Top Standard Locknut

DERNORD 2 Inch (OD64) Tri-clamp 240V 2500W Foldback Heating Element Electric Water Heater with Low Watt Density

  • SUS304 Tri-clamp Foldback heating element provides 2500w 240v of power.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

DERNORD 2 Inch (OD64) Tri-clamp 120V 1500W Foldback Heating Element Electric Water Heater with Low Watt Density

  • SUS304 Tri-clamp Foldback heating element provides 1500w 240v of power.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Gardner Bender LNW-KIT Locknut Wrench Kit, ½ & ¾ Inch., Loosen / Tighten locknuts, Steel Construction fits UL locknuts, 2 Pk. Bundle, Black

  • Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts.
  • Etched markings allow for easy identification.
  • clearly marked tighten and loosen ends make usage a breeze.
  • Thin design allows easy maneuvering in tight locations while durable steel construction makes it strong enough to get the job done.
  • Hooked tip latches onto locknut and maximizes turning leverage.
  • Kit contains one ½ inch wrench (LNW-500) and one ¾ inch wrench (LNW-750).
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

LITTLE GIANT DuraFork Pitch Fork Replacement Head (Green) Durable Polycarbonate Stable Fork Head with Angled Tines (Item No. PDF103GREEN)

  • POLYCARBONATE CONSTRUCTION - This stable fork heads' polycarbonate design offers superior flexibility and strength..
  • ANGLED TINES FOR LESS SPILLING - The pitch fork head has angled tines result in less spilling through the tines of the fork and overall less mess..
  • FORK DIMENSIONS - This pitch fork head's tines are 13.125 inch long by 15.125 inch wide..
  • NYLON LOCKNUT ATTACHMENT - The pitchfork head attaches to the handle by nylon locknut that offers firm attachment to the pitchfork handle..
  • COLOR OPTIONS AVAILABLE -These pitch fork heads come in several colors included: Berry Blue, Black, Blue, Burgundy, Green, Hot Pink, Lime Green, Orange, Purple, Red, Teal..
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

Norotos Mil-Spec Original USGI PVS-7 PVS-14 Night Vision Goggle NVG Rhino Mount MICH/ACH/CVC Helmet Front Bracket Assembly Only, without Screw and Locknut, A3297308, Black

  • Designed for the PVS-7 and PVS-14 NVG Rhino mount.
  • Compatible with any device that mounts to the standard NVG mounting plate.
Check Stock

20mm 24mm Lock Nut Remover Clutch Removal Tool Compatible with ATC 110 125 ATC 90 CA 200 CB 200 Bike,4-Pin Spanner Socket Wrench for Taotao Roketa SSR ATV Dirt Bike

  • Compatible with Combo Gl 1200 1984 1985 1986 ,Replace special tool: # 07716-0020100, 07vma-mbb0100-101,Removes locknut: 90231-0231-028-000,....
  • Compatible with HODA ATC 110 125 ATC 90 CA 200 CB 200 Crf 600rr 450r 250l Bike Taotao Roketa SSR ATV Dirt Bike.
  • Fit for 14mm clutch locknut on crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994, cl, ct, sl & xl models. Crf50, z50, xr50,....
Check Stock

Milwaukee 5 Pack - 4 1 2 Hubbed Grinding Wheel for Grinders - Aggressive Grinding for Metal & Stainless Steel - 4-1/2\ x 1/4 x 5/8-Inch | 11 UNC | Depressed

  • 5 Milwaukee Premium Hubbed Grinding Wheels | 4-1/2-Inch X 1/4 X 5/8-Inch | 11 UNC - For Metal & Stainless Steel.
  • 1/4" Thick Type 27 Depressed Hubbed Grinding Wheel Design For both Maximal Stability & Long Lasting Life.
  • Single Step Mount & Grind Wheel without the need for a Grinder Inner Flange or Locknut.
  • Engineered in Brookfield WI for Milwaukee 4-1/2 inch Angle Grinders & other 4-1/2 inch grinders with standard 5/8" - 11 UNC spindle thread | Coarse 24 Grit Count For Aggressive Grinding Action.
  • Consistent performance from wheel to wheel through superior manufacturing process. Tested for balance, resulting in smooth, vibration free grinding. Milwaukee Electric Tool Corp, Brookfield WI 53005 USA.
Check Stock

APEX: The Story of the Hypercar

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels m....
Check Stock

Roadformer 2' T-Bolt Hose Clamp - Working Range 56mm - 64mm for 2' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (56mm - 64mm, 2 pack)

  • Roadformer 2" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 2" T Clamp Working Range: Diameter 2.2" - 2.52" same as 56mm - 64mm for 2 inch Hose I. D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock