Top St Fiber Optical Adapter

uxcell ST Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

  • Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
  • [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock

Digital Optical Audio Splitter, SPDIF Toslink Optical Fiber Audio Splitter, 1 in 3 Out Toslink Splitter with Optical Cable, Support Dolby Digital & DTS 5.1 for PS3 Blue-Ray DVD HDTV

  • Optical Audio Splitter: This optical splitter provides one way of optical fiber signal input splitter to three sets of SPDIF/TosLink signal..
  • Lossless Sound Quality: Using optical fiber cable for connection will reduce loss by 0.2Db/m, allowing you to enjoy a live audio experience with output distances up to 40m/130ft!.
  • Voltage Protection: Our digital audio splitter incorporates over-voltage protection. If the power adapter you are using does not match the splitter, it will not work normally..
  • Support Audio Format: The toslink optical splitter support Dolby-AC3/DTS/LPCM 2.0, PCM Stereo 32kHz, 44.1kHz, 48kHz and 96kHz,max baud rate up to 16 Mbps..
  • Satisfaction Service: The package includes SPDIF/Toslink optical splitter*1, audio optical cable*1, power adapter*1, User Manual*1. If you have any problem, just contact to us and we will give you a timely solution within 24 hours..
Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

  • aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
  • 6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
  • FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.
Check Stock

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • ...tor will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • GESD Warranty10 years OEM factory competency,Most efficient technical support with superb processing technologyOur committed to provide the best product and services to every customer,please do not hesitate to contact us,We are looking forward to your feedback..
Check Stock

VCELINK Optical Cable Splitter Fiber 1 in 2 Out Toslink Splitter, 24K Gold Plated Connectors for CD Player, DVD Player, Digital TV, Receiver, Sound Bar, Amplifier (Black)

  • ​​​​Multiple components can be connected without switching: The fiber optic cable splitter connects an optical audio source and split it into two receiving devices. It can save the wear of constant plug and unplug of fiber optical cables..
  • Wide Application: optical audio splitter applies to A/V receiver, Blu-ray Player, hearing aids, soundbar, DVD/CD player, headset, Receiver, Amplifier, etc..
  • Usage notes Optical splitters 1 in 2 out support 1 male input to 2 female outputs at the same time.
  • If 2 female inputs to 1 male output, you need to turn off one female inputs device, 2 female inputs can't work at the same time, or will interfere and cause noise..
  • High Quality: The gold-plated plug has good conductivity, stable signal transmission, and durable corrosion resistance. High-quality optical fiber signal transmission is faster and more stable. Optical fiber splitter doesn't require a power supply and supports DTS sound effects, panoramic surround sound, and 5.1/7.1 channels, giving you the ultimate listening experience..
  • Packaging and after-sales: 1x optical splitter adapter. The male head is protected by a plastic dust cap. If you have any problems with the product, please don't worry, we provide an 18-month warranty and 24h customer service for....
Check Stock

Optical Splitter 1 in 2 Out Toslink Splitter Audio Optical Cable Splitter Fiber Converter 24K Gold Plated Connector for Home Theatre Xbox Playstation

  • The 1×2 toslink cable adapter is designed to split a single signal into two. Ideal for connecting a CD player, DVD player or other digital audio....
  • With 24k gold connector, 1mm low loss core, low-jitter synthetic fiber and heavy metal connector, it can suppress vibration, ensure excellent sound....
  • Toslink digital fiber splitter 1 in 2 output audio adapter cable. Easy to use, plug and play, no battery required.
  • Digital toslink optical splitter adapter allows you to connect toslink optical digital audio sources and split them into two different receiving....
  • Note!!!: Audio Splitter 1 in 1 output is not compatible with CD/DVD PS3 X-Box360, PC, SkyBox, Samsung, Sound Bar, Samsung, TV. But it supports 1 input....
Check Stock

Fiber Visual Fault Locator 30mW 30KM, VFL Fiber Optic Cable Tester Meter, Red Light Pen Tester Adapt LC/FC/SC/ST Interface, Fiber Network Cable Test Kit Fiber Light Source Testers(Aluminum)

  • 【Wide Application】Universal 2.5mm connector designed for LC, ST, SC, FC interferes both in the circle and square shape of different fiber optic cables, test for both single-mode and multi-mode cables. Apply To: Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • 【Detection Distance】This visual fault locator has a strong light source output power of 30mW, constant output power the strong red light goes 20-30 kilometers far in fiber optic cable, high effective power circuits provide stable power, continuous-wave and pulsed mode..
  • 【Practical Design】Small size and lightweight, pen-type design with pouch make it portable, easy to check fiber faults with visual fault locator, design with a stainless steel head and aluminum body to prevent crash and dust, the case ground design prevents ESD damage efficiently..
Check Stock

VCE 5-Pack Gold Plated RCA Male to Male RCA Coupler Connector Adapter Bundle with Optical Cable Splitter

  • The product is a bundle of 2 items. Package Included：5x VCE Gold Plated RCA Male to Male RCA Coupler Connector Adapter+1 x Optical Cable Splitter.
  • Easily Join two Female RCA Cables Together, or change the gender of a cable by super simple installation.
  • Multiple components can be connected without switching: Fiber optic splitter connect an optical audio source and split it into two receiving devices. It can save the wear of constant plug and unplug of fiber optical cables.
  • Wide Application: optical audio splitter apply to A/V receiver, Blu-ray Player, Playstation, hearing aids, soundbar, DVD/CD player, headphone, receiver, Amplifier etc.
Check Stock

eSynic 3X2 Optical Switcher Splitter, Optical Audio Splitter 3 in 2 Out Aluminum Alloy 3 Port Optical Switch, 2 Way Digital Audio Splitter with IR Remote/Power Adapter Support PCM2.0 5.1CH DTS AC3

  • 【3 In 2 Out Optical Audio Splitter Switcher】Support 3 Optical Selection Input, 2 Optical Output. 3 Digital Optical Toslink Sources Input Switch to 2 Optical TosLink (SPDIF) Ontput to Your Sound Bar/Optical Bluetooth Transmitter/Amplifier. Compatible with PS3, PS4, Blu-ray Player, Cable Box, HDTV,etc..
  • 【Support 3 Latest Audio Format】Supports all Digital SPDIF Audio Formats Including PCM/LPCM2.0/DTS/Dolby-AC3, Support Signal Retiming. It Does Not Support 7. 1CH Dolby Digital Plus..
  • 【Long Distance Transmit with Power Adapter】Used Optical Fiber Cable Loss Less the 0.2Db/m, Output Distance is Up to 25m(82ft). with Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Comes with a 5V 1A Power Adapter for Stedy Charging..
  • 【Remote Control & Manual Switching】Plug & Play, Input can be Selected via IR Remote Control(Included) or Button on the Switch. Support Last Time Working State Memory when Power Off..
  • 【Aluminum Alloy Material with 6.6ft Toslink Cable】Optical Audio Splitter Make of Aluminum Alloy for Sturdy and Anti-interference, Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter. Comes with a 6.6ft Toslink/Optical Cable, Convenience for Using..
Check Stock

Primeda-tronic 8 Channel Analog Video Over Fiber Optic Converters with RS-485 Data,ST Fiber Connector, Single Mutlimode Fiber up to 0.93Miles (1.5Km), A Pair

  • This video over fiber optic is used to send 8 channels of analog video signals through one optical cable to remote display devices. Optical interface: ST..
  • Suitable fiber type: universal multimode fiber. Long transmission distance up to 1500m(0.93 miles) by a multimode fiber. With RS-485 data (reverse direction) for remote control PTZ..
  • Applicable for Analog cameras, Compatible for PAL, NTSC, SECAM Video format automatically . Note: Not support 1080P/960P/720P TVI/CVI/AHD HD Cameras and SDI camera..
  • LED indicators can dynamic feedback link connection state and fault detection to easily monitor network status..
  • Plug and Play, High Quality and Stable, Cost effective, Greatly save your engineering cabling cost..
Check Stock

Ubiquiti U Fiber Multi-Mode SFP 10G - UF-MM-10G

  • ★This is a multi-purpose toolkit, it can provide the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency. 1mW Visual Fault Locator Fiber Optic Cable Tester Meter..
  • ★FTTH optical fiber cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fiber cutting, cleaning and testing..
  • ★Pocket size and light weight, easy to use. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving..
  • ★It is an ideal tool for construction operators. Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting knife..
  • ★We ship from the United States, and if you are not satisfied with the product, we will provide you with a refund.
Check Stock

Fiber Attenuator Singlemode Simplex LC/UPC Fixed 2dB

  • [MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
  • [MATERIAL]: The core material of the adapter is ceramics..
  • [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
  • [SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
  • [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..
Check Stock