Top Stainless Weld

Cup Drying Stander Holder for Cup Turner Machine Kit, Drying Stander Holder with Pipe, DIY Glitter Epoxy Tumblers Cup Turner Kit (Rack, White)

  • ...r strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water.
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey.
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped.
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
Check Stock

Spot Weld Cutter Set，13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding

  • [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets.
  • [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch..
  • [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel..
  • [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 "cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

HZXVOGEN Multifunctional MIG Welder 110V 220V 185A with Color LCD Display IGBT Inverter MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine Model MIG185Ⅱ

  • ★ THE COOLEST AND PLEASANT MULTIFUNCTIONAL WELDER - HZXVOGEN MIG185Ⅱwelder came with color LCD display with make the setting parameter very easy....
  • ★ MIG FUNCTION - HZXVOGEN MIG185Ⅱwelder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld....
  • ★ LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a....
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little....
  • ★ IMPORTANT NOTE - This welder can work on both 110V and 220V. The “SIM” ”SIG” is for dual pulse function, but this welder does not have....
Check Stock

J-B Weld 50176 KwikWeld Steel Reinforced Epoxy Syringe - Dries Dark Grey - 25 ml 3 PACK

  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of....
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set....
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And....
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc.
Check Stock

EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter..
  • WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency..
  • EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes..
  • DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills..
  • APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets..
Check Stock

TOOLIOM 135A Flux Core Welder MIG Welder 110V Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT DC Inverter

  • Weld up to .030"(0.8mm) and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode..
  • Powered By Standard 110(120V) Household Current..
  • Multi-functions in one machine:Suitable for MMA,Lift Tig,Flux Mig.Can weld stainless steel and carbon steel..
  • Big enough to handle 2 pounds rolls of wire..
  • Powerful Machine:Up to 135A output current that can weld mild steel up to 1/8 inch (3.0mm) plate..
Check Stock

FORZA FEYER MIG 140 Welder Portable Flux Core Wire Automatic Feed 140 Welder Welding Machine w/Free Mask ARC 110V with Welding Gun,Work Clamp Input Power Adapter Cable and Brush Orange

  • Powerful Capable:0.8-1.0mm flux core wire. Dedicated 110 AC, 60 Hz.Up to 140 Amp output that allows you to weld mild steel, weld steel, stainless....
  • Control Mode:MIG 140 welder has Synergic Adjustment Function, no need to match working voltage and feeder speed seperately,easy to operate. 1-110V....
  • Portable & SAFE :This 140 welder features a easy carrying handle,compact design, Heavy duty stainless steel machine with Electric choke control, less....
  • WELDING PROCESS:The 140 welder working principle of Synergic Co2 gas shield Mig welder is to rectify AC input current to direct current, and then use....
  • Wide Application:The welder has a adjustable wire feed speed and welding current, easy to start arc, allow weld raw steel, white steel, staircase,....
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ...rts gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed and output voltage will be auto matched. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam. Solid wire with gas welding stainless steel. Flux-cored wire without gas welding iron and carbon steel..
  • ★LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable current, and good performance..
  • ★ 1 YEAR WARRANTY AND GREAT AFTER SELL SERVICE- HITBOX welder offers good warranty. If the machine can not work have other problem when working, please contact us at the first time, we can help you to fix it and we have agent in the United States, our agent will repair it for you. If finally we can not solve the problem, we will send you a new replacement..
Check Stock

Ledaut O2 Oxygen Sensor Mounting Boss and Plugs (2 Bungs/ 2 Plugs) Notched Style Oxygen Sensor Fitting Bungs M18X1.5

  • Notched style O2 oxygen sensor mounting bung was made of 304 stainless steel easy to weld ..
  • The oxygen sensor plugs was made of plated mild steel with zinc plating..
  • The size of our oxygen sensor plugs M18 x 1.5 thread, fit for all standard O2 sensors..
  • Weld bung and plugs was easy to weld and offer fantastic value for the user..
  • Designed to adding a 02 sensor in any place you need one . Great for custom exhaust installation,headers,down pipes etc..
Check Stock

CWI Gifts 18" Rustic Cotton Snowman Pick, Multi

  • Made of stainless steel, is not easy to bend, accuracy of reading.
  • Measurements read in standard on one side, and metric on the opposite side.
  • The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings.
  • Welding Gage is designed for internal alignment and determining root weld spacing.
  • The gauge measures internal mismatch of pipe wall, scribe lines, weld fillet and crown height.
Check Stock