Top Square Tubing Roller Dies
Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″
- Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
- Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
- Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
- Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
- By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
- Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check StockAccuQuilt Go! Me Fabric Cutter Starter Set, 5 Patterns with Instructions, 6 x 6 Inch Cutting Mat, and 2 Dies
- ..., flannel, fleece, denim, leather, batting, felt, silk and satin, 6" cutting width: Compatible with more than 200 GO! and Qube dies in these sizes: 5" x 10", 6" x 12", 6" x 6", 6" x 24".
- INCLUDES - GO! Me Fabric Cutter, GO! Half Square Triangle-3" Finished Square, GO! Quarter Square Triangle-3" Finished Square, GO! Cutting Mat-6" x 6", Pattern & Idea Booklet with 5 patterns, User’s Manual & Product Registration Card.
Check StockABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube
- ..., 5/16-inch (8mm), and 3/8-inch tubing.
- [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
- 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
- [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
- Each die block is 1.7 inches (4.3 cm) long.
- Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
- [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1 x 3.5 inch (35.8x15.5x8.9 cm) plastic blow-molded carrying case.
Check StockEastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool
- Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
- Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
- 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check StockWostore Eccentric Flaring Tool Kit Tubing Refrigeration 7 Dies 3/16-3/4 inch Copper
- 【Practical Tool】Create 45 degree precise flares in soft copper, brass, aluminum and mild steel tubing.
- 【Available Sizes】For flaring 7 dies size: 3/16,1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 -inch sizes..
- 【Convenient Operation】A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort, easy to operate..
- 【Uniform Flares】Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow.Produces a rolling action for uniform flare walls without galling in tubing..
- 【Securely & Safely Stored】Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability..
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts
- 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
- Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockThreaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4
- 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
- Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
- Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
- Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
- Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check StockHydanle 4 Pack 3 Inch Square Plastic Plugs 75mm×75mm Insert End Caps for Square Tubing Post
- ✅These tubing post end caps Fits 3" OUTSIDE hole diameters square tubing (3"x3") with INSIDE hole diameters from 2.795”-2.87” and wall thickness of .039" - .079" Steel Pipe, package quantity 4.
- ✅Flexible ridges or straps snugly hold these square plastic tubing plugs in place.
- ✅The square plugs are made of black LD polyethylene, these high-grade plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on bench feet, bar stool foot sliders, patio furniture, table legs, chairs legs, metal bed legs, couch legs and much more.
- ✅ The caps for square tubing also give a finished sleek look for many small projects: Suitable for trailer frame ends, bike rack fittings, wrought iron steel, fence post toppers, luggage racks end inserts, step ladder caps, gate rail post covers, Fitness Equipment ends,steel kayak rack end caps, ends of the hitch tube and any square tubing end caps.
- ✅ Easy to install (3"x3") plugs are also designed to hold up against impact abuse, and harsh weather conditions.
Check Stock8 Pack 2 Inch Square Plastic Plugs,Hydanle Insert End Caps for Square Tubing Post
- ✅These heavy duty tubing post end caps Fits 2" OD square tubing (2"x2") with INSIDE hole diameters (ID) from1.85" to 1.9" and wall thickness of .02"....
- ✅Flexible ridges or straps snugly hold these square plastic tubing plugs in place.
- ✅The square plugs are made of black LD polyethylene, these high-grade plastics black ribbed plugs work great for preventing scuffs on wood floor or....
- ✅ The caps for square tubing also give a finished sleek look for many small projects: Suitable for trailer frame ends, bike rack fittings, wrought....
- ✅ Easy to install 2"x2" plugs are also designed to hold up against impact abuse, and harsh weather conditions.
Check Stock