Top Square Tube Boring Bar

Uenhoy 30 Pcs 1-1/2 Square Plastic Plugs Insert End Caps Black Tubing End Caps for Square Tube Chair Legs Fence

• Product Dimension -- The square plastic plugs fit 1-1/2 inch OD (outside dimension) square tubing with inside hole diameter from 1.23" (31.3mm) to 1.47" (37.3mm). Not fit for 1-1/2 inch inside diameter tubing..
• Premium Quality -- The black plastic plugs are made of PE (polyethylene) material, waterproof, wear resistant, heavy duty and UV-weather resistant. With a series of ribs, the plastic end caps can be held in place..
• Function -- The tube end caps not only can reduce noise, but also prevent scratching on the floor when you move the furniture. Also can dress up the end of the square tube from hurting and prevent rust out from the rain..
• Widely Application -- The ribbed plugs can be used as glide protections on chair legs, bench feet, table legs, bar stool, pool fence. The square end caps also fit as luggage racks end inserts, fitness equipment end inserts and other square tubing end caps..
• Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

• ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
• ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
• ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
• ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

• ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
• ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
• ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
• ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.

26 Feet Tree Pole Pruner Manual Branches Trimmer Tree Branch Garden Tools Loppers Hand Pole Saws Extendable Height Adustable System for Sawing and Shearing

• 8-INCH BAR AND CHAIN: Bar and chain can cut logs up to 4” in diameter. Perfect for trimming high branches that were out of reach without the pole saw attachment..
• EXPANSIVE HEIGHT AND REACH: Depending on operator height, adjustable extension allows for 2 height options up to 11 feet. Find the height that works best for you..
• AUTOMATIC OILER: The bar and chain's best friend as it provides consistent lubrication to the bar and chain allowing them to work most efficiently and effectively..
• COMPATIBILTY: Fits Attachment capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, Kobalt and most other major brands. Powerhead coupler accepts 1 inch diameter tube Drive shaft connector: Square shape . 205” Female Attachment drive shaft: Square shape . 200” across flats. Check description below for all compatible models..

2\ Boring Head SET 9 Pcs Carbide Boring Bars with R8 Shank 1/2'' Mill

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

Milton S986 Service Gauge - Straight Foot Dual Head Chuck

• Milton precision engineered service gages provide accurate, long life trouble free performance.
• Plated brass tube and 4 sided nylon indicator bar.
• Service Gage Straight foot dual head chuck 13 1/4" length 10 PSI to 160 PSI, 2 lb. increments 80 to 1100 kPa in 20 kPa increments.
• 10 pounds per square inch to 160 pounds per square inch in 2 lb. increments or 80 to 1100 kilopascal in 20 kilopascal increments.

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

• For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
• Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
• Equipped with a split bushing to accommodate a boring bar of smaller diameter.
• Precision ground and hardened. Completely sealed for maintenance free operation.

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

• ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
• ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
• ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
• ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
• ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..

Boring Head Set, Carbide Boring Bar MT2 -M10 F1-12 50mm Boring Head with 9pcs 12mm Boring Bars Milling Machine Accessories for Boring and CNC Milling Machine Tools

• SUITABLE FOR : The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
• USED FOR : This tool set is made of high quality material, good wear resistance, and durable in use.It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
• PACKAGE LIST : This tool set contains 1 x drawbar thread: MT2 M10*1.5 1-1/2"-18UNF,1 x F1-12 50mm boring head with 12mm hole accept ,9 x boring carbide tips with 12mm shank,3 x keys ,1 x plastic case.
• QUALITY ASSURANCE :100% brand new and the quality of our products is guaranteed.We supply fast and convenient return or replace service to insure purchasing without worries. If you have any questions about our products,please feel free to contact.

JRT 5pcs 16ER AG60 External Threading Inserts + 16IR Internal CNC Lathe Indexable Carbide Insert Blade for Tool, Gold, length: 16mm ,pitch :0.5-3.0mm

• ☞ Inserts Size: 16ER- 3/8" right hand . Partial profile: 60 degree, Pitch : 0.5--3.0mm, insert length:16mm. Suitable for machining Stainless steel and Steel parts.
• ☞ Inserts Feature: carbide with PVD coating , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
• ☞ Boring Bar Size: Internal left hand holder, 5.9"/150mm long , 0.51"/ 13mm high, Screw size : M3.5 x 10, T15 wrench.
• ☞ Boring Bar Feature : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
• ☞ Package Includes: 1× SNL0013M16 Boring bar + 10pcs 16ER AG60 Carbide inserts + Wrench T15.

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

• Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.