Top Square Steel Pipe

Toledo Pipe H6S 4\-6\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

  • Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job..
  • With only 4" of clearance required around pipe makes using this cutter anywhere possible..
  • Guide fingers ensure perfect wheel alignment for square cuts..
  • A closed 360° frame forces all energy into cutting the pipe for maximum efficiency..
  • All replacement wheels and parts available in stock..
Check Stock

Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End

  • The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
  • Size of square end of product: 0.55 x 0.55 inch..
  • 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
  • The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
  • The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..
Check Stock

Drill America - DWT64119 1/2\-14 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series

  • Nominal size is that of the pipe fitting being tapped.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required.
Check Stock

NDS 5

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 13 GPM flow rate. 4.3 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 5 in. Square Drain Grates are available in a variety of colors and materials.
  • Comes with one 5 in. Square Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
Check Stock

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

SHARS 3/4\ X 5/8''-11 Pivot Hold Down CLAMP 202-4811 P]

  • Cycling right-angle bracket U-shaped pipe clamp.
Check Stock

DBM IMPORTS Manual Pipe Tube Roller Bender Rolling Tubing Round Flat Square Bending Steel Hand Operate

  • Round Pipe Capacity: Max. 1.18" x 0.04" (30 x 1mm).
  • Flat Steel Capacity: Max. 1.5" x 0.40" (40 x 10mm).
  • Square Steel Capacity: Max. 1.57" x 1.57" x 0.04" (40 x 40 x 1mm).
  • Unit Dim L x W x H (in): 21 x 15 x 16-1/2 *Estimated*.
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

Hydanle 4 Pack 3 Inch Square Plastic Plugs 75mm×75mm Insert End Caps for Square Tubing Post

  • ✅These tubing post end caps Fits 3" OUTSIDE hole diameters square tubing (3"x3") with INSIDE hole diameters from 2.795”-2.87” and wall thickness of .039" - .079" Steel Pipe, package quantity 4.
  • ✅Flexible ridges or straps snugly hold these square plastic tubing plugs in place.
  • ✅The square plugs are made of black LD polyethylene, these high-grade plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on bench feet, bar stool foot sliders, patio furniture, table legs, chairs legs, metal bed legs, couch legs and much more.
  • ✅ The caps for square tubing also give a finished sleek look for many small projects: Suitable for trailer frame ends, bike rack fittings, wrought iron steel, fence post toppers, luggage racks end inserts, step ladder caps, gate rail post covers, Fitness Equipment ends,steel kayak rack end caps, ends of the hitch tube and any square tubing end caps.
  • ✅ Easy to install (3"x3") plugs are also designed to hold up against impact abuse, and harsh weather conditions.
Check Stock

AMZCNC Pipe Tube Bender 3/8″ to 1″, Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • Installed on a solid workbench, the operation is simple and labor-saving. Equipped with 7 sets of 180° elbow dies The pipe bending effect is good, and the pipe is not easy to deform. Wide range of applications: various grades of U-bends, reverse bends, goosenecks and connecting bends The mold is made of ductile iron, with stable performance and durability..
  • Durable Material: The pipe bender is made of 40CR steel and 45# steel with rigorous craftsmanship. This product is in possess of great comprehensive performance, strength, and corrosion resistance . Great Capacity: The long handle bends pipe with its wall thickness stock up to 2.0mm.
  • Its Pipe Diameter Range :3/8“-1“（10mm-25）..
  • 7 Round Dies Size: 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field. 3/8“，1/2”，9/16“，5/8”，3/4“，7/8”，1“. Wall Thickness of Pipe :0.03”-0.078”..
  • Ergonomic Handle: The long handle with rubber covered allows better leverage and operation, the extendable lever will increase the pressure you apply to the metal..
  • Compact & Portable: Compact design allows versatility, can make a variety of bends on square or solid round stock, light weight enough..
Check Stock

(4) Stainless Steel Square U-Bolts Boat Trailer U Bolt Ubolt 1/2\ D x 3 1/16\ Inside Width x 5 5/16\ Inside Length

  • Overall Size: 100 x 64.2mm / 3.94 x 2.53"(L*W).
  • Perfectly Suitable for Square Tube Size: 50 x 50mm / 1.97"..
  • ∪Product Features: Strong and durable, rust resistance, moisture resistance, and corrosion resistance. The surface without burr and thread good grip, u clamp still perform well in rainy and humid seaside environment..
  • ∪Application: Square U-Bolt Used on fix or connect the locked parts to rectangular wood and metal objects, such as cars, RVs, sailboat trailers, pipe, tube, plumbing and other Industrial Applications..
  • ∪Steps for Usage: 1. Choose the corresponding square U shaped bolt according to the size of the pipe. 2. Drill Holes in the Connection. 3. Lock Nut and Flat Washer..
  • ∪Package Content: 4 x U bolts, 4 x plates, 8 x nuts, 8 x flat washers..
Check Stock

Amazon Basics Multi-function Ratchet Wrench,17mm

  • 17mm multi-function ratchet wrench for using on round and square pipe, hexagonal nuts, and more.
  • Works as a socket combination wrench, pipe monkey spanner, and sae crescent nut gear wrench.
  • Drop-forged steel alloy construction with polished, corrosion-resistant finish.
  • Double-sided pull teeth are heat-treated for hardness and excellent grip quality.
  • Dimensions: 9.17 x 1.5 x 0.39 inches (LxWxH).
Check Stock