Top Stainless Steel Bits

Hymnorq Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) for Stainless Steel Cast Iron and Hard Metals

  • M35 COBALT STEEL – Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • Point Angle – The 3mm bits are 135° split pointed, which is self-centering and will penetrate quickly with less pressure. Will not “walk” or “wander”. The other small ones are 118°..
  • FOR STAINLESS STEEL – Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • 50PC SET – The set includes 50pcs of metric M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm. 10 each metric drills in popular hobbyist sizes at low price. Manufactured to German DIN338 standard..
  • Packed in a plastic bag. These bits are quite small. Please refer to the picture including a size chart..
Check Stock

Pin Vise for Resin Molds Jewelry Casting, LEOBRO Steel Hand Drill with 10 PCS Drill Bit, Drill Press Vise, 210 PCS Keychain Supplies, Precision Hand Drill Kit for DIY Resin Keychains Jewelry Making

  • ... pin vise, 10 pcs steel drill bits(0.8-3mm), 1 drill press vise, 210 pcs keychain supplies(contain key rings with chains, screw eye pins, jump rings), great for creating epoxy resin jewelry, keychain, necklace, earrings, Christmas decors, and wood working, sculpturing, etc...
  • Well-made Steel Hand Drill: 12cm/4.7inch stainless steel hand drill, sturdy and long-lasting. Precisely designed 3-jaw chuck, clamp the drill bit uprightly and firmly. With rough texture on turning parts, prevent fingers from sliding and make rotation easier. Shiny silver look, classic and graceful..
  • 10 Drill Bits for Selection: Contains 0.8, 1, 1.2, 1.5, 1.8, 2, 2.2, 2.5, 2.8, 3 mm drill bits, meet your different needs. Made of stainless steel, hard to bend or crack, durable. All bits packed nicely in a plastic case with compartments and according marks, well prevent loss, good for finding..
  • Drill Press Vise for Fixing: Help hold parts in place while you drill/glue/sculpture, great for DIY precision work. Clamping range: 0-2 inch (0-5.3 cm), can be adjusted easily, fit for holding small art pieces. Made of quality plastic, sturdy, clamp securely, long-lasting..
  • 210 PCS Keychain Supplies: 100 pcs screw eye pins (gold&silver, 50 for each), 100 pcs jump rings (gold&silver, 50 for each....
Check Stock

PANA Professional 3/32" Shank Size - Flat Top Small Barrel White Ceramic Bit - Nail Drill Bit for Dremel Machine

  • [ Professional Nail Drill Bits Set ] - The nail drill bits kit comes with 6 ceramic nail file bits, 3 ball head diamond carbide cuticle drill bits, 2 quartz drill bits, 1 mandrel drill bit and 1 brush bit. Meeting various nail art needs. Suitable for nail art beginners and professional manicurists..
  • [ 6 Ceramic Drill Bits for Nail ] - The 6 different ceramic drill bits are excellent in heat dissipation and abrasion resistance. Sharp enough to finish various nail artwork like sharpening, grinding, neatening, carving, smoothing, polishing and reshaping gel or acrylic nails..
  • [ 3 Diamond Carbide and 2 Quartz Drill Bits ] - Easy to clean the cuticle area, sidewalls and under the nail edge with 3 size diamond carbide ball bits. There are 2 quartz bits with different shapes for polishing, surface buffing and smoothing..
  • [ Fit Most Nail Drill Machine ] - Universal 3/32 inch (2.35mm) stainless steel shank fits most electric nail drill machines. Suitable for nail salon, beauty parlor, spa or personal manicure pedicure, DIY nail art at home..
  • [ Portable Size] - Comes with a small transparent storage box, easy to find the drill bit you need. The compact size allows you to carry the drill bits anywhere..
Check Stock

Percussion/Jigsaw Massage Bits Tips W/Universal T-Shank Deep Tissue 4 bit Set

  • DURABILITY: Our Massager Tips are made from high quality Stainless Steel and Silicone for extra durability and precision milled ..
  • 4 BITS SET: This set has 4 bits with different harness to provide overall benefits to different area of the body.
  • UNIVERSAL T-SHANK- Out Bits have universal T-shank which fits in most common jigsaws without modifications..
  • FASTER RECOVERY- By using massager bits you can can increase blood flow and mobility, and helps in faster recovery..
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • ...sts long working life, packed with nice plastic case for safety storage and protection..
  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are recommended to prevent stab wounds..
  • √ [Warmth Tips] The speed of the rotary tools usually is 6000-50000 revolutions per minute, long service life, reduce the inefficiency turnover. Machining drill bits, easy to cutting, durability. Really nice carbide drill bits..
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock