Top Stainless Steel Gas Hose

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...(OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
  • Included hose clamps tighten seal on hose and are winged for easier use.
  • PACKAGE CONTENTS: CO2 Ball Lock Disconnect Stainless Steel Keg Lock package includes (12) pieces total (6 per keg) – (2) ball lock liquid disconnect fittings, (2) ball lock gas disconnect fittings, (4) swivel nuts, and (4) hose clamps for your convenience.
Check Stock

6KG Propane Melting Furnace Kit Stainless Steel 304 2600℉ Smelting Copper Aluminum Gold Includes Crucible and Tongs

  • All In All: The complete set covers all of the basics, includes Furnace, burner, gas hose with regulator, 6KG crucible, fire pad, tongs, PTFE tape, manual, worry-free 12-month warranty, technical support 24 hrs..
  • No Rust At All: Heavy Duty stainless steel 304 furnace body, Anti-rust, corrosion resistance, durable..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 135,000 BTU output, heat up to 2600°F/1426°C, melt copper wire in 15 minutes..
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • Safety: Come with CSA gas hose and 30 psi regulator, professional design for working with America standard Propane Tank directly, Easy to use.(It does not work with BBQ low pressure gas tank fitting).
Check Stock

Appliance Pros Flexible Stainless Steel Gas Line for Dryer Gas Hose Connector Kit Comes with 1/2 OD 1/2 MIP x 1/2 FIP Stainless Steel GASLINE72

  • GAS DRYER INTENDED - A stainless steel gas line hose designed mainly for gas dryers. It measures 72" and has an inner dimension of 3/8". Other....
  • CORRUGATED DESIGN - Achieve full flexibility, because, with this corrugated gas appliance connector, lets you snake it into small spaces including....
  • PREMIUM QUALITY - A corrugated stainless steel gas dryer hose that has compression fitting to create a secure metal connection for heavy-duty use.....
  • CONVENIENT INSTALL - No tools required to install the piping. It features male and female iron pipes for easy connections. Just make sure your sizing....
  • ONE YEAR WARRANTY - With no compromise to quality, we provide premium durable products for the long-term, which is a seal to ultimate safety. This....
Check Stock

Puxyblue 72 Inche Gas Hose Connector Kit for Dryer,Flexible Stainless Steel Gas Line Come with 1/2' OD 1/2' MIP x 1/2' FIP

  • Made for Gas Dryers: Flexible Stainless Steel Gas Line that's mainly designed for gas dryers.It measures 72 inches and come with 1/2" OD 1/2" MIP x 1/2" FIP..
  • Corrugated Design: The stainless steel gas pipeline hose adopts a corrugated design, which can be installed and meandered into small spaces including corners and bends. The bright yellow outer skin also improves the recognition..
  • Premium quality:The product is made of high-quality, sturdy and durable stainless steel material, which is not easy to damage and it can help prolong the life of your dryers..
  • Easy to Install: Fixing it yourself is simple and cost-effective.No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • Dispel your Concerns: If you are not satisfied with the product for any reason, you may request a replacement or a full refund. If you are not sure if this replacement part is right for your appliance, please feel free to contact us or ask a question through Amazon, it would be our pleasure to serve you!.
Check Stock

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ...changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
  • ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
  • ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. RV Pigtail Propane Hose: 1/4" Inverted Male Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of dura....
Check Stock

Teton-Bond Petrobond Ultra-FINE (190 Mesh) Foundry Jewelry Metal Casting Sand for Ultimate Detail

  • Safety: Come with CSA gas hose and regulator, professional design for working with America standard Propane Tank directly, Easy to use..
  • No Rust: Heavy Duty stainless steel 304 furnace body, long life design..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 135,000 BTU output, melt copper wire in 15 minutes..
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • All In One: The complete set covers all of the basics,includes leather gloves, #4 ingot mold (#4-2kg-113ml-3.82fl. oz), Furnace, burner, gas hose with regulator, 12KG crucible, fire pad, tongs, PTFE tape, carry bag, manual, worry-free 12-month warranty, technical support 24 hrs..
Check Stock

Fanttik X8 APEX Tire Inflator Portable Air Compressor, 2X Faster Inflation, 150PSI Cordless Tire Inflator with LCD Dual Screen, Suitable for Cars, E-Bikes, Motorcycles, For Up to 26.3 Inch Tires

  • 【NQN Upgraded Stainless Adjustable Propane Regulator】NQN 12FT Stainless Braided Propane Hose Adapter use the pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA). This Pressure Gauge help you read and control the heat with a precise level of accuracy. Come with a brass orifice connector 3/8 Flare MNPT x 1/8 MNPT. This orifice can be for pipe fitting, grill, propane burner, propane heaters and all propane appliances that share the fittings..
  • 【Premium Material】NQN 12FT Stainless Braided Propane Hose Adapter is made of durable stainless steel braided, with weather resistance, anti-corrosion, anti-aging, air tightness, heat-resistance, flexibility features, which defeat ordinary rubber that ages in the sun. Durable solid brass provides secured connections between grill and turkey fryer or burner and tank. This Propane Hose ensures secure, air tightness and stability..
  • 【Standard Fitting & Wide Application】12 Feet 0-30 PSI High Pressure Stainless Steel Hose with 3/8” female flare fitting, fit for gas grills, gas stoves, burners, turkey fryers, cooker, smokers, fire pit and heater, hot water heater, a....
Check Stock

Kegerator CO2 Gas Line Beer Hose Beer Gas Line 5/16 Red Gas Line 3/16 Beer Line with Hose Clamp for Home Brewing Beer Tower Beer Keg Kegging by PERA

  • 1.Include: 5ft Clear Beer Hose ID 3/16" OD 7/16", 5ft Red Gas Hose ID 5/16" OD 9/16", two pcs 8-12mm Hose Clamps and two pcs 10-16mm Hose clamps.
  • 2.Material: PVC Material for Beer Gas Line and Stainless Steel for Worm Clamps.
  • 3.Future: 1/4" Wall thickness of The Gas hose can endure a higher pressures of a draft system. The Beer tube can resistant most alkali, alcohol, and mild acids and chemicals. Worm Clamps will confirm no leak problem during the connection.
  • 4.Widely Use: The Beer Tube usually connect Beer Tower, Beer Keg, Beer Kegerator and the Gas Tube usually Connect Gas Regulator, Gas Manifold, Tank. This set will complete your Home Brewing Beer Keg System.
  • 5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..
Check Stock

FERRODAY Ball Lock Gas Line Assembly 5ft Red Long Tubing 5/16 Ball Lock Gas Disconnect Set Home Brewing Kit Ball Lock CO2 Gas Hose Assemble for Draft Beer Home Brewing

  • [High Quality Material]: The product is made of food safe stainless steel and premium PVC. The smooth surface of stainless steel is rust-proof,....
  • [No Leakage]: The ball lock disconnect device is perfectly matched with the gas tubing. And the stainless steel hose clamp clamps the ball lock gas....
  • [Widely Used]: It can be connected with both barbed regulators and swivel regulators and various of other kegs, beer barrels, ball lock kegs, for....
  • [Right to Use Kit]: A ball lock disconnect connector, a pair of 5/16 stainless steel swivel nuts and 2 stainless steel hose clamps, 1 of 5ft 5/16 ID....
  • [Quality Promise]: We are aimed at providing high quality products as well as good service. Please feel free to tell if any problem, we will always be....
Check Stock

GONGYI 3KG Mini Smelting Furnace Kit Stainless Steel Material 2700℉ Melting Gold Copper Aluminum Recycle Includes Crucible Leather Gloves and Tongs

  • All In All: The complete set covers all of the basics, includes Furnace, burner, gas hose with regulator, 3KG crucible, Leather Gloves, outside fire....
  • No Rust At All: Heavy Duty stainless steel 304 furnace body, Anti-rust, corrosion resistance, durable..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 80,000 BTU output, heat up to 2600°F/1426°C, melt copper wire in....
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • Safety: Come with CSA gas hose and 20 psi regulator, professional design for working with America standard Propane Tank directly, Easy to use.(It does....
Check Stock