside length (3”), inside width (4”).
Check Stock

RIDGID 12 Volt JobMax Ratchet Head

  • High torque automatic ratchet wrench - no need for big swing actions to tighten nuts and bolts.
  • 3/8 in. square driver ratchet connection, compatible with standard square drive socket adaptors.
  • Power Handle, Battery and Charger Not Included.
Check Stock

Drill Hog USA 6 Pc Square Easy Out Set Straight Screw Extractor

  • Drill Hog USA 6 Pc Square Easy Out Set Screw Extractors.
  • Includes Square Extractors #1, #2, #3, #4, #5, #6.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock