Top Stainless Steel Pan Head Screws

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400303

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 30mm, Full Thread Length (LgV) = 27mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

Spax T-STAR Plus, 4Cut Panhead – Universal Screw, fully threaded, Stainless Steel A2, 1.4567 – 0207000350203, 0207000400203

  • Usage: Universal outdoor. High corrosion protection thanks to A2 stainless steel.
  • Pan head. Ideal for fixing fittings. Optimal power transmission and better fit on SPAX T-STAR plus T20 with guide pin even with overhead work.
  • Power and battery saving: no need for pre-drilling (depends on wood). Reduced splitting of wood due to 4CUT tip with 4 sides. Standard SPAX corrugated profile for easy separation of wood fibers.
  • Made in Germany : TUV certified. Officially approved: European Technical Approval for self-tapping screws for assembling wood (ETA-12/0114).
  • Contents: 1 SPAX box, 200 universal screws, T-STAR plus, Pan head, Full Thread, 4CUT point, Stainless steel A2, 1.4567, Thread diameter (脴d1)= 4mm x Total Length (Ls) = 20mm, Full Thread Length (LgV) = 18mm, Head diameter (脴dk) = 8mm, Bit not included.
Check Stock

The Hillman Group 122653 White Insulated Staples, 15-Pack

  • 【Package include】50PCS 1/2 (13mm) Inch Rope Light P-Style Mounting Clips Black Nylon Plastic Cable Clamps with 50pcs 304 Stainless Steel Pan Head Phillips Screws.
  • 【Quality】These nylon rope light mounting clips are Durable, Acid-resistance, corrosion resistance, high tensile strength, aging resistance.stainless steel pan head Phillips screws allows you to mount in the wet weather and without rust..
  • 【Application】 Perfect application for mounting light sorting at outdoor such as patio, big event and party etc. Or indoor rope light sorting out, maintaining alignment of the LED bulb etc..
  • 【easy yo use】The P-Style design mounting clips are flexible, simple and innovative. Perfect design you just need to loop the clip over the rope light and screw it into the deck/wood/wall..
  • 【Buy with confidence 】for your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them.
Check Stock

The Hillman Group 43794 1/4-Inch Internal Tooth Lock Washer, Stainless Steel, 50-Pack

  • Parts work best with large head screws such as round, pan, binding, and washer-head screws.
  • Included variants run from #4 to 1/2" in screw size.
  • Full assortment includes both internal and external variants.
  • Stainless steel finish for best-in-class corrosion resistance.
  • These stainless steel external toothed lock washers feature a 5/16" screw size.
Check Stock

Stainless Steel Pan Head Self Drilling Screws #6 x 1/2\ (3/8\ to 3-1/2\ Lengths Available) 100 PCS, Phillips Drive Self Tapping Screws Sheet Metal Screws, Full Thread

  • Package Content: 100pcs x Pan Head Phillips Screws.
  • Thread Size (D*L): #2 X 1/4 inch, Please check the size of the screws before purchasing.
  • Material: 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
  • The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole.
  • Pan heads are slightly rounded with short vertical sides. Phillips drive is x-shaped for installation with a phillip screw driver.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Adiyer M8 Screws for Samsung TV Wall Mount 304 Stainless Steel M8 x 45mm TV Mounting Bolts Screws for Samsung TV with 25mm Long Spacers

  • M8 x 45mm screws spacers washers kit fit for Samsung TV wall mount bracket..
  • Tested to fit for Samsung TV model: UN49MU8000, UN65MU8000, UN50NU6900BXZA, QN65Q6FNAFXZA, 2020 samsung 43” QLED Q60T, 2018 Samsung 65″ QLED, UN55KS8000, UN65KS8000, NU7100, NU7200, etc..
  • This M8 x 45mm screws kit fit for most samsung tv mount bracket over 43″, and please check your TV user manual first to choose correct mounting screws..
  • 304 stainless steel Phillips pan head Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length.
  • Head Size: 13mm x 6mm/ 0.51″ x 0.23″(D*H).
  • 4x screws M8x45mm, 4x plastic spacers 15mm, 4x plastic spacers 10mm, 4x 2mm thick stainless steel flat washers, 4x 1mm thick stainless steel flat washers.
Check Stock

Amarine Made Boat Marine Fishing Stainless Steel Side Mount Rod Holders with Brackets

  • high quality, stainless steel side mount marine rod holders with stainless side mount brackets.
  • Mirror finished 100% 316 Stainless steel construction (not 304), for sleek appearance and to suit today's modern watercraft.
  • Rubber insert to protect your fishing rod from any wear against the stainless surface.
  • Can be mounted vertically or at any desired angle, onto a flat vertical surface.
  • Easy to install, using 4 x 6mm diam. pan head mounting screws (screws not included), Stainless stopper pin built into the base of the rod holder to....
Check Stock

Extra Long Outlet Screws Long Electrical Outlet Screws Machine Screws Device Mounting Screws Electrical Outlet Extender for Fix Wonky and Sunken Outlets 30 Pieces,6-32 x 1-1/2 Inches

  • Proper size: the size of each machine screw featuring a cross recess pan head is 1.5 inches, fit for when you need extra length to mount backsplash....
  • Wide applications: cross recess head makes our device mounting screws become more suitable for fixed sockets, sockets, elbows, switches and dimmers,....
  • Reliable material: the device mounting screws are not easy to rust, punched and have good corrosion resistance because of stainless steel, which makes....
  • Heat treatment: after heat treatment, the structure of the device mounting screws can be improved, the composition is uniform and the grain is....
  • Ample mounting screws: you will gain 30 pieces of 6-32 x 1-1/2 inches pan head machine screws, the quantity is enough for you to use at home or work.
Check Stock

Amarine Made 4-Pack Boat Marine Fishing Stainless Steel Side Mount Rod Holders with Brackets-7743S

  • High quality, stainless steel side mount marine rod holders with stainless side mount brackets.
  • Mirror finished 100% 316 Stainless steel construction (not 304), for sleek appearance and to suit today's modern watercraft.
  • Rubber insert to protect your fishing rod from any wear against the stainless surface.
  • Can be mounted vertically or at any desired angle, onto a flat vertical surface.
  • Easy to install, using 4 x 6mm diam. pan head mounting screws (screws not included), Stainless stopper pin built into the base of the rod holder to....
Check Stock