Top Stainless Steel Conduit Reducing Couplings

Milwaukee 48-22-3108 Quick Adjust Reaming Pliers, 8-Inch

  • Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
  • Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
  • Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
  • Forged Alloy Steel - For Maximum Tool Strength.
  • Rust Protection - Increases tool life by reducing corrosion.
Check Stock

TEMCo THA034 1 Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 -16 Thread

  • Conduit Fitting Size: 1", Actual Hole Size: 1.33".
  • Fits Draw Stud Size: 3/4"-16 (TEMCo THA001).
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

TEMCo THA005 3-1/2 Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 -16 Thread

  • Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93".
  • Fits Draw Stud Size: 3/4"-16 (TEMCo THA001).
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

TEMCo THA032 1/2 Conduit Punch and Die For Hydraulic Knock Out Driver

  • Conduit Fitting Size: 1/2", Actual Hole Size: 0.86".
  • Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • ...Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience ....
Check Stock

Certified Appliance Accessories IM48SS Ice 4-Feet Maker Connector

  • 1/4″ FCM (Female Compression) x 1/4″ FCM stainless steel fittings with washers for secure connection.
  • Braided stainless steel resists punctures, crimping & kinking.
  • Stainless steel couplings & brass stems provide secure connections.
  • Clear vinyl surrounds flexible & durable PVC inner core tubing that’s woven with polyester for added strength under pressure.
  • UPC (Uniform Plumbing Code), NSF 61 & 372 (National Sanitation Foundation) & CSA (Canadian Standards Association) certified ensures product safety.
  • Durable design protects against bursting & cracking.
  • Fits All Refrigerators, Won’t Kink or Crimp in Tight Spaces, Exceeds all Requirements for Flexible Water Connectors, Retail Clamshell Packaged, Meets or Exceeds Industry Certification Standards & Appliance Manufacturer Requirements.
  • UPC, CSA, NSF/ANSI 61 and NSF 372 Lead-Free Certified, ASM A112.18.6 & CSA B125.6.
Check Stock

TEMCo THA041 3-1/2 Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

  • Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93".
  • Fits Draw Stud Size: M20x1.5mm (TEMCo THA010). Fits Driver: Old style TEMCo TH0037.
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

IDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
  • Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
  • Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
  • Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Fluidmaster 12IM60 Ice Maker Connector, Braided Stainless Steel - 1/4 Compression Thread x 1/4 Compression Thread, 5 Ft. (60-Inch) Length

  • 1/4 x 1/4 INCH CONNECTOR HOSE – 1/4 inch FCM (Female Compression) x 1/4 inch FCM stainless steel fittings with washers & permanently attached stainless steel couplings & brass stems provide secure connection..
  • BUILT TO LAST - Clear vinyl surrounds a flexible & durable PVC inner core tubing that's woven with polyester for added strength under pressure..
  • STAINLESS STEEL - The premium stainless steel outer braid resists punctures, crimping and kinking. This durable design protects against bursting & cracking..
  • CERTIFIED FOR YOUR SAFETY – This hose is UPC (Uniform Plumbing Code), NSF 61 & 372 lead-free (National Sanitation Foundation), & CSA (Canadian Standards Association) certified for product safety..
  • 5-YEAR LIMITED WARRANTY – If your hose isn’t in perfect working condition for at least 5 years, we’ll send you a new one free of charge..
Check Stock

Boeray 11' Fiberglass Running Electrical Wire Cable Pulling Fish Tape Kit with 5 Different Attachments and Fish Tape Tool in a Carrying Case

  • Material: Fiberglass. Fiberglass better than Plated Carbon Steel, this fish tape will not break when folded, faster, easier pulls: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • Size: Length:1.1FT (33cm)/pcs, Diameter: 0.16" (4mm), can be extended up to 11FT and combined with second kit.
  • Multifunctional:Tool comes with Includes Fiberglass Rod, Plus 10in Chain Noodle, connection, Hooks, and Carrying Case.Can be combined with additional kits,very convenient.
  • Fish Tape Fastener:Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly.
  • Use for your interior and exterior Electrical Site Wiring like, Outlet, Plug, Socket, light fixture, Ceiling Fan, Dimmer, Switch, short runs installing electrical box, Electrical Panel, Subwoofer Box, Switch Box, Junction Box, CPU, Breaker Box, Receptacle box, Transformer, Doorbell, Intercom, Surveillance Camera, DCC, Security systems, Smoke detector, Thermostat, Appliances, Hot Tub, Telephone/Internet Line or Cable TV Coax.
Check Stock

TEMCo THA040 3 Conduit Punch and Die For METRIC Hydraulic Knock Out Driver M20x1.5mm Thread

  • Conduit Fitting Size: 3", Actual Hole Size: 3.5".
  • METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock