Top Stainless Steel Polishers

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

  • High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
  • Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
  • 1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
  • Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
  • Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
Check Stock

FPPO 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Removal of Rust Deburring on Metal Surface with 3mm Shank,Mini scouring pad Brush Polishing kit(grit 320 red 50pcs)

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:1 inch(25mm).Shanks are 3mm（approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Rotary Tools, Polishers, Hand Drill etc..
Check Stock

POWERTEC 71645 Assorted 8 Inch Buffing Wheels Set w/White 70 ply and Yellow 42 ply with 5/8 inch Arbor Hole 2 PK

  • INCLUDES: Yellow and White Buffing Wheels for bench grinder, 8 inch 5/8 arbor hole.
  • FUNCTION: Primarily used in combination to buff and shine metals, hardwoods and other materials using polishing compounds or rouges, offering reliably smooth and professional looking results.
  • FEATURES: A combination of grit types (fine and medium) offer you project versatility, along with an extra thick configuration for durability and added polishing surface - PLUS flaunts a spiral sewn design which firmly holds the ply formation together for balanced compound distribution pressure.
  • VERSATILE: Works exceptionally well for post sanding, metal and jewelry polishing, residue etching, blade/ custom knife making and other applications that require buffed or polished aluminum, brass, stainless steel, chrome and acrylic.
  • SPECIFICATIONS: White Cotton 8 inch Wheel Face (70 ply) with 5/8” Arbor Hole | Yellow 8 Inch Wheel Face (42 ply) with 5/8” Arbor Hole to accommodate most bench grinders, buffers and polishers.
Check Stock

Koblenz 45-0105-2 Replacement Pads & Brushes, Brown

  • Pack of two 6" replacement cleaning/polishing pads.
  • For use on all bare floor finishes to clean or polish.
  • Compatible with all Koblenz shampooers/polishers & with Kenmore & Regina shampooers/polishers using 6" attachments.
  • Includes 2 replacement plastic retainer clips.
Check Stock

TCP Global Superbuff 5/8

  • Extender bolt adapter has the standard rotary polisher 5/8" thread size.
  • Pad adapter is required to use with double sided pads and rotary polishers.
  • Use to extend spindle on polishers when using double-sided buffing pads.
Check Stock

Maxshine Machine Polisher Wall Holder/Rack - Single

  • Finest Polisher Holder gives you a holder on your polisher, provides space for all types of polishers.
  • Due to the use of rubber ring, polishers in the bracket to maintain soft and comfortable, will not damage the surface paint.
  • Just put your polisher on the holder, it's very convenient and can save some space for you.
  • Black finish coated with powder can resist rust and/or corrosion.
  • Iron, firm construction provides a safe place for your polisher.
Check Stock

Siking Stainless Steel Cake Comb Metal Cake Scraper, Cake Buttercream Icing Smoother Edge Side Sculpting Decorating Tools (Large Scallop), SCC- 1-4

  • ☀ Package Included: 2 silver cake scrapers, you can make special cakes according to different themes, they are good cake decorating tools.
  • ☀ Size: The size of the jagged pattern is approximately 4 x 11 inches, and the size of the wave pattern is approximately 4 x 11 inches, which can easily carve cakes of all sizes.
  • ☀ Material: Our cake comb is made of stainless steel, with smooth surface, safe to use, durable, easy to clean, and can be used for a long time.
  • ☀ How To Use: First, you can put the cake on the shelf, and then keep the cake stand moving, and at the same time align the jagged or wavy or smooth edge with the edge of the cake to create a beautiful and even pattern on the side of the cake.
  • ☀ Multi-purpose: They can be used as cake scrapers, cake smoothers, butter cake polishers, cake dividers, you can create beautiful patterns on butter cakes, or use straight edges to create a perfect smooth surface, they are the perfect cake decorating tools.
Check Stock

Silicone Knife Edge Wheels White Coarse Jewelry Polishing EVE Germany Pack 6

  • Silicone polishers, knife edge wheel impregnated with silicon carbide, produce a super high luster finish useful for various metals and alloys. The White Silicone polishers are normally used as the first step for surface prepping - removal and smoothing, cleaning prior to polishing, Step #1..
  • Wheels are 7/8" x 5/32" with a 1/16" pin hole center for use with mini screw head mandrels..
Check Stock

QuickT GDS701K Universal Surface Grinding Angle Grinder Dust Shroud 5 Inch - Dust Cover Collector with Vacuum Attachment for Angle Hand Grinders

  • UNIVERSAL DUST SHROUD - QuickT universal surface grinding 5 inch grinder dust shroud for handheld angle grinder, fits all known brand 5 inch grinders and polishers. Best value professional grinder dust shroud 5 inch.
  • FITS KNOWN BRAND POLISHERS - Uniquely designed 5 inch angle grinder surface grinding dust shroud with metal arbor holder collar that snug fits to Makita, Milwakee, Metabo, Dewalt 5 inch hand held angle grinders, the brand specific various size collar rings supplied with the shroud to fit varying sizes 5 inch grinders polishers arbor across brands grinder vacuum.
  • EASY REACH TO WALL EDGES - Sliding grinder dust cover edge to easily reach to the flush wall edge grinding. One finger touch sliding head to put on and put off, A surface grinding dust shroud with ease of use.
  • VACUUM CONNECTION, OPTIMAL DUST SUCTION - In-built adapter to connect vacuum cleaners, angle grinder dust collector and grinder with vacuum attachments. Make your angle grinder with dust shroud ideal for optimal dust collector for concrete surface or any other hard surface grinding dust collection.
  • DUST GUARD WITH REPLACEABLE BRUSHES - Angle grinder dust cover guard with brushes for easy Height adjustment as tool grinds, easy to replace brushes , no need to change shroud only c....
Check Stock

TEMO 3 pc 5 Gram Diamond Polishing Lapping Paste Compound Finishing Set 0.5, 1.0, 3.5 Micron

  • 3 pc 5 gram syringes diamond polishing or lapping paste finishing set.
  • easy for use and avoid contamination. Best use with the wool polishers for polishing..
  • Suitable for use on jewellery & gemstone, steel & hard metal, aluminium & zinc, all metallurgical purpose..
  • The item include: 0.5 Micron - Final Polish (Creamy), 1.0 Micron - Mirror finish (Yellow), and 3.5 Micron - Fine Polish (Red).
Check Stock

Oudtinx 8pcs 5 Gram Diamond Lapping Paste Polishing Compound for Fine to Final Polishing, Grits 1000# 10000# 0.5-10 Micron

  • Environment friendly, made with resin, wax and diamond sands..
  • For best results, use with felt bobs or wool polishers..
  • Great for jewellery, gemstones, steel, hard metals, aluminum, zinc.
  • No Special cleanser required, simply wipe clean with water..
Check Stock

Oudtinx 12pcs 5 Gram Diamond Lapping Paste Polishing Compound for Fine to Final Polishing, Grits 1000# 10000# 0.5-40 Micron

  • Environment friendly, made with resin, wax and diamond sands..
  • For best results, use with felt bobs or wool polishers..
  • Great for jewellery, gemstones, steel, hard metals, aluminum, zinc.
  • No Special cleanser required, simply wipe clean with water..
Check Stock