Top Stainless Steel Sampling Valve

SturdyShape Premium Soil Probe. Soil Sample Probe is Polished Inside, 12in, Stainless Steel 304. Soil Probe with Handle Comes with 3bags&1brush- Sturdy Soil Probes for Soil Sampling

  • Highly polished - The soil test probe is highly polished on the inside of the soil core sampling tool, this way will prevent hand injuries and soil clogging up into the soil core sampler.
  • Made to last - The soil probe steel is Stainless steel 304. The soil tube is continuously welded between the 2 parts, which will make the soil sampler tool resist intense pressure and last lifelong..
  • Good grip - We design the soil sampler probe with a 7-inch handle to increase grip and to be able to use it with both hands. The soil sampling probe is lightweight, easy to use, and carry..
  • Application - Taking care of your lawn means that you do take soil sampling, and keep track of the nutrients in your soil. SturdyShape soil testing probe will work with any type of soil, wet or dry..
  • Soil sample kit - Stainless steel metal soil probe 12 x 7 inch, 3 reusable zip bags to send you samples for testing, and 1 cleaning brush to make sure you keep your soil sample tool clean..
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • ...ombining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight..
  • To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and r....
Check Stock

Big Autopart Valve Cover Bolts, Chrome Valve Cover Wing Bolts for Chevy V8, 4 Pack

  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement. for sbc valve cover bolts wing nuts.
  • ★High-quality materials ---- Stainless steel is resistant to corrosion, high temperature, low temperature, long service life, and reduces the cost of replacement..
  • ★High-quality accessories ---- Matching the original car, it is worth buying high-quality accessor....
Check Stock

Baldwin PA2503 Air Element

  • Provide accurate integrated sampling without a sampling pump.
  • Convenient smaller size connects easily to miniature canisters.
  • Available in stainless steel or with Siltek treatment for greater inertness.
Check Stock

RESTEK 24168 Integrated Passive Air Sampling Complete Kit, 0.0030 Orifice, Stainless Steel

  • Provide accurate integrated sampling without a sampling pump.
  • Convenient smaller size connects easily to miniature canisters.
  • Available in stainless steel or with Siltek treatment for greater inertness.
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

10 Pieces Stainless Steel Lab Spatula Micro Sampling Scoop Double Ended Mixing Spoon Laboratory Measuring Spoon for Powders Gel Cap Filler

  • 2-In-1 design: our stainless steel lab spatula has 2 different tips, which are convenient for you to retrieve powders and mix ingredients together in deep container, you can also use the flat end for transferring or handling powders.
  • Multi function tool: the double ended mixing spoon will be your practical and accessory helper, they are suitable for laboratory, botanical and hobby using and applied for science tasks, scooping up reagents, powders and gel cap filler.
  • Everlasting material: these micro sampling scoops are made of 304 stainless steel, durable and not easy to rust and deform, you can use them at ease for a long time.
  • Long handle and proper size: the laboratory measuring spoons are designed with proper size and long handle, which are ideal for mixing or sampling different compound, bring you efficient work condition.
  • What you get: the package comes with 10 pieces stainless steel lab spatula with different specifications, sizes and shapes, which can meet your different needs and provide you much choice to complete your work.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

304 Stainless Home Brew Beer Keg FermZilla Liquid Floating Dip Tube Filter Fit Ball Lock & Pin Lock corny Keg SS Ball Float 80CM Silicone Dip Tube

  • For the beverage out，you'll have a silicone dip tube with stainless steel float, allowing you to always draw from the clearest beer at the top of....
  • 5/16"Silicone Dip,you can connect your faucet/sampling valve or other devices..
  • The silicone dip tube is 80CM long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to....
  • WIDE USE,if you want draw from the Liquid at the top of the tank..
  • Made of 304SS This floating dip tube allowing you to draw the clearest beer first from the top of the beer kegs.
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • [Professional Factory]We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressur....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

CKAuto 4 Pieces TR416 Metal Valve Stems Outer Mount Fits .453\ & .625\ Rim Holes Long 1 1/2\

  • 【Package Information】You will receive 4 pieces of stainless steel valve stem extensions and 6 pieces of brass valve stem extenders in the package. Sufficient quantities can meet your daily use and replacement needs..
  • 【Reliable and Durable】Made of copper nut and stainless steel braided, the valve stem extensions are sturdy and solid, which can be used for the long term. The precise weaving technology protects the inside of the product from damage..
  • 【Universal Connector】This valve stem tool can fit 99% of the valve cores and air pumps of car models, and you can apply them on most cars with standard American tire valves, like RVs, bicycles, motorcycles, trucks etc..
  • 【Size Details】The stainless steel value stem extension equips two lengths, one approx. 7 inches and another 12 inches. And there are 3 different angles in the tire valve extension adaptor, 45 degrees, 90 degrees and 135 degrees..
  • 【Easy Installment】First screw the metal valve stem extender on your tire valve, then connect the hose to the tire inlet through the valve stem extension to inflate the tire. The right angle bend allows easy access for the pump. Easy operation..
Check Stock