Top Stainless Steel U bolt

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 8 Trampoline Poles (with 8 pole caps) Trampoline Pole Foam Sleeves - Fits 15ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 15ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 6 Trampoline Poles (with 6 pole caps), Trampoline Pole Foam Sleeves - Fits 8ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 6 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 6 trampoline pole caps and 12 u-bolts (2 U-bolts for each pole)..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 8ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 6 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions.
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 12 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 6 Trampoline Poles(with 6 pole caps)Trampoline Pole Foam Sleeves - Fits 7.5ft Round Trampoline Frame - Installs Outside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 6 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 6 trampoline pole caps and 12 u-bolts (2 U-bolts for each pole)..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 6 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions.
  • Net for Trampoline: The trampoline net included in this set installs outside the frame. It is compatible with 7.5ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • U-Bolts: A set of 12 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

(4) Stainless Steel Square U-Bolts Boat Trailer U Bolt Ubolt 1/2\ D x 3 1/16\ Inside Width x 5 5/16\ Inside Length

  • Overall Size: 100 x 64.2mm / 3.94 x 2.53"(L*W).
  • Perfectly Suitable for Square Tube Size: 50 x 50mm / 1.97"..
  • ∪Product Features: Strong and durable, rust resistance, moisture resistance, and corrosion resistance. The surface without burr and thread good grip, u clamp still perform well in rainy and humid seaside environment..
  • ∪Application: Square U-Bolt Used on fix or connect the locked parts to rectangular wood and metal objects, such as cars, RVs, sailboat trailers, pipe, tube, plumbing and other Industrial Applications..
  • ∪Steps for Usage: 1. Choose the corresponding square U shaped bolt according to the size of the pipe. 2. Drill Holes in the Connection. 3. Lock Nut and Flat Washer..
  • ∪Package Content: 4 x U bolts, 4 x plates, 8 x nuts, 8 x flat washers..
Check Stock

2 Inch Clamps Heavy Duty 2" Stainless Steel U Bolt Muffer Exhaust Clamp Hanger for Pipes (51mm)

  • Package Includes: One Piece 2" Heavy Duty U-bolt Clamp (fit for OD 2 inch exhaust pipes).
  • The 2" stainless steel exhaust hanger with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use..
  • The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts..
  • Please check the detail information as belows. Emotor Industries value your shopping experience and strive to offer high quality product with sincere service. If you have any questions, please contact us..
Check Stock

Tigeracing Tie Down Anchors+MZS Leveling Kit 1\ Rear Lift Blocks Compatible with 2015-2020 F250 350 Super Duty

  • Compatibility fits 2015-2020 F250 350 Super Duty, 4 Piece tie downs are for F150 rear holes,B07V35TGV9 and B07V425TTC are for front holes. 2..
  • Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds!Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws,make it safe and stay on all the time when driving!.
  • Perfect Fit & Precise Structure : Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Advanced spray-paint technology not afraid of being scratched.Fearless of the wind, dust, rain and snow..
  • Note: U-bolts are required for installation, U-bolts are NOT included in this kit. Some vehicles are equipped with 2" or 4" rear factory blocks. Lift height will vary based on size of existing block being replaced..
  • Easy installation: MZS leveling kit can be installed in about 1-2 hours, does not require special tools. A front end alignment back to factory spec is recommend after install..
Check Stock

PINGEUI 2 Pack 3 Inch Stainless Steel U Groove Wheel, U Groove Caster with Bracket for Sliding Gate, Rolling Gate, Inverted Track, Industrial Machines, 882 lbs Capacity

  • STAINLESS STEEL MATERIAL - Made of thick 304 stainless steel, the stainless steel U groove wheel is sturdy, corrosion-resistant, wear-resistant and rust-proof. They have strong hardness and strength and can be used for a long time..
  • HIGH-QUALITY BALL BEARINGS - The double ball bearing design allows you to easily open and close your gate. Your gate will move quietly and smoothly to reduce noise. High-hardness bolts can firmly secure the U groove wheel to ensure its normal operation..
  • STRONG LOAD CAPACITY - You will receive 2 packs of stainless steel groove wheels. Each wheel has a load capacity of 882 lbs. The wheel diameter is 2.6 inches (68 mm), the groove width is 0.86 inches (22 mm) and the groove depth is 3/8 inches (10 mm)..
  • MUTI-APPLICATIONS - These U groove casters can be widely used in various places, such as sliding gates, factory gates, inverted rails, garden gates, heavy trolleys, container racks, industrial machinery rail projects and so on..
  • AFTER-SALES SERVICE - We hope you are satisfied with our U groove wheel for gate, which is why we provide you with a risk-free purchase. If you have any questions or dissatisfaction with our product, please feel free to contact us. We'll get back to you within 24 hours. This product comes with a 30-day m....
Check Stock

304 Stainless Steel Square U-Bolts Boat Trailer (1/2\ D x 3-1/16\ W x 5-5/16\ L),U Bolt Fit 3\ x 3\ Square Trailer Frame(4PCS)

  • U-bolt Size: 1/2" D x 3-1/16" W x 5-5/16" L, thread length: 2 1/2" inches, suitable for 3*3 square trailer frame.
  • Material Type: 304 stainless steel, all accessories are made of 304 stainless steel.
  • You Can Get: (4) U-shaped bolts, (8) flat washers, (8) lock washers, (8) hexagonal nylon inlay nuts, these are half the price of the hardware store..
  • Tip: It is recommended to use lubricant when installing, and use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts.
  • After-sales: After the purchase is not suitable, or if you encounter problems, please feel free to send us an email through Amazon, and we will solve it for you within 12 hours.
Check Stock

Square U-Bolt Stainless Steel Square Bend U Bolts with Nuts and Frame Plate for Automobiles Trailer Ski Boat or Sailboat Trailer 2 W x 4.3 L ,M10*50 * 120

  • 1.What You Get: 4 U-bolts, 8 hexagon nuts, 4 plates, these additional accessories are galvanized as well. You can spend less time doing your work with these handy tools!.
  • 2.Quality Material: Made of 304 Stainless Steel, with great performance in anti-rust and corrosion resistance, it can be used outside and withstand harsh weathers..
  • 3.Strong and Sturdy: Strong and durable, rust resistance, moisture resistance, and corrosion resistance. The surface without burr and thread good grip, u clamp still perform well in rainy and humid seaside environment..
  • 4.U-bolt Size: 2 " W x 4.3 L", thread length: 2 inches, suitable for 2" x 2" square beams and shafts, (Please check the size carefully before order).
  • 5.Widely Used: The M10 square U-bolts are great tools to fix or connect the locked parts to pipes, wood, etc. Suitable for boats, plumbing, and other home and industrial applications..
Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

  • Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
  • W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
  • VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
  • Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
  • The antenna does not come with mast pole mount.
  • it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
  • Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
  • HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..
Check Stock

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

WAVESRX Boat Trailer Hitch Tightener & Stabilizer | Stainless Steel Anti-Rattle Clamp for 2\ Hitch Receivers | Marine Grade, Rust-Free, Long-Lasting U-Bolt for Safe Transportation of Your Watercraft

  • ...or universal use and perform poorly in harsh marine conditions that boat trailers are often subjected to. How often did you find yourself struggling to remove a steel nut that has been seized by salt and corrosion? We certainly had, so when we designed our hitch tightener for boat trailers, we used 316 Marine Grade Stainless Steel U-bolt, nuts and washers, to ensure Corrosion-Free & Rattle-Free Towing..
  • UNIVERSAL FIT AND EASY INSTALLATION - If your vehicle has a 1.25" (32 mm) or 2" (50 mm) hitch for towing a Boat or a Jet Ski, you can Quickly and Effectively secure it using our Premium Hitch Tightener Clamp. Just place the black tension plate on the bottom with the angled lip pointing up and away from your vehicle, insert the U-Bold from the top over the towing hitch and secure it from the bottom using the included washers and nuts (see product images for recommended installation position)..
  • FREE BUNDLED EXTRAS & BONUS FEATURES - When it comes to product value, we don't believe in cutting corners by eliminating essential features or components. That's why included in the box you'll find a Rubber Coated Stainless Steel U-Bolt (for complete weather and scratch protection), a Reinforced Bottom Plate (for durability and longevity), Two Stainless Steel Flat....
Check Stock