Top Stainless Steel Swaging Tubes

Loos Cableware 667-8X Stainless Steel Fork End for 1/4\ Diameter Wire Rope

  • Convenient package of one swage fitting for 1/4" cable.
  • 316 Stainless Steel Fork End for swaging on to Wire Rope.
  • 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

Muzata 200pack Aluminum Crimping Loop Sleeve for Hanging and Securing 5/32inch(4mm) 1/8\ 1/16\ Wire Rope Single Barrel Ferrule CableLine End CB39

  • ... doesn't fail under load. Easily secure loops when anchoring cable by compressing with vise, pliers, compression tool.
  • These wire rope crimp Loop sleeve are made of aluminum alloy, which provides corrosion resistance and attractive appearance and durability to these wire rope sleeves, They are great to work on 5/32" stainless steel cable array for deck railing, properly crimped it will support 200lb load. These wire rope cable sleeves are the most economical solution for dog Leashes, Clothes Lines, Fishing Wire, Deck Railing, Stair Railing, and any other projects require loop ends on wire ropes..
  • Specifically designed for 5/32 In (4mm) Stainless steel cable wire rope, simply slide the cable into the wire rope sleeve, then pass the end of the rope back through the remaining ferrule to form an appropriately sized loop. After using a mechanical or hydraulic swaging tool to obtain the full holding power of stainless steel oval sleeves. It really depends on how good your swaging tool is. Please search B06XD4DY22 to purchase the recommended hand crimping tool..
  • CableGenie system - This product belongs to the wood CableGenie cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CR73 or ....
Check Stock

BLIKA 9 Pcs Wire Trellis Kits Wire Trellis System for Climbing Plants Vines and Green Wall Trellis Wire Kits

  • ✅Application: Wire Trellis Hubs are specifically designed for running trellis wire along walls and other vertical surfaces, to help your vines,....
  • ✅Material: Made of high quality stainless steel with a high quality finish, super strong resistance to rust, water and corrosion..
  • ✅Size: 40 mm Trellis wire hubs, suits 1/8” wire rope cable..
  • ✅Easy to Install: Succesful installation is quite simple and doesn't require any special crimping or swaging tools. To install the wire, thread the....
  • ✅What you get: 15m T316 Stainless Steel Cable + 9 Pcs Green Wall Stainless Steel Hubs + 9 Pcs Screws + 9 Pcs Wall Anchors + 20 Pcs Plastic Wire Caps....
Check Stock

Flexzion Flaring & Swaging Tool Kit 45 Degree Tubing 1/8 to 3/4 inch for Soft Copper Tube Extrusion Type Water Gas Line Automotive Plumbing 14 Pieces Cone with Portable Carring Case

  • Copper tubing flaring + swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • The 45 degree cone for flare. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke. All in a hand carrying plastic case red color box.
Check Stock

BLIKA 20 Pcs Green Wall Stainless Steel Hubs Wire Trellis Kits Cable Trellis System for Climbing Plants Vines and Green Wall

  • ✅Application: Wire Trellis Hubs are specifically designed for running trellis wire along walls and other vertical surfaces, to help your vines,....
  • ✅Material: Made of high quality stainless steel with a high quality finish, super strong resistance to rust, water and corrosion..
  • ✅Size: 40 mm Trellis wire hubs, suits 1/8” wire rope cable(400FT stainless steel cable: B083X5X3SL)..
  • ✅Easy to Install: Succesful installation is quite simple and doesn't require any special crimping or swaging tools. To install the wire, thread the....
  • ✅OUR PROMISE: We go the extra mile to ensure you are fully satisfied with your purchase. If you're not satisfied with this item at any time within....
Check Stock

Ateco Cake Decorating Set, 29 Piece, Plastic,

  • 29 Piece Cake decorating set for professional bakers and beginner cake decorators.
  • Set contains: 26 decorating tubes including writing, star, leaf, rose, grass, basketweave, flower tubes and other tubes.
  • Also contains: 2 flower nails, a standard coupler, instructions and a plastic storage box..
  • Tubes and Flower Nails are made of stainless steel.
  • Hand wash and dry stainless steel tubes for best results.
  • Family run since 1905, Ateco has produced specialized professional quality baking and decorating tools for professional pastry chefs and discerning home bakers alike.
Check Stock

5pc Set - Stainless Steel T316 Lifeline Hand Swage Stud End Fitting- for 1/16 Cable

  • Type 316 Stainless Steel Lifeline Hand Swage Stud End Fitting for Cable Railing- For 1/16" Cable.
  • High Quality - Marine Grade For Maximum Corrosion Resistance.
  • Cable Size: 1/16" - Thread: 1/4" - Thread Length: 1-7/8" - Overall Length: 4-3/16".
  • Includes 5pcs - Each Piece Comes With: Stud, Nut, Washer & Cap Nut ( As Pictured).
  • A Swage Tool Is Required For Crimping - Please See Our Amazon Storefront For Swaging Tool.
Check Stock

Rejekar Replacement Part for Charbroil Advantage Series 4 Burner 463240015 463240115 463343015 Repair Kit Stainless Grill Heat Tent Shield Plate Pipe Burners Adjust Carryover Tube & Ignitors

  • Replacement for Charbroil Advantage Series 4 Burner Models: 463240015, 463240115, 463343015, 463344015, 463370015, 463433016 463642116, 466343015,....
  • Burner covers Dimensions: 15 1/8" X 2". Material : Stainless Steel . Original parts number: G458-0018-W1.
  • Burner Tubes Dimensions: 14 3/8" x 5/8". Material : Stainless steel. Original parts number: G432-8M00-W1.
  • Adjustable Carry over tubes Dimensions: Adjust from 5 to 9.5 inch.
  • Repair kit include 4pcs Stainless Steel steel heat plate, 4pcs Stainless steel grill burner, 3pcs Adjustable Crossover Tubes and 1pcs ignitors. Please....
Check Stock

ICOOL Hydraulic Tube Expander Swaging Tool Kit with Tube Cutter Deburring Tool 7 Expander Heads 3/8 to 1-1/8 Inches for Aluminum Copper HVAC Pipes

  • ...will get hydraulic tubing expander x 1, expanding heads x 7, tube cutter x 1, deburring tool x 1, carrying box x 1. A hard plastic storage case keeps tools easy transportation, storage and portability, instructions also provided for easy and professional use..
  • 【Good Tools】Our HVAC Hydraulic Tube Expander Compact Swaging Tool Kit is ideal for HVAC/R, plumbing, heating, gas, refrigeration and air conditioning systems instillation and maintenance. A must have tool for a HVAC tech..
Check Stock

PUXING Swaging Tool Drill Bit Set 6pcs Professional Manual Copper Pipe Swage Tool Drill Bit w/Triangular Handle HVAC Repairing Set Include 7/8 3/4 5/8 1/2 3/8 1/4 Bits

  • ✔️Material: Made of ball bearing steel, it is practical and durable. The flares will always have the same size and will fit perfectly.
  • ✔️Innovation: Revolutionizing system for molding tubes using heat by friction way more surface of contact between the flare and the Valve..
  • ✔️Usage: Air conditioning installation, open copper tube, so that two copper tube mutual link.(To be installed on hand electric drill).
  • ✔️Replace: You can use it to replace the old or brocken one. Package: Our package come with 6pcs copper pipe swaging tool drill bit.It is a good....
  • ✔️Easy to Install: Perfect for installers, no matter if you are just learning or have been doing it..
Check Stock