Top Square Welded Nut - BuyWiseBest.com

XtremepowerUS Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier w/ Cr-v Socket (Torque Wrench W/ 8pc Socket Set)

Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened.
Use the square socket for square duel lug studs.
Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
With 1:58 gear ratio bringing 4800 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
6-point sockets include sizes (38mm), (33mm), (32mm), (30mm), (27mm) and (24mm).
This labor saving wrench set fits your other 1-inch drive sockets.
Convenient Storage Case - Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization. Torque amp....

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

Multi-bit screwdriver with innovative driver shaft holds screwdriver tips and converts to nut driver sizes.
Compact design features standard 1-1/4-Inch (32 mm) shaft for access to confined spaces.
Cushion-Grip handle provides greater torque and comfort.
Contains: #1 Square Recess, #2 Square Recess, 3/16-Inch (5 mm) slotted, #2 Phillips, 1/4-Inch (6 mm) and 5/16-Inch (8 mm) nut drivers.
Shaft holds 4 universal tips and converts to 2 nut driver sizes.
Compact design features standard 1-1/4-inch shaft.

4.7mm/0.187inch thickness, thick enough so that the quares Washer will not be deformed, durable and has a long service life..
Square washer is made of high-quality materials, high hardness, anti-corrosion and anti-rust, smooth surface without burrs..
Mostly used in mechanical equipment, it is very good to protect the nut and prevent the nut from loosening..
Widely used in machinery and industrial equipment, square plate washers can protect the nut well, is an ideal buffer hardware..
Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..

Butt Welding Clamps includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.

A free floating square nut retained within a spring steel cage..
The cage has two retaining legs on the same side of the nut, positioned 180° from each other, that hold the nut in place at panel edges or center panel locations..

14 separate tools, designed around some of the most common needs in the rigging industry.
18mm (M10), 20mm (M12), 24mm (M14) nut tools.

【】Square Nut Size: 8 x 11 x 4mm( Width x Length x Thickness).
【】Nut Material: Carbon Steel with Zinc Plated.
【】Package: 6pcs x ( M6 Bolts + M6 Flat Washers + M6 Flat Washers + M6 Square Nuts).
【】Application: fasten Motorcycle Battery Terminal and other household DIY projects..