Top Stainless Pipes

GM Genuine Parts 42626074 Turbocharger Intercooler Hose, Black

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.C.
Check Stock

Triangle Dish Drying Rack for Sink Corner Roll Up Dish Drying Rack Folding Stainless Steel Multipurpose Over The Sink Corner Dish Drainer Mat for Kitchen (Grey)

  • Ergonomic Design: over the sink SUS304 stainless still triangle design multipurpose dish drying rack for sink corner. Triangle design helps to make the best use of sink corner space.
  • Displayed Dimensions: 16.3"L x 9.2"W X 0.31''H. 9pcs SUS304 Premium Stainless Steel Pipes. Please kindly measure your sink size firstly before purchasing this sink corner triangle Dish Drying Rack!.
  • This dish drainer can roll up and go in a drawer quickly when not in use. Works great and keeps the kitchen sink area looking neat, the best one of dish drainers for kitchen countertop.
  • Green Environmental Materials: made of SUS304 premium stainless steel pipes, this drying rack is very solid and sturdy. It can resist to constant use and rust for years. In terms of construction, the anti-slippery highest level silicone rubbery grips are firmly attached to ends of stainless steel pipes. those are our unique advantages.
  • Heat Resistant and Space Saver: Heat Resistant Dish Drainers Mat for Kitchen Sink Counter and Roll Up Dish Drain Rack: this kitchen dish rack is thermoresistant, and can resist up to 450°F. BPA-Free and you can run hot water over stainless steel dish rack, and even place hot pot on the dish racks without causing any damage.
Check Stock

51" Toilet Auger Grabber Tool, Flexible Grabber Unclogging Tool, Four Jaw Pickup, Stainless Steel Telescoping Pole, Toilet Snake for Grabbing Objects Blocked in Toilet Pipes/Drains

  • ...rm, pull the trigger, the grabber easily picks up items, it makes our dredging work easier. Note: When using it, do not use the product against the toilet wall, it may scratch your toilet!.
  • Product Dimensions: 51" overall product length, 7.4" red handle, 12" stainless steel hose, 43" spring loaded cable, 1.6" jaw diameter. NOTE: Pipes smaller than 1.6 inches in diameter cannot use this toilet snake grab..
  • High Quality Material: thickened non-slip handle, longer service life, galvanized spring, high quality stainless steel telescopic rod, soft universal guide tube. The clever design increases its cornering ability, and it can flexibly pass various elbows just by pushing the handle. Four-legged claw design, stronger grasping force, and the object grasped is not easy to fall..
  • Long Lasting: This toilet auger grabber comes with a thickened non-slip red ABS plastic handle with a 43" long thick stainless steel galvanized steel spring inside, high quality stainless steel gimbal and telescopic rod. High strength, not easy to rust, not easy to deform, is your indispensable home assistant..
Check Stock

‎DNA MOTORING ZTL-30SS 16 Pcs 3.0 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit Universal Fit

  • 【Universal Kit】Comes with 4 pcs Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • 【Specifications】16-Gauge Piping Walls.
  • 【Stainless Steel Construction】Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Easy To Use】Slip Fit Ends for Easy Installation, Provides Easiest Fabrication.
  • 【DIY Custom】Perfect Do-it-yourself Kit with Plenty of Options for your ,otorcycle, Automotive, Atv or Any Other Need you May Have.
Check Stock

General Tools PVC Pipe Cable Saw #858-24-Inch - Serrated and Cuts PVC, PE, and ABS Pipes - Hand Tools

  • DURABLE STAINLESS STEEL WIRE: Cutting pipes has never been easier. This serrated cutting cable slices through pipe up to 8” in diameter like a breeze. It makes clean cuts in PVC, PE, ABS pipes, flexible rubber, and Polyethylene tubing..
  • COMFORT GRIP HANDLES: Fabricated from stainless steel for solid and smooth cuts. This hand saw features an ergonomically designed handle for a comfortable grip that provides leverage when cutting pipe, allowing for ease of motion and control..
  • WORKS IN CONFINED SPACES: Ideal for HVAC technicians and contractors who need to get into tight spaces and challenging areas to reach. The cable wire works with pipes against walls, rafters, or where a standard cutter or hacksaw will not fit..
  • VERSATILE DESIGN: If you have a job that requires different size pipes, this is the tool for you. It cuts a variety of pipe sizes and doesn't require any special adjustments. Add this folding saw to your accessories and equipment essentials..
  • GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision tools for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity..
Check Stock

Shower head Shut Off Valve ,Water Flow Control Valve,Stainless Steel Valve NPT Thread(1/2\ Female X 1/2\ Male)

  • All parts of shower flower control valve are made of high-quality stainless steel, (stainless steel body, stainless steel handle, stainless steel ball) stronger and more corrosion resistant than brass and plastic..
  • The stainless steel water flow control valve is designed with a single lever. It can be turned on and off by only turning 90 degrees. Even if the hand is full of foam, the water flow can be easily adjusted and closed..
  • The 1/2" standard NPT thread can match most shower pipes and shower heads in the United States..
  • This stainless steel ball valve can be installed on hand showers, shower hoses, and pipes. Widely used in at home, bathroom, kitchen, RV, etc..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock

RESTEK 20250 Compact Ferrule for Agilent Gas Chromatography, Graphite, Fit =0.28 mm ID (Pack of 10)

  • Coupling pipe fitting for connecting and extending pipes.
  • Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

Flowmaster 15902 3in Universal Tailpipe Kit

  • This Universal Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability, 18-Gauge Piping Walls.
  • 18-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

‎DNA MOTORING ZTL-225SS 16 Pcs 2.25 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • 【Universal Kit】Comes with 4 pcs Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • 【Specifications】16-Gauge Piping Walls.
  • 【Stainless Steel Construction】Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Easy To Use】Slip Fit Ends for Easy Installation, Provides Easiest Fabrication.
  • 【DIY Custom】Perfect Do-it-yourself Kit with Plenty of Options for your ,otorcycle, Automotive, Atv or Any Other Need you May Have.
Check Stock

No. 1 to 5 Universal Rubber Winter Plug for 1/2 to 1 Inch Pipe

  • Safely seal off in-ground plumbing lines during freezing conditions!.
  • Winter freeze plugs are used to plug your swimming pool pipes after they have been drained to prevent water from entering the pipes and causing freeze damage..
  • The extra long taper allows for a more secure fit..
  • Extended bolt for plugging deeper into pipes..
  • Stainless steel bolts and washers. Large plastic wingnuts..
Check Stock

Amazon Basics PEX Pipe Cutters - 1/8-inch to 1-inch

  • PEX pipe cutters for quickly and easily cutting pipes to size.
  • Includes 1 piece of pipe cutter designed for PEX pipes ranging from 1/8 inch to 1 inch in diameter.
  • Sharp heat-treated stainless steel blade and powder-coated cast aluminum body for reliable strength.
  • Spring loaded handle ensures fast opening and quick, effortless cutting.
  • Note: this tool should not be used to cut metal pipes or cable wires.
  • Product dimensions: 7.9 x 1.5 x 1 inches (LxWxH).
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • ...Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience ....
Check Stock