Top Stainless Bearing Housing

Yeah Racing Signal 10 Master Competition 40x40mm Cooling Fan #YA-0534

  • Fan Size: 40*40*12mm, Amp Dram at 8.4v: 0.61.
  • Operating voltage 6.5-8.4v, Plastic Blade and Frame Housing.
  • Dual ball Bearing, Stainless steel shaft core, Wire Length 200mm.
  • Connector Futaba, Fan Speed: 19000 R.P.M (+/-10%).
  • The maximum power input voltage is 8.4v (2 cells Li-Po).
Check Stock

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

PNBO 2 PCS SBR16-2000mm Linear Rail, Linear Guide 2 Linear Guide Rails and 4 Square Type Carriage Bearing Blocks,Linear Rails and Bearings Kit,for DIY CNC Routers Lathes Machine

  • 【SBR16 LINEAR RAIL】- Two 2000mm/78.8" long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

ECO-FLO Products EFSUB15-123 Submersible Deep Water Well Pump, 3 Wire, 230v, 4 Inch, 1 1/2 HP, 14 GPM

  • Stainless steel pump shaft is precision ground for exact bearing fit and straightness.
  • Precision molded impellers and diffusers.
  • Stainless steel pump housing for maximum protection against corrosion.
  • Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information.
  • Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products.
Check Stock

Linear Rail 2PCS SBR16-1500mm Linear Slide Rail 4PCS SBR16UU Bearing Block CNC Kit Linear Rails and Bearings Kit CNC Rails Linear Rail Set forAutomated Machines and Equipments

  • 【SBR16 LINEAR RAIL】- Two 1500 mm (59") long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 21.6 lb (9.8 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

CHUANGNENG 2Set SBR20 1500mm Fully Supported Linear Rail Shaft Rod with 4 SBR20UU Block Bearing,for Automated Machines DIY CNC Routers Lathes Mills

  • 【COMPLETE LINEAR RAIL KITS】- This linear rail set includes 2 pieces of 1500 mm long rail shafts and 4 SBR20UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • 【HIGH-QUALITY STEEL MATERIAL】- CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • 【PREMIER LINEAR GUIDING SYSTEM】- Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • 【EASY TO INSTALL】- Aluminum alloy support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance..
  • 【WIDE APPLICATION】- The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock

Linear Rails and Bearings Linear Rail 2 PCS SBR16-1000mm Linear Slide Rails and 4 PCS SBR16UU Carriage Bearing Blocks Linear Bearings and Rails for DIY CNC Routers Lathes Machine…

  • 【SBR16 LINEAR RAIL】- Two 1000 mm (39.37") long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 12.7 lb (5.8 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

Linear Rails and Bearings Linear Rail 2 PCS SBR20-1800mm Linear Slide Rails and 4 PCS SBR20UU Carriage Bearing Blocks Linear Bearings and Rails for DIY CNC Routers Lathes Machine

  • 【SBR20 LINEAR RAIL】- Two 1800 mm (70.8") long SBR20 rail shafts, and 4 SBR20UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR20UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 24.69 lb (11.2 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

Sealmaster NP-16 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1" Bore, 1-7/16" Base to Center Height, 4-1/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Sealmaster NP-24 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/2" Bore, 1-15/16" Base to Center Height, 5-3/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

HX35 Turbo Lab America Holset Cummins HY35 HX40 HE341 HE351 Turbo Rebuild Kit

  • For HY35, HX35, HX40, HE341, HE351, HE351CW.
  • Compressor Housing O-ring (Bearing Housing Must be Machined).
Check Stock