Top Stainless Weld Neck Flanges

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Secrets of Silicon Valley

  • ...r strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 8277 WaterWeld Epoxy Putty Stick - 2 oz.

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

IPS AAB4 Weld-On 1.25 oz Applicator Bottle with Needle

  • For use with Weld-on #3 and Weld-on #4 Acrylic Plastic Cement.
Check Stock

J-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey

  • J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
  • MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Necygoo Weld Gauge Set Stainless Steel 0-60mm Cam Type Gauge and 3.2mm-25.4mm 1/8''-1'' Weld Fillet Gauge with Bag Imperial Metric Measurement Welding Gauge

  • ❤WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 2 x Instructions, 2 x Bags. This Weld Gauge, with Imperial Metric Measurement, is Suitable for Measuring Length, Height, Width and Angle for Welding..
  • ❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree..
  • ❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” ..
  • ❤STAINLESS STEEL GAUGE❤ Both Gauge Are Made of Stainless Steel, Which is Very Durable and Won’t Be Bended Easily. With Smooth Surface and Clear Scale (Please Be Careful for The Sharp Edge When Use)..
  • ❤PACKAGE❤ Package Includes A Cam Type Gauge, A Weld Fillet Gauge and Manual. If You Have Any Question, Please Contact Us..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

SYKRSS 3.0 Mild Steel V Band Clamp Flat Flange Kit Assembly

  • Material-Each assembly consists of two Mild Steel flanges and one 304 Stainless Steel V-band clamp. The V-band clamp design allows for a gasket free....
  • Application- The V-Band Clamps makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes and the....
  • Excellent Sealing-The V-band clamp applies uniform force around the flange maximizing the seal potential of the flanges, Once tightened, friction....
  • The 3.0" v band clamp fit for 3 Inch O.D. pipe. Of course, we can't only provide you with mild steel V band flange clamp kit, also have stainless....
  • This item is not vehicle specific. It is compatible with a wide range of applications. Please review the specifications and verify compatibility prior....
Check Stock

J-B Weld Company 8265-S 3 Pack Original Steel Reinforced Epoxy Twin Pack, Dark Grey

  • J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Maymom Breastmilk Storage Bag Adapters Compatible with Spectra S1 S2 Pumps 2 Duckbill Valves Included Clear BPA Free Material Boiling Water OK Do Not Use Microwave or Steamer Bag to Sanitize

  • The patented adapters (2 pc in this listing) allow you to pump directly into most popular breastmilk storage bags like Lansinoh and Nuk. Patented in....
  • No milk loss due to transferring from collection bottles to bags.
  • Clear in color for seeing the milk coming out during pumping..
  • Fits most wide neck breastshields (Spectra S1/S2 wide mouth flanges).
  • NOTE: There is stainless steel in the product. DO NOT place the product in a microwave oven or steamer bag for sterilization. Use boiling water for....
  • Material: Heavy duty polypropylene(PP), BPA free. Stainless steel spring..
Check Stock

J-B Weld WaterWeld 1 Hour Cure Epoxy Putty Stick - 2 Pack Off-White 8277-2

  • J-B WELD WATERWELD: A hand mixable two part epoxy putty stick, that can cure under water and is ideal for repairing plumbing, fuel tanks, tubs and showers, drains, pool and spa, boats & potable water tanks and more! J-B Weld WaterWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock