Top Starting Motor

IMAYCC 80cc Bicycle Engine Kit, 2-Stroke Motorized Bicycle Kit Fit for 26-28' Bikes, Bicycle Motor Engine Kit with Wired Digital Computer (Silver)

  • ...inder gasoline engine, wired digital computer, the engine power/speed is 2.1Kw/5000rpm, so you can enjoy a faster riding speed, the upgraded bicycle has better durability and supports long-distance riding, make it easier to use outdoors..
  • 【80cc Bike Motor Kit】Engine type: single-cylinder, air-cooled, two-stroke. Starting method: foot pedal starting. Ignition method: CDI ignition. Number of sprocket teeth: 44 teeth. Number of chain teeth: 110 knots. Spokes: 36..
  • 【Bicycle Motor Compatibility】IMAYCC bike engines are suitable for most 26-28″ wheeled bikes (mountain bikes, cruisers, motorcycles, road bikes) with V-frames. There should be 10″ and more clearance between the bottom bracket and top bar of the frame..
  • 【2.5L Black Teardrop Fuel Tank】Fuel type: 90#, Mixing Ratio of Fuel and engine Oil: 16:1 for new equipment, 20: 1 the run-in period (after running 500km). Driving on a smooth road at a speed of 20-25Km/h, fuel consumption of 2-2.5L per 100Km..
  • 【Notes】The rider needs basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments. If you do not have experience or the first time on installing the motor kit, before installing, please kindly read our instruction and search “80cc bicycle engine kit” ....
Check Stock

Hamilton Beach HMD400 120V Triple Spindle Commercial Drink Mixer

  • Cup Activated: Operators can start and stop mixing action by inserting the cup into the cup guide or by using the pulse switch on the top of the mixer..
  • Hands-free Operation: Provided by two level cup rest. Holding cup in upper position of cup rest activates motor. Lower position holds cup in place without starting motor..
  • 3-Speed Universal Motors: Built to last with permanently sealed ball bearings. Each motor is individually balanced to minimize vibration. Operator can easily replace motor in minutes..
  • Easy to Clean: Smooth housing made of stainless steel and heavy-duty die-cast aluminum wipes clean easily. The cup guide also removes for dishwasher safe cleaning..
  • Sealed Rear Housing: The airflow design within the mixer does not require venting, which eliminates risk of water ingress and motor failure..
Check Stock

3D Dental HP-PB Hyrdolux Push Button Hand Piece

  • Wind has light weight, small size, and shape is better than similar products..
  • The wind wheel runs smoothly, reliably and quietly..
  • The motor adopts unique magnetic circuit design, and its starting torsion is very small, which can effectively guarantee the starting ability of breeze..
  • The design of wind blade accords with the aerodynamic principle..
  • The blades are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti‑ultraviolet and anti‑corrosion materials..
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • Automatic Submersible Sump Pump: with integral diaphragm switch activates when Water reaches 7 to 10 inches and shuts off when Water drops down between 1 and 4 inches.
  • Built To Last: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • Continuous Duty Motor: 1/3 HP shaded pole Motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • Applications: designed for sump Pump systems and general Water transfer application.
  • must sit in Water to activate the switch.
Check Stock

Little Giant 9S-SMPXRT-K 4/10 HP, 115-Volt, 6000 GPH Pre-Packaged Simplex Sewage Basin/Pump System - Assembly Required, Black/Blue, 509074

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

Little Giant 6-CIA 115 Volt 1/3 HP 2760 GPH Cast Iron Automatic Submersible Sump Pump with Integral Diaphragm Switch 10-Ft Cord Blue 506158

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for sump pump systems and general water transfer application.
  • must sit in water to activate the switch.
Check Stock

Bussman BP/SL-20 20 Amp Tamper Proof Plug Fuses 3 Count

  • Non-interchangeability prevents installing a higher amp fuse than the circuit was designed for.
  • Has ability to withstand typical motor starting surges.
  • Use in residential or light-duty motor circuits.
Check Stock

Heat Powered 4 Blades Stove Fan,Silent Flue Pipe Fireplace Fan, Eco-Friendly on Chimney for Wood Log Burner Fireplace

  • ❤2021 New Upgrade❤New fan blade ,Faster Speed,Larger Air Volume, Lower starting temperature,Lower noise,Motor has a longer service life, More solid and durable,Highest performing.Never need to turn it on or off, Start working automatically when the starting temperature is reached.Reinforced 4 Blades,Made of premium anodized aluminum, the heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones..
  • ❤Working principle❤Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly..
  • ❤ Energy saving❤ the thermoelectric module acts as a small generator to power the fan motor. No batteries or electricity needed! The improved hot air circulation and ensures greater comfort ,while reduces the wood consumption of the stove..
  • ❤Space saving ❤The stove fan can be Fixed on the chimney Pipe of Wood/Log Burner/Fireplace , it is stable for Incline surface and won't take up more space..
  • ❤Quiet, no noise❤ The only moving part is the blade assembly, quiet and no noise generate. You will not even know this fan is there, but you w....
Check Stock

(New) 23405SER 23405 JA2C028-1 Exhaust Fan Motor Replacement for compatible with Broan Nutone fits 8661 8662 8671 8672 8831. + all models in description

  • This Motor will keep your NuTone Exhaust Fan working for years to come..
  • The 23405-SER motor was used on the finest quality NuTone Exhaust Fans.
  • and Fan/Lights starting in the 1960's and used through the early 1980's..
  • The 23405-SER motor has unique hexagonal motor ends, making it easy to recognize.
Check Stock

Fencia DC Motor Speed Control PWM Controller 10V-50V 5000W MAX 100A + Pedal Accelerator

  • ⭐ Larger current, max current up to 100A, continuous operating current of up to 60A. Power requirement: DC 10-50V, frequency: 15khz, control motor power: 0.01-5000w..
  • ⭐ Reversing control motor, dual relay control, can withstand higher current. Programmable to meet subsequent extensions..
  • ⭐ With soft start to reduce the shock of large current when the motor starting. With brake when the power off or change the rotation of the motor..
  • ⭐ Quiescent current: 0.04a, regulation range: 0-100%, size: 145*78*38mm/5.7*3.07*1.49in..
Check Stock

Wind Generator, Windmill Generator, Small 5 Blade 400W Lightweight Office for Home(24V)

  • The motor adopts unique magnetic circuit design, and its starting torsion is very small, which can effectively guarantee the starting ability of breeze..
  • Wind has light weight, small size, and shape is better than similar products..
  • The blades are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti‑ultraviolet and anti‑corrosion materials..
  • The wind wheel runs smoothly, reliably and quietly..
  • The design of wind blade accords with the aerodynamic principle..
Check Stock

Wind Turbine Generator, Lightweight Small 400W Windmill Generator, for Home Office(24V)

  • Wind Turbines has light weight, small size, and shape is better than similar products..
  • The design of wind Turbines blade accords with the aerodynamic principle..
  • The motor adopts unique magnetic circuit design, and its starting torques is very small, which can effectively guarantee the starting ability of breeze..
  • The blades are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti-ultraviolet and anti-corrosion materials..
  • The wind wheel runs smoothly, reliably and quietly..
Check Stock