Top Ssd Protective Case

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

ORICO M.2 Enclosure for NVMe SSD, USB4.0 40Gbps Type-C to M Key B+M Key 2280 Aluminum External SSD Case Compatible with Thunderbolt 3/4 USB3.2/3.1/3.0/ Type-C-M2V01

  • 【Multiple Transmission Protocol 】ORICO M.2 NVMe SSD external case adopts dual-chip master which support USB4.0 and fully compatible with Thunderbolt 3/Thunderbolt 4 USB3.2/3.1/3.0/Type-C (USB2.0 and below not compatible)..
  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The measured maximum continuous read speed can reach 2700MB/s, and the continuous write can reach 1400MB/s.（This data comes from ORICO laboratory. Please note that the speed is different in different environments.）.
  • 【Only for M.2 2280 NVMe SSD】ORICO M.2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 2TB capacity. The applicable SSD size is 2280. (Does not support NGFF SATA M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.).
  • 【Easy to Use】You just loosen the screw of the cover, put your SSD gently into SSD external housing, then fix the cover with a screw and connect cable to start work. Plug and play. No driver needed. Compact and portable. Easy to carry with lanyard hole..
  • 【Universal Compatibility】ORICO M.2 SSD case includes supports Windows/ Mac / Linux system, not only for PC and laptop, but also for smart TV, smart router and PS4 etc. NOTE: To achieve thunderbolt speed, please use thu....
Check Stock

GODSHARK 2.5' Inch IDE to SATA Adapter, Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port

  • Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop.
  • 50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case..
  • This adapter using JM20330 Serial ATA Bridge Chip..
Check Stock

Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B Only Support Key-B 2280 SSD

  • √[Important]Strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Must format the new SSD before use..
  • √Updated X862 V2.0 M.2 NGFF SATA SSD Shield can support up to 2TB m.2 NGFF SSD solid-state drive.
  • √ Only supports Raspberry Pi 4 Model B.
  • √ Supports M.2 NGFF 2280 SSD lengths ONLY.
  • √ UASP supported only, not support TRIM.
  • √ How to power RPi 4&X862: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X862 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X862 V2.0&X735/X708, refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X862 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot).
  • If the SSD is not recoginzed or other issue....
Check Stock

Sinreton 736pcs PC Computer Standoffs Screws Assortment Kit for 2.5\ SSD, Hard Drive, Computer Case, Motherboard, Fan, Power Graphics

  • [10 different size screws]: use for 2.5" SSD, hard drive,computer case, power supply, motherboard, hard drives, fan and floppy,CD-ROM drives.
  • [Style]:hard driver screws(M3.5x5mm),hand twist case screw,Main board fixed screws (M3 x 5),CD-ROM set screws (M3 x 4),fan screws(M5x10),case screws screw (M3.5 x 6),M3 washers,2.5" M3 ssd screws.
  • [Material]: Made of high quality black zinc plated which have superior rust resistance and excellent oxidation resistance.
  • [Application]:Perfect for 2.5" SSD, Hard Drive, computer case, power supply, Mainboard/motherboard, fan and floppy/CD-ROM/DVD-ROM drives.
  • [Total]: 736pcs computer screws with a storage box.great for PC building hobbyist.
Check Stock

PNY SSD 480GB CS900 2.5' Sata III Internal Solid State Drive SSD (SSD7CS900-480-RB) Bundle with (1) Everything But Stromboli SSD/HDD Enclosure USB 3.0

  • This SSD with Enclosure Bundle includes (1) 480GB PNY CS900 SSD and (1) Everything But Stromboli SDD/HDD Enclosure for SATA 2.5”.
  • Make your laptop or desktop computer better! Experience the difference with super-fast application loads and OS boot times - Compatible with PNY SSD Enclosure (included) so you can turn your SSD or HDD into an external hard drive with case.
  • Boosts burst write performance, giving it great speed for typical PC workloads - Shock-resistant for long lasting durability, so dropping your computer won't ruin it all!.
  • Phenomenal performance with up to 535MB/s seq. read and 500MB/s seq. write speeds - Very low power consumption and also backwards compatible with SATA-II 3Gb/s.
  • SSD Enclosure Included – protect your SATA 2.5 Hard Drive or SSD with this enclosure case with USB 3.0 cord.
Check Stock

BobjGear Bobj Rugged Tablet Case for Lenovo 10e Chromebook Tablet Kid Friendly Batfish Blue

  • Hard travel case for SanDisk 250GB / 500GB / 1TB / 2TB Extreme Portable SSD SDSSDE60 (it can not fit the SanDisk Extreme PRO Portable External SSD).....
  • The case is shockproof, dustproof and Semi-waterproof. It can effectively absorb impacts and reduce damages caused by accidentally bumping, and....
  • CONVENIENT DESIGN: Steady hand strap for portability. Classic zipper convenience for easy in Opening and Closing..
  • EASY TO CARRY: This hard case for SanDisk 250GB / 500GB / 1TB / 2TB Extreme Portable SSD SDSSDE60 is lightweight and compact can fit in your backpack,....
  • Risk-free Purchase: We will 100% full refund, if there are quality problems, this is totally risk-free buy. CLICK the Orange button to Order Now!.
Check Stock

PNY SSD 120GB CS900 2.5' Sata III Internal Solid State Drive SSD (SSD7CS900-120-RB) Bundle with (1) Everything But Stromboli SSD/HDD Enclosure USB 3.0

  • This SSD with Enclosure Bundle includes (1) 120GB PNY CS900 SSD and (1) Everything But Stromboli SDD/HDD Enclosure for SATA 2.5”.
  • Make your laptop or desktop computer better! Experience the difference with super-fast application loads and OS boot times - Compatible with PNY SSD Enclosure (included) so you can turn your SSD or HDD into an external hard drive with case.
  • Boosts burst write performance, giving it great speed for typical PC workloads - Shock-resistant for long lasting durability, so dropping your computer won't ruin it all!.
  • Phenomenal performance with up to 535MB/s seq. read and 500MB/s seq. write speeds - Very low power consumption and also backwards compatible with SATA-II 3Gb/s.
  • SSD Enclosure Pack Included – protect your SATA 2.5 Hard Drive or SSD with this enclosure case with USB 3.0 cord.
Check Stock

ORICO M.2 NVMe SATA SSD Enclosure Adapter Tool-Free, USB C 3.2 Gen 2 10Gbps NVME, 5Gbps NGFF SATA PCIe M-Key(B+M Key) 2230/2242/2260/2280, Aluminum External M2 Reader Support UASP Trim- PWDM2-BK

  • 【10Gbps High Speed M.2 NVMe/SATA Enclosure】When using NVMe SSD, the transmission rate is 10Gbps and the read and write speed is 1000MB/s. When using M.2 SATA SSD, the transmission rate is 5Gbps, and the reading and writing speed is 450MB/s..
  • 【Improve Heat Dissipation】This PWDM2 NVMe usb adapter is equipped with a professional Heatsink -cooling vest. With the thermal silicone and aluminum shell, quickly heat dissipation..
  • 【Compatibility】M.2 reader is suitable for M.2 NVMe M Key/B+M Key and M.2 NGFF SATA B+M Key SSD (based on SATA). The maximum capacity of SSD is 4TB. SSD size:2230/2242/2260/2280. Compatible with multiple operating systems: Windows, Mac OS, Linux, Android..
  • 【Toolless Design】M2 adapter allows you to easily install the M.2 SATA SSD and M.2 NMVE SSD without tools. Open and lock the case with one click to prevent SSD from slipping out..
  • 【Compact and Portable】 This ultra-compact NVMe SATA case is both portable and durable, which is very suitable for driving. Internal SSD is firmly using rubber fastener, and it is not easy to pop up at will..
Check Stock

Sintech USB 3.0 External Enclosure Case for 18 Pin SSD from 2010-2011 MacBook Air A1369 A1370 1375 A1377 MC505 MC506

  • Alow 2010-2011 macbook air SSD to work as USB 3.0 external HDD case.
  • Support SSD from MACBOOK AIR 2010-2011 Year.
Check Stock

SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD for SanDisk SSD for SanDisk SSD T5 Compatible with SMALLRIG Cage for BMPCC 4K & 6K for Z Cam E2 & for Sigma fp - BSH2343

  • 【UNIVERSAL HOLDER FOR SSD】Firmly secure your SSD on your camera or camera cage, you can choose SmallRig external SSD Mount BSH2343. This....
  • 【MOUNTS ON CAMERA DIRECTLY】This holder could mount an SSD directly on cameras such as for BMPCC 4K & 6K, for Z Cam E2, and for Sigma fp.
  • 【FLEXIBLE INSTALLATION】This holder comes with a detachable cold shoe which can be fixed on the bottom or side of the holder, so you can mount the....
  • 【USB-C CABLE CLAMP INCLUDED】It comes with a cable clamp to fix the USB-C cable, fastened by a knob screw. This SSD holder is compact and versatile....
  • 【RUBBER CUSHIONS】The external SSD bracket features soft protective rubber pads inside, keeping the SSD securely in the clamp and preventing....
Check Stock

UGREEN 2.5 Inch Hard Drive Enclosure Integrate with 1.6FT Cable, Tool-Free SATA to USB 3.0 7mm 9.5mm External SATA SSD HDD Case with UASP, Laptop Computer Hard Disk Enclosure

  • ... to SSD for additional storage or downloading game. Lightweight & slim size plus undetachable cable make the hard disk enclosure perfect for travel. Note: SSD or HDD is NOT included.
  • Tool-Free Installation: This 2.5" hard drive enclosure is very easy to assemble and disassemble, just drop the drive in, snap the case back together and plug in, the external hard drive enclosure can be immediately recognized by PC, works instantly as a backup unit or additional storage device, truly plug and play..
  • 5Gbps Super Speed: With standard SATA III and USB 3.0 connection, this HDD SSD enclosure can support up to 5Gbps transmission speed. Accelerated by UASP protocol, making the HDD SSD case 70% faster than traditional USB 3.0. UGREEN SATA enclosure can backward compatible with USB 2.0 port..
  • Wide Compatibility: The solid state drive enclosure is suitable for 7mm and 9.5mm 2.5 inch SATA III/ II/ I HDD SSD, compatible with Samsung Seagate WD Toshiba, etc. UGREEN laptop computer hard drive enclosures can be quickly recognized by Windows 11/ 10/ 8.1/ 8/ 7/ Vista/ XP, Mac OS, Linux. Widely applied on PC, laptop, Xbox, PS5/PS4/PS3, Router, etc..
  • Durability and Safety: If your drive is just gonna sit on a desk or travel in a backpack, this durable 2.5 HDD SSD enclosur....
Check Stock